Samuel Higley

Last updated
Samuel Higley memorial Dr. Samuel Higley memorial - Simsbury, CT - DSC00614.jpg
Samuel Higley memorial

Samuel Higley was born in Simsbury, Connecticut and for two years attended the Collegiate School, later Yale University. Afterwards he became a teacher and pupil of physician Thomas Hooker. He was eventually granted license to practice as a medical doctor. He was also a practicing blacksmith, to whom in 1728 the Connecticut General Court granted exclusive rights for making steel for a period of 10 years. Upon the death of his father, Higley inherited land near Simsbury, known as Copper Hill, which he augmented by purchase of 143 acres. Here about 1730 he settled. By early 1733, Higley had begun mining copper on his own property.

The first so-called "Higley coppers" (Trader's Currency Token of the Colony of Connecticut) bear the date 1737. Although there is no firm evidence that links Higley to coin minting, since colonial times he has been associated with these Connecticut tokens. Certainly he had the copper necessary, as well as the skill to make steel dies. Of the 1737 coppers, four varieties have an obverse with legend THE VALUE OF THREE PENCE and roman numeral III. A listing of Higley coppers by Daniel Freidus lists 15 varieties in total, from 8 obverse and 5 reverse dies. Since most Higley Coppers are double struck, researchers believe that the hammer method rather than a screw press was used to make them. The sizes of these coins varied, but they were approximately the size of a modern half-dollar.

Related Research Articles

<span class="mw-page-title-main">Granby, Connecticut</span> Town in Connecticut, United States

Granby is a town in far northern Hartford County, Connecticut, United States. The town is part of the Capitol Planning Region. The population was 10,903 at the 2020 census. The town center is defined as a census-designated place known as Salmon Brook. Other areas in town include North Granby and West Granby. Granby is a rural town, located in the foothills of the Litchfield Hills of the Berkshires, besides the suburban natured center, the outskirts of town are filled with dense woods and rolling hills and mountains. From the 1890s to the 1920s many immigrants from Sweden came to reside in the town.

<span class="mw-page-title-main">Two-cent piece (United States)</span> Coin of the United States (1864–1873)

The two-cent piece was produced by the Mint of the United States for circulation from 1864 to 1872 and for collectors in 1873. Designed by James B. Longacre, there were decreasing mintages each year, as other minor coins such as the nickel proved more popular. It was abolished by the Mint Act of 1873.

The British farthing was a British coin worth a quarter of an old penny. It ceased to be struck after 1956 and was demonetised from 1 January 1961.

<span class="mw-page-title-main">Indian Head cent</span> American one-cent coin (1859–1909)

The Indian Head cent, also known as an Indian Head penny, was a one-cent coin ($0.01) produced by the United States Bureau of the Mint from 1859 to 1909. It was designed by James Barton Longacre, the Chief Engraver at the Philadelphia Mint.

This glossary of numismatics is a list of definitions of terms and concepts relevant to numismatics and coin collecting, as well as sub-fields and related disciplines, with concise explanations for the beginner or professional.

<span class="mw-page-title-main">Coins of Lundy</span>

The coins of Lundy are unofficial issues of currency from the island of Lundy, in the Bristol Channel off the west coast of England. Two bronze coins, the "half puffin" and "one puffin", were issued with a 1929 date and featured a portrait of Martin Coles Harman who owned the island and was responsible for the issue. The coins were struck again with slightly modified designs and updated dates in 1965, 1977, and 2011, as commemorative tokens not intended for circulation.

<span class="mw-page-title-main">Flying Eagle cent</span> One-cent piece struck by the Mint of the United States

The Flying Eagle cent is a one-cent piece struck by the Mint of the United States as a pattern coin in 1856 and for circulation in 1857 and 1858. The coin was designed by Mint Chief Engraver James B. Longacre, with the eagle in flight based on the work of Longacre's predecessor, Christian Gobrecht.

<span class="mw-page-title-main">Shield nickel</span> First US five cent piece to be made out of copper-nickel

The Shield nickel was the first United States five-cent piece to be made out of copper-nickel, the same alloy of which American nickels are struck today. Designed by James B. Longacre, the coin was issued from 1866 until 1883, when it was replaced by the Liberty Head nickel. The coin takes its name from the motif on its obverse, and was the first five-cent coin referred to as a "nickel"—silver pieces of that denomination had been known as half dimes.

<span class="mw-page-title-main">Conder token</span> Late 18th Century token coinage in the British Isles

Conder tokens, also known as 18th-century provincial tokens, were a form of privately minted token coinage struck and used during the later part of the 18th century and the early part of the 19th century in England, Anglesey and Wales, Scotland, and Ireland.

A trader's currency token was issued by Samuel Higley of Simsbury, Connecticut in 1737. Higley owned the mine which produced the copper, which was near Granby, Connecticut. He smelted the copper ore, designed and engraved the dies, and struck the tokens himself. They wore out extremely easily, due to the purity of the copper.

<span class="mw-page-title-main">Penny (British pre-decimal coin)</span> Former denomination of sterling coinage

The British pre-decimal penny was a denomination of sterling coinage worth 1240 of one pound or 112 of one shilling. Its symbol was d, from the Roman denarius. It was a continuation of the earlier English penny, and in Scotland it had the same monetary value as one pre-1707 Scottish shilling. The penny was originally minted in silver, but from the late 18th century it was minted in copper, and then after 1860 in bronze.

<span class="mw-page-title-main">Lincoln cent</span> One-cent United States coin

The Lincoln cent is a one-cent coin that has been struck by the United States Mint since 1909. The obverse or heads side was designed by Victor David Brenner, as was the original reverse, depicting two stalks of wheat. The coin has seen several reverse, or tails, designs and now bears one by Lyndall Bass depicting a Union shield. All coins struck by the United States government with a value of 1100 of a dollar are called cents because the United States has always minted coins using decimals. The penny nickname is a carryover from the coins struck in England, which went to decimals for coins in 1971.

