John Fowler (11 July 1826 – 4 December 1864) was an English agricultural engineer who was a pioneer in the use of steam engines for ploughing and digging drainage channels. His inventions significantly reduced the cost of ploughing farmland, and also enabled the drainage of previously uncultivated land in many parts of the world.[1]
Fowler was born in Melksham, Wiltshire. His father, John Fowler senior was a wealthy Quaker merchant, who had married Rebecca Hull, and together they had three daughters and five sons, of whom Fowler was the third son. When he left school Fowler followed his father's wishes and began working for a local corn merchant, but when he came of age in 1847 he turned his back on the corn business and joined the engineering firm of Gilkes Wilson and Company of Middlesbrough. Amongst other things, the company was involved in building steam locomotives and colliery winding engines. The company built a number of locomotives for the Stockton and Darlington Railway.[1]
Change of career
Fowler might have remained with the Middlesbrough firm and made his reputation there, had it not been for a chance visit to Ireland in 1849, probably on business. This was at the time of the Great Famine, and Irish agriculture depended on the potato crop whilst much of the land was uncultivated due to poor drainage. This affected Fowler and he was convinced that there must be a way of bringing more land into production. The normal way to drain agricultural land was to use a mole plough to dig a subterranean drainage channel. The mole plough has a vertical blade with a cylindrical "mole" attached to the bottom. The mole is pointed at the front end, and as it moves through the soil, it leaves a horizontal channel into which porous drainage pipes can be laid. However this required considerable tractive power, so that the size of the plough was limited by the strength of the teams of horses that pulled it. Fowler returned to England and developed a horse-powered ploughing engine that would dig drainage channels.
First drainage plough
Fowler's ploughing engine dragged itself across the field on rollers, pulling the mole plough as it went. The engine was driven by a team of horses that walked round a capstan, winding in a rope which was passed through a pulley securely anchored at the far end of the field. The mole would have a string of drainage pipes attached at the rear end and these would be dragged through the channel created by the mole. On completing each length of drains, the engine would be turned, the rope would be let out and the pulley repositioned ready for the next length. Fowler had trouble with the capstan gears and with the rope slipping on the capstan,[1] but was able to demonstrate his engine at a meeting of the Royal Agricultural Society of England at Exeter in 1850. He was able to lay a drain at a depth of 2ft 6in (0.76m) in heavy clay. His invention was awarded a silver medal and was reported as "altogether the most important feature of the exhibition."[2]
Second drainage plough
Fowler then decided to change his design so that the horse engine remained stationary at the corner of the field. The team of horses drove a vertical winch around which a rope was wound. The rope would pass along the edge of the field to a securely anchored pulley and would then pass at right angles across the field to the mole plough. As the horses drove the winch, the rope would drag the mole plough across the field, digging a drainage channel and inserting a length of drainage pipes. When each length had been completed, the pulley would be moved to a new position, the rope would be let out and the plough would be taken to the far side of the field, ready to start the next channel. The design was a vast improvement on the previous one, in that the horsepower was not being expended in dragging the machine across the field, only the plough. Fowler demonstrated his new drainage plough at the Great Exhibition in 1851[3] and at the Royal Agricultural Society of England meeting at Gloucester in 1853, where he was awarded another silver medal. He was able to lay drains to a depth of 3ft 6in (1.07m).[1]
First steam-driven drainage plough
In his early career, Fowler had worked with steam engines and the logical progression was to apply this method of power to his drainage plough. This he did in 1852 when he designed a steam engine with a winch mounted out in front of the smoke box and a rope running from it, round a pulley anchored at the far side of the field and back to the engine. The engine pulled itself across the field, dragging the mole plough behind it. The design was therefore similar to his first design for the horse-powered plough. The experiment was a failure because the steam engine proved to be too heavy to move easily over soft ground. However, in the same year, on 21 October, Fowler was awarded patent number 480 for "Improvements in Machinery for draining land", believed to be one of the first patents for the use of steam power in agriculture.[3]
