FRD-903

Last updated
FRD-903
FRD-903.svg
FRD-903 3D BS.png
Names
Preferred IUPAC name
2,3,3,3-Tetrafluoro-2-(heptafluoropropoxy)propanoic acid
Other names
Perfluoro-2-propoxypropanoic acid, hexafluoropropylene oxide dimer acid (HFPO-DA), C3 Dimer Acid,
Identifiers
3D model (JSmol)
ECHA InfoCard 100.032.928 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 236-236-8
PubChem CID
  • InChI=1S/C6HF11O3/c7-2(1(18)19,4(10,11)12)20-6(16,17)3(8,9)5(13,14)15/h(H,18,19)
  • C(=O)(C(C(F)(F)F)(OC(C(C(F)(F)F)(F)F)(F)F)F)O
Properties
C6HF11O3
Molar mass 330.053 g·mol−1
AppearanceLiquid <60°C
Density 1.748g/cm³ (at 20 °C)
Soluble, 739 g/L [1]
Acidity (pKa)3.82
Hazards
GHS labelling:
H302, H314, H335
Hazards
GHS labelling:
GHS-pictogram-exclam.svg GHS-pictogram-acid.svg
NFPA 704 (fire diamond)
NFPA 704.svgHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
2
0
Flash point 60°C
Safety data sheet (SDS)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

FRD-903 (also known as hexafluoropropylene oxide dimer acid, HFPO-DA, and 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid) is a chemical compound that is among the class of per- and polyfluoroalkyl substances (PFASs). More specifically, this synthetic petrochemical is also described as a perfluoroalkyl ether carboxylic acid (PFECA) and a Fluorointermediate. [2] It is not biodegradable and is not hydrolyzed by water. [3] [4]

Contents

Production

The production process involves 2 molecules of Hexafluoropropylene oxide (HFPO) to produce Hexafluoropropylene oxide dimer acid fluoride (FRD-903), The ammonium salt of FRD-903 is FRD-902 (ammonium (2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoate)), which is the specific chemical which Chemours has trademarked as part of GenX process. [5] FRD-903 is used as an aid within the manufacturing process for fluoropolymers by reducing the surface tension in the process, allowing polymer particles to increase in size. The process is completed with chemical treatment or heating to remove the FRD-903 from the final polymer product. It can then be recovered for re-use within the process. [6]


Drinking water

In 2020 Michigan adopted drinking water standards for 5 previously unregulated PFAS compounds including HFPO-DA which has a maximum contaminant level (MCL) of 370 parts per trillion (ppt). [7] [8]

In March of 2023, the EPA announced drinking water standards for several PFAS chemicals, which included FRD-903. [9] [10]

Related Research Articles

<span class="mw-page-title-main">Polytetrafluoroethylene</span> Synthetic polymer

Polytetrafluoroethylene (PTFE) is a synthetic fluoropolymer of tetrafluoroethylene and is a PFAS that has numerous applications. The commonly known brand name of PTFE-based composition is Teflon by Chemours, a spin-off from DuPont, which originally discovered the compound in 1938.

<span class="mw-page-title-main">Cape Fear River</span> River in North Carolina, United States

The Cape Fear River is a 191.08-mile-long blackwater river in east-central North Carolina. It flows into the Atlantic Ocean near Cape Fear, from which it takes its name. The river is formed at the confluence of the Haw River and the Deep River in the town of Moncure, North Carolina. Its river basin is the largest in the state: 9,149 sq mi.

<span class="mw-page-title-main">Perchlorate</span> Ion, and compounds containing the ion

A perchlorate is a chemical compound containing the perchlorate ion, ClO4-, the conjugate base of perchloric acid (ionic perchlorate). As counterions, there can be metal cations, quaternary ammonium cations or other ions, for example, nitronium cation (NO2+).

<span class="mw-page-title-main">Perfluorooctanoic acid</span> Perfluorinated carboxylic acid

Perfluorooctanoic acid is a perfluorinated carboxylic acid produced and used worldwide as an industrial surfactant in chemical processes and as a material feedstock. PFOA is considered a surfactant, or fluorosurfactant, due to its chemical structure, which consists of a perfluorinated, n-heptyl "tail group" and a carboxylate "head group". The head group can be described as hydrophilic while the fluorocarbon tail is both hydrophobic and lipophobic.