<span class="mw-page-title-main">St Patrick halfpenny</span>

The St Patrick halfpenny was a milled coin minted in the 17th century in England, Ireland and Wales. The reverse design shows King David kneeling playing a harp while gazing up at the royal crown of England. One peculiarity of the harp is that it bears a semi-nude winged female figure on the pillar, a feature which became common on English coins beginning in the second quarter of the 17th century. The legend on the obverse reads FLOREAT REX.

<span class="mw-page-title-main">Two-cent billon</span>

The two-cent billon was a pattern US coin struck in 1836 and initially proposed as part of the Act of January 13, 1837. Versions exist with either a reeded edge and coin orientation or a plain edge and medal orientation; however, those with the former tend to be original strikes, whereas the latter are always proof restrikes.

<span class="mw-page-title-main">Blacksmith token</span> 1800s Canadian counterfeit-like currency

Blacksmith tokens are a form of evasion currency that was in circulation primarily in Lower Canada and Upper Canada along with neighboring areas, such as the northern parts of New York and New England in the mid-1820 to 1830s. They were not, strictly speaking counterfeits, but instead skirted around the laws of the time by being similar to officially circulating coinage, but bearing different legends, or bearing no legends or dates at all, so it could not be claimed that they were truly imitating circulating coinage fully. The tokens were designed to resemble worn examples of English or Irish copper coinage, most often with a crude profile of either George II or George III in profile on the obverse and an image of Britannia or an Irish harp on the reverse. They were typically underweight when compared to officially sanctioned halfpenny coinage, but were accepted along with many other unofficially issued tokens due to a lack of sufficient small denomination coinage in circulation at the time.

<span class="mw-page-title-main">Bouquet sou</span>

Bouquet sou were a series of tokens that were created for use primarily within Lower Canada in the mid- to late-1830s. Roughly equivalent in value to a half penny, the "bouquet sou" were so called because they displayed a group of heraldic flowers tied together with a ribbon on their obverse. The group of flowers were encircled by one of several legends, which might say "Trade & Agriculture / Lower Canada", "Agriculture & Commerce / Bas Canada" or some variant of these that might also substitute the name of the issuing bank. The other side most typically gave the denomination of "un sou", surrounded by a wreath and the words "Bank Token" and "Montreal". There are a large variety of these tokens, distinguished primarily by the number and variety of flowers that appear in the "bouquet", along with the differences in the legends that appeared on either side of the token. They were initially issued by the banks of Lower Canada, and were later imitated by speculators who produced tokens that looked similar, but were underweight for their denomination. These coins also circulated to Upper Canada, as at least one archeology dig attests. Large numbers of these tokens were produced and many examples can easily be obtained for only a few Canadian dollars, though a few rare varieties can command significantly higher prices.

<span class="mw-page-title-main">Habitant token</span> Series of tokens used in Lower Canada from 1837

The Habitant token were a series of tokens that were created for use primarily within Lower Canada and were issued in 1837. Produced as a successor to the popular bouquet sous, these tokens depicted a Habitant on the obverse, a traditional depiction of a French-Canadian farmer in winter clothing, and the coat of arms for the City of Montreal on the reverse. The tokens were issued in both one penny/deux sous and half penny/un sou denominations by the leading commercial banks of Montreal. They were issued in large numbers and can be easily acquired by the modern collector, though some varieties are rare and command a premium.

<span class="mw-page-title-main">Vexator Canadiensis tokens</span>

The Vexator Canadiensis tokens are thought to be politically satirical tokens produced in either Quebec City or Montreal sometime in the 1830s. The tokens present a very crude image of a vaguely male bust on their obverse, and a female figure on the reverse. The legends on either side were deliberately designed so that they are hard to definitively read, but are commonly known as the "vexators" based on a common interpretation of its obverse legend. Depending on the interpretation of the inscriptions, they can either be taken as a form of satirical protest against either an unpopular Upper Canada governor, or William IV as a "tormentor of Canada", or more simply, depicting a fur trapper. Since all of these interpretations are possible, the ambiguity would allow the issuer from escaping being cited for sedition.

<span class="mw-page-title-main">William Joseph Taylor</span> British medallist, born 1802, in Birmingham; died March 1885, in London

William Joseph Taylor was a British medallist and engraver who produced a wide variety of medals and tokens throughout his career, including the majority of medals and tokens produced in London, as well as a notable enterprise in Australia which attempted to establish the continent's first private mint.

<span class="mw-page-title-main">Bust and harp tokens</span>

The Bust and Harp tokens were tokens originally issued anonymously in the mid-1820s, and circulated primarily in Lower Canada. Due to their anonymous nature, it is not known who placed the order for the original tokens, but they are believed to have been minted in England beginning in 1825. The initial release of the tokens was dated 1825, but a currency regulation issued that same year made the importation of privately issued tokens illegal. As a result, the initial issue was altered and all subsequent issues of these tokens were antedated to 1820 in order to get around this prohibition, which did not prohibit tokens made before this date. They were circulated in large quantities and were widely imitated by minters located in Canada, making for many varieties. Those of particularly poor craftsmanship are considered examples of Blacksmith tokens. They were roughly the size of a contemporaneous half-penny, though generally weighed less. They were widely circulated in Lower Canada for at least 30 years, after which banks began to refuse them as payment except by weight. The more common Bust and Harp tokens can be had for about a few tens of C$, though rarer varieties can command prices in the thousands of dollars.

References