Second steam-driven drainage plough
Following the failure of his first steam-driven plough, Fowler reverted to the design used for his second horse-driven plough. His new design consisted of a steam engine placed in a corner of the field driving a winch. A rope led from the winch along the side of the field, around a securely anchored pulley and across the field to the mole plough. As the winch drew in the rope the mole plough was drawn across the field digging a drainage channel as it went. The engine also had a second winch with a rope passing round the same anchored pulley and then passing across the field and around a second pulley and back to the plough. This second rope would be used to drag the plough back to its starting point after completing a drainage line. Both pulleys would then be re-anchored at both ends of the next channel to be dug and the ploughing process would be repeated. The steam plough was demonstrated at the Royal Agricultural Society of England meeting at Lincoln in 1854.[1]
Steam-driven plough
It seemed an obvious progression to use Fowler's latest steam-driven plough for normal ploughing, rather than just drainage channels. However normal ploughing was much lighter work that could be achieved perfectly well by a team of horses and in comparison the steam-driven plough was rather cumbersome. One way of improving the plough's efficiency would be to design a plough that could plough in either direction without having to be turned round. Fowler achieved this by designing a frame for the plough that had two ploughs attached as a kind of see-saw. One of the two plough blades would be swung down to make contact with the soil, depending on the direction the plough was to travel. At the end of each furrow the anchored pulleys would be moved slightly ready for the next furrow.
The firm of Ransome and Sims built the new engine at its Orwell works at Ipswich, and on 10 April 1856 a trial was carried out at Nacton in which 1 acre was ploughed in an hour. Despite the fact that the engine and plough coped well with the task, the effort of re-positioning the pulleys at either end of the field was too time-consuming.
Fowler got round the above problem by using a weighted cart with a pulley mounted beneath the frame. The cart had disc wheels that dug into the ground so that the cart acted as an anchor for the pulley. Two carts would be placed at opposite ends of the furrow so as to pull the plough in either direction, and after completing a furrow, the carts would be winched to the position for the next furrow.
Fowler's modified ploughing system was demonstrated at the Royal Agricultural Society of England meeting at Chelmsford in 1856. and at the following meeting at Salisbury in 1857. In 1854 the R.A.S.E. had offered a £200 prize for the best system of mechanical cultivation, and this had since been raised to £500. At Chelmsford, Fowler's ploughing system was pitted against a rival ploughing system designed by John Smith of Woolston. Smith's design did not fulfil all of the judges' conditions and it was disqualified. Fowler's system worked very well, but the estimated cost of his work was 7s 2½d per acre as against 7s for horse ploughing. The judges therefore decided not to award the prize, a bitter disappointment for Fowler who thought that the superior speed of his system over horse ploughing should have been taken into account.[1]
A similar trial was held at the R.A.S.E. meeting at Salisbury in 1857, but again the prize was withheld. However, Fowler did receive £200 awarded by the Royal Highland and Agricultural Society of Scotland, after a trial at Stirling that same year, despite the judges agreeing that the sole entrant had not exactly fulfilled the conditions the efforts were impressive.[4] Fowler returned to contest the R.A.S.E. ploughing trial at Chester in 1858. He was opposed by a number of competitors but was successful in being awarded the £500 prize.[1]
Marriage
On 30 July 1857 Fowler married his third cousin (once removed), Elizabeth Lucy (1833–1881), fifth child of Joseph Pease, MP for South Durham. Joseph Pease was a wealthy Quaker from Darlington who had supported his father Edward Pease's proposal for the Stockton and Darlington Railway. Fowler had become more closely acquainted with the Pease family when he was working at Middlesbrough. Fowler and his wife settled at Havering in Essex and had five children: Emma Mary Fowler (4 May 1858 – 13 Dec 1939), Edith Rebecca Fowler (15 Oct 1859 – 6 Dec 1895), Laura Elizabeth Fowler (16 Mar 1861 – 11 Oct 1941), John Ernest Fowler (3 Jan 1863 – 21 Apr 1884), Lucy Pease Fowler (25 Apr 1864 – 22 Aug 1909).