<span class="mw-page-title-main">Perfluorooctanesulfonic acid</span> Fluorosurfactant and persistent organic pollutant

Perfluorooctanesulfonic acid (PFOS) is a chemical compound having an eight-carbon fluorocarbon chain and a sulfonic acid functional group and thus a perfluorosulfonic acid. It is an anthropogenic (man-made) fluorosurfactant, now regarded as a global pollutant. PFOS was the key ingredient in Scotchgard, a fabric protector made by 3M, and related stain repellents. The acronym "PFOS" refers to the parent sulfonic acid and to various salts of perfluorooctanesulfonate. These are all colorless or white, water-soluble solids. Although of low acute toxicity, PFOS has attracted much attention for its pervasiveness and environmental impact. It was added to Annex B of the Stockholm Convention on Persistent Organic Pollutants in May 2009.

<span class="mw-page-title-main">Thermal decomposition</span> Chemical decomposition caused by heat

Thermal decomposition is a chemical decomposition caused by heat. The decomposition temperature of a substance is the temperature at which the substance chemically decomposes. The reaction is usually endothermic as heat is required to break chemical bonds in the compound undergoing decomposition. If decomposition is sufficiently exothermic, a positive feedback loop is created producing thermal runaway and possibly an explosion or other chemical reaction.

<span class="mw-page-title-main">Fluorinated ethylene propylene</span> Polymer

Fluorinated ethylene propylene (FEP) is a copolymer of hexafluoropropylene and tetrafluoroethylene. It differs from the polytetrafluoroethylene (PTFE) resins in that it is melt-processable using conventional injection molding and screw extrusion techniques. Fluorinated ethylene propylene was invented by DuPont and is sold under the brandname Teflon FEP. Other brandnames are Neoflon FEP from Daikin or Dyneon FEP from Dyneon/3M.

<span class="mw-page-title-main">Aluminium fluoride</span> Chemical compound

Aluminium fluoride is an inorganic compound with the formula AlF3. It forms hydrates AlF3·xH2O. Anhydrous AlF3 and its hydrates are all colorless solids. Anhydrous AlF3 is used in the production of aluminium metal. Several occur as minerals.

Perfluoroethers are a class of organofluorine compound containing one or more ether functional group. In general these compounds are structurally analogous to the related hydrocarbon ethers, except for the distinctive properties of fluorocarbons.

<span class="mw-page-title-main">Hexafluoropropylene oxide</span> Chemical compound

Hexafluoropropylene oxide (HFPO) is an intermediate used in industrial organofluorine chemistry; specifically it is a monomer for fluoropolymers. This colourless gas is the epoxide of hexafluoropropylene, which is a fluorinated analog of propylene oxide, HFPO is produced by DuPont and 3M and as a precursor to the lubricant Krytox and related materials. It is generated by oxidation of perfluoropropylene, e.g. with oxygen as well as other oxidants.

Drinking water quality in the United States is generally safe. In 2016, over 90 percent of the nation's community water systems were in compliance with all published U.S. Environmental Protection Agency standards. Over 286 million Americans get their tap water from a community water system. Eight percent of the community water systems—large municipal water systems—provide water to 82 percent of the US population. The Safe Drinking Water Act requires the US EPA to set standards for drinking water quality in public water systems. Enforcement of the standards is mostly carried out by state health agencies. States may set standards that are more stringent than the federal standards.

Perfluorononanoic acid, or PFNA, is a synthetic perfluorinated carboxylic acid and fluorosurfactant that is also an environmental contaminant found in people and wildlife along with PFOS and PFOA.

<span class="mw-page-title-main">Per- and polyfluoroalkyl substances</span> Class of perfluorinated chemical compounds

Per- and polyfluoroalkyl substances (PFAS or PFASs) are a group of synthetic organofluorine chemical compounds that have multiple fluorine atoms attached to an alkyl chain. An early definition, from 2011, required that they contain at least one perfluoroalkyl moiety, –CnF2n+1–. Beginning in 2021, the Organisation for Economic Co-operation and Development (OECD) expanded their terminology, stating that "PFASs are defined as fluorinated substances that contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e., with a few noted exceptions, any chemical with at least a perfluorinated methyl group (–CF3) or a perfluorinated methylene group (–CF2–) is a PFAS."

<span class="mw-page-title-main">Perfluorobutanesulfonic acid</span> Chemical compound

Perfluorobutanesulfonic acid (PFBS) is a PFAS chemical compound having a four-carbon fluorocarbon chain and a sulfonic acid functional group. It is stable and unreactive because of the strength of carbon–fluorine bonds. It can occur in the form of a colorless liquid or a corrosive solid. Its conjugate base is perfluorobutanesulfonate which functions as the hydrophobe in fluorosurfactants.