Double-engine ploughing
In 1856 Fowler filed a patent relating to a method of ploughing using two self-moving engines, placed at opposite ends of the field and each using a winch to draw a plough backwards and forwards between them. This system did away with the need for pulleys and anchors, but was more expensive in that it required two engines, only one of which was working at a time. It is believed that Fowler persevered with his single-engine ploughing system because it was cheaper and he saw it as more affordable for average farmer. Eventually the double-engine ploughing method superseded the single-engine system that had won the prize at Chester. Because of its expense it was normally operated by contractors.
Fowler first showed his double-engine system of ploughing at the R.A.S.E. ploughing trial at Worcester in 1863. He competed in 1864 in Newcastle upon Tyne competing against a ploughing system designed by his great rivals, the Howard brothers of Bedford. Fowler's system carried off every prize.
Fowler Winching Ploughing Engines
Fowler ploughing engine
Fowler ploughing engine
Winch and steering detail of Fowler ploughing engine
Fowler ploughing engine
Fowler ploughing engine
Fowler ploughing engine
Later career
Steam traction engine at Mt Warrenheip near BallaratFowler self-contained motor plough
Between 1850 and 1864 Fowler took out in his own name and in partnership with other persons thirty-two patents for ploughs and ploughing apparatus, reaping machines, seed drills, traction engines, slide valves, the laying of electric telegraph cables, and the making of bricks and tiles.
By 1858 Fowler had forty sets of ploughing tackle in use, and by 1861 he had one hundred sets working. From 1860 the manufacture of the ploughing machinery was carried out by the firm of Kitson and Hewitson of Leeds. Fowler inspired many industrialists, such as Julius Kemna (whom he cooperated with),[5] to build (and later improve) his revolutionary steam-based machines.
John Fowler and Company
In 1862 Fowler formed a partnership with William Watson Hewitson of the above firm and founded Hewitson and Fowler based at Hunslet. A year later Hewitson died and the firm became John Fowler and Company. Fowler's ploughing sets were sold all over the world and were responsible for bringing land into production that was previously unable to be cultivated.[1]
Retirement
Fowler had worked so hard in developing his ideas that he had undermined his health. He was advised to take more rest and so he retired to Ackworth in Yorkshire, to recuperate. He was persuaded to take up hunting as a way of getting exercise and whilst out with the hunt he had a fall and sustained a compound fracture of his arm. Whilst recovering from this mishap, he developed tetanus and died on 4 December 1864, at his home in Ackworth. He died only months after his great triumph at the Newcastle ploughing trial, at age 38.
His brothers Robert, William and Barnard had joined him in the business he had founded and they continued to run the firm after his death. Fowler's method of ploughing continued to be used until well into the twentieth century when the internal combustion engine allowed the development of light but powerful tractors that could draw a plough behind them.[1]
A monument to John Fowler's invention of the steam plough was placed on his father-in-law's Pierremont estate in 1856, but was moved in 1870 to South Park, Darlington. The plinth may still be seen there, but the plough that it supported disappeared in 1970.
Related Research Articles
An anchor is a device, normally made of metal, used to secure a vessel to the bed of a body of water to prevent the craft from drifting due to wind or current. The word derives from Latin ancoracode: lat promoted to code: la , which itself comes from the Greek ἄγκυραcode: ell promoted to code: el .
A plough or plow is a farm tool for loosening or turning the soil before sowing seed or planting. Ploughs were traditionally drawn by oxen and horses but in modern farms are drawn by tractors. A plough may have a wooden, iron or steel frame, with a blade attached to cut and loosen the soil. It has been fundamental to farming for most of history. The earliest ploughs had no wheels; such a plough was known to the Romans as an aratrum. Celtic peoples first came to use wheeled ploughs in the Roman era.
Continuous track is a system of vehicle propulsion used in tracked vehicles, running on a continuous band of treads or track plates driven by two or more wheels. The large surface area of the tracks distributes the weight of the vehicle better than steel or rubber tires on an equivalent vehicle, enabling continuous tracked vehicles to traverse soft ground with less likelihood of becoming stuck due to sinking.
Wakeskating is a water sport and an adaptation of wakeboarding that employs a similar design of board manufactured from maple or fibreglass. Unlike wakeboarding, the rider is not bound to the board in any way, similar to the skateboard, from which the name derives.
A winch is a mechanical device that is used to pull in or let out or otherwise adjust the tension of a rope or wire rope.
A traction engine is a steam-powered tractor used to move heavy loads on roads, plough ground or to provide power at a chosen location. The name derives from the Latin tractus, meaning 'drawn', since the prime function of any traction engine is to draw a load behind it. They are sometimes called road locomotives to distinguish them from railway locomotives – that is, steam engines that run on rails.
Ridge and furrow is an archaeological pattern of ridges and troughs created by a system of ploughing used in Europe during the Middle Ages, typical of the open-field system. It is also known as rigand furrow, mostly in the North East of England and in Scotland.
A capstan is a vertical-axled rotating machine developed for use on sailing ships to multiply the pulling force of seamen when hauling ropes, cables, and hawsers. The principle is similar to that of the windlass, which has a horizontal axle.
Aveling and Porter was a British agricultural engine and steamroller manufacturer. Thomas Aveling and Richard Thomas Porter entered into partnership in 1862, and developed a steam engine three years later in 1865. By the early 1900s, the company had become the largest manufacturer of steamrollers in the world. The company used a rampant horse as its logo derived from the White Horse of Kent.
A steam donkey or donkey engine is a steam-powered winch once widely used in logging, mining, maritime, and other industrial applications.
A steam tractor is a vehicle powered by a steam engine which is used for pulling.
The National Museum of Rural Life, previously known as the Museum of Scottish Country Life, is based at Wester Kittochside farm, lying between East Kilbride in South Lanarkshire and Carmunnock in Glasgow. It is run by National Museums Scotland.
Charles Burrell & Sons were builders of steam traction engines, agricultural machinery, steam lorries and steam tram engines. The company were based in Thetford, Norfolk and operated from the St Nicholas works on Minstergate and St Nicholas Street, some of which survives today.
A Headland, in agriculture, is the area at each end of a planted field. In some areas of the United States, this area is known as the Turnrow. It is used for turning around with farm implements during field operations and is the first area to be harvested to minimize crop damage. The rows run perpendicular to the lay of the field and are usually two, three or four times the width of the implement used for planting the field.
The stump-jump plough, also known as stump-jumping plough, is a kind of plough invented in South Australia in the late 19th century by Richard Bowyer Smith and Clarence Herbert Smith to solve the particular problem of preparing mallee lands for cultivation.
A mine railway, sometimes pit railway, is a railway constructed to carry materials and workers in and out of a mine. Materials transported typically include ore, coal and overburden. It is little remembered, but the mix of heavy and bulky materials which had to be hauled into and out of mines gave rise to the first several generations of railways, at first made of wooden rails, but eventually adding protective iron, steam locomotion by fixed engines and the earliest commercial steam locomotives, all in and around the works around mines.
James & Fred Howard of Britannia Ironworks, Bedford, later known simply as Howards, were one of the largest English makers of agricultural equipment, steam traction engines, and light railway equipment. At The Great Exhibition of 1851 they exhibited a range of horse-drawn implements. After World War I, Howards became part of AGE, Agricultural & General Engineers, along with many of the other British makers of similar machinery.
A living van is a portable caravan, used by the itinerant crew of a traction engine.
The John Fowler 7nhp Steam Road Locomotive is a heritage-listed former steam road locomotive with nominal power of 5.2 kilowatts (7 hp) and now exhibited at 9 Amaroo Drive, Wellington, in the Dubbo Regional Council local government area of New South Wales, Australia. It was designed and built by John Fowler & Co. (Leeds) Ltd in 1912. The property is owned by the Dubbo Regional Council and it was added to the New South Wales State Heritage Register on 18 November 2011.
References
1 2 3 4 5 6 7 8 9 Rolt, L.T.C., "Great Engineers", 1962, G. Bell and Sons Ltd, ISBN
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