<span class="mw-page-title-main">Perfluorinated compound</span>

A perfluorinated compound (PFC) or perfluoro compound is an organofluorine compound lacking C-H bonds. Many perfluorinated compounds have properties that are quite different from their C-H containing analogues. Common functional groups in PFCs are OH, CO2H, chlorine, O, and SO3H. Electrofluorination is the predominant method for their production. Due to their chemical stability, some of these perfluorinated compounds bioaccumulate.

<span class="mw-page-title-main">Perfluoroalkoxy alkane</span> Family of polymers

Perfluoroalkoxy alkanes (PFA) are fluoropolymers. They are copolymers of tetrafluoroethylene (C2F4) and perfluoroethers (C2F3ORf, where Rf is a perfluorinated group such as trifluoromethyl (CF3)). The properties of these polymers are similar to those of polytetrafluoroethylene (PTFE). Compared to PTFE, PFA has better anti-stick properties and higher chemical resistance, at the expense of lesser scratch resistance.

GenX is a Chemours trademark name for a synthetic, short-chain organofluorine chemical compound, the ammonium salt of hexafluoropropylene oxide dimer acid (HFPO-DA). It can also be used more informally to refer to the group of related fluorochemicals that are used to produce GenX. DuPont began the commercial development of GenX in 2009 as a replacement for perfluorooctanoic acid.

This timeline of events related to per- and polyfluoroalkyl substances (PFASs) includes events related to the discovery, development, manufacture, marketing, uses, concerns, litigation, regulation, and legislation, involving the human-made PFASs. The timeline focuses on some perfluorinated compounds, particularly perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) and on the companies that manufactured and marketed them, mainly DuPont and 3M. An example of PFAS is the fluorinated polymer polytetrafluoroethylene (PTFE), which has been produced and marketed by DuPont under its trademark Teflon. GenX chemicals and perfluorobutanesulfonic acid (PFBS) are organofluorine chemicals used as a replacement for PFOA and PFOS.

<span class="mw-page-title-main">Perfluorohexanesulfonic acid</span> Chemical compound

Perfluorohexanesulfonic acid (PFHxS) is a synthetic chemical compound. It is one of many compounds collectively known as per- and polyfluoroalkyl substances (PFASs). It is an anionic fluorosurfactant and a persistent organic pollutant with bioaccumulative properties. Although the use of products containing PFHxS and other PFASs have been banned or are being phased out in many jurisdictions, it remains ubiquitous in many environments and within the general population, and is one of the most commonly detected PFASs.

<span class="mw-page-title-main">Fluoroether E-1</span> Chemical compound

Fluoroether E-1 (known chemically as heptafluoropropyl 1,2,2,2-tetrafluoroethyl ether, is a chemical compound that is among the class of per- and polyfluoroalkyl substances. This synthetic perfluorinated petrochemical is also described as a multi-ether perfluoroalkyl ether carboxylic acid.

References

  1. Drinking Water Health Advisory epa.gov
  2. "Gen-x/PFAS Information". Brunswick County, North Carolina. Retrieved 11 December 2021.
  3. "Justification for the selection of a substance for CoRAP inclusion" . Retrieved 23 July 2017.
  4. Beekman, M.; et al. (2016-12-12). "Evaluation of substances used in the GenX technology by Chemours, Dordrecht". National Institute for Public Health and the Environment (RIVM, The Netherlands). Retrieved 2017-07-23.
  5. "GenX Chemical in Drinking Water: Side Effects and Health Risks of GenX". 13 November 2023.
  6. "What is GenX? | Get the Facts".
  7. Matheny, Keith (3 August 2020). "Michigan's drinking water standards for these chemicals now among toughest in nation". Detroit Free Press. Archived from the original on 31 January 2022. Retrieved 31 March 2022.
  8. "New state drinking water standards pave way for expansion of Michigan's PFAS clean-up efforts". Michigan.gov. 3 August 2020. Archived from the original on 3 January 2022. Retrieved 5 April 2022.
  9. "EPA announces drinking water standards for six individual PFAS "forever chemicals"".
  10. "EPA Proposes PFAS National Primary Drinking Water Rule -- hearing (5/4), invites comments (By 5/30) - EconSpark".