The rifle is designed to fire semi-automatically, although it has the option to fire in full auto in case of emergencies.[7]
History
Early experience in influencing the SPR was from American forces deployed in Somalia when they used different optics, ammo, triggers, free float hand guards and rail systems for their rifles.[8]
The SPR concept was originally proposed by Mark Westrom, president of ArmaLite, while working at Rock Island Arsenal in 2000.[7] It's design group included John Noveske and Steve Holland.[9] The program was an outgrowth of the desire by both US Army and Navy special operations forces for a rifle with greater effective range than an M4 carbine but shorter than an SR-25. The SPR program appears to have grown out of both the SOPMOD Block I program, and the U.S. Navy SEALsRecon Rifle, a 16" flat-topped M16 carbine. Early models included the SPR, SPR/A, and SPR/B. The Naval Surface Warfare Center, Crane Division expanded on the Recon Rifle.[7]
Initial tests were conducted in October 2000 in order to determine any weaknesses with the first SPR rifles manufactured.[2] From 2000 to 2001, all errors were corrected for the second production of SPRs.[2] The first SPRs were issued in 2002.[4]
The Mk 12 Mod 0 was only used by the US Army Special Forces while the Mk 12 Mod 1 was used by the Rangers, Navy SEALs and Special Tactical Teams.[2] The USMC also used the Mk 12 Mod 1 towards the end of the war in Iraq and extensively in Afghanistan.[10][11] They were mostly deployed as DMRs.[4] The Mk 12 Mod H was used primarily by Army SOF and SMUs, and featured a retrofit upper of the Mod 0 with PRI Gen3 round hanguards and a shorter RECCE rail to replace the original Swan Sleeve, reducing weight, and either Douglas or Noveske barrels made with the SPR profile in a rifle length gas system. [9]
In mid-2011, SOCOM began removing the Mk 12 SPR from their inventory and replacing it with the marksman version of the SCAR Mk 17, with the Mk12 being completely replaced by 2017.[12]
Design
Upper receiver
The majority of the SPR upper receivers were initially supplied by Colt, with others being produced by Diemaco (now Colt Canada).[2] Colt had been outsourcing parts of its production to Diemaco for several years, then purchased Diemaco in February 2005. It is unclear whether the upper receivers for the later SPRs came solely from ArmaLite, or were a mix of receivers from ArmaLite and Colt/Diemaco.
All of these upper receivers are flat-topped, but have been seen with either the old-style teardrop forward assist or the newer round style.[7]
Lower receiver
When the SPR program was still just an upper receiver assembly (and not a complete rifle), Crane assembled all of its prototypes using either M16A1 or M4A1 lower receivers, because the full auto trigger group in these lower receivers provided a consistent pull while the more common 3-round burst trigger groups didn't.
While a number of trigger options were tried in the end, the Knight's Armament Company (KAC) 2-stage trigger was finally decided upon as the standard.[7] Most of the obsolete M16A1 lower receivers were turned into NSWC Crane for disposal.[2]
Barrel
An 18-inch (457mm) (MOD 0/1) or 16-inch (406mm) (MOD H) threaded-muzzle match-grade free floating stainless steel heavy barrel with a 1:7 (178mm) rifling twist ratio is standard for the SPR.[11][3][13]
The barrels are manufactured by Douglas Barrels with a unique contour that reduced weight but maintained rigidity for accuracy.[14] An OPS Inc. muzzle brake and collar (to align the OPS Inc. 12th Model Suppressor) is installed with the barrel.[14]
These barrels were designed to take advantage of the new Mk 262 cartridge, which uses a 77-grain (5 g) bullet.
Some early Mod H's were made using Noveske barrels but eventually switched back to the Douglas barrels commonly shared across the other variants. [9]
Stock
SPRs have been seen with M16A1 or M16A2 fixed buttstocks, telescoping M4 buttstocks, and the Crane Enhanced telescoping buttstock.[2] The rifles are compatible with any type of stock system developed for the M16.[7]
Handguards
In all cases a free-floating forearm is used, which does not touch the barrel directly. This increases the accuracy of the weapon by removing vibration and pressure exerted on the barrel by the rest of the gun. The first SPRs used PRI Gen I or Gen II carbon-fiber free-float tubes. The SPR/A, SPR/B, and MK 12 MOD 1 all use the Knights Armament Company M4 Match Free-Floating Rail Adapter System, KAC part number 99167.[2]
The Mk 12 MOD 0/H uses PRI Gen III free-float tubes.[2] The Gen I and Gen II Freefloat Forearms are combined with the Atlantic Research Marketing Systems #38 SPR MOD Sleeve, while the Gen III Freefloat Forearm, due to its larger barrel nut, only works with the ARMS #38 SPR PEQ-2-3.
Accessories
The original SPR used an early PRI flip-up front sight with an elevation dial, which has since been discontinued. The Mk 12 MOD 0/H uses the current PRI flip-up front sight. The SPR/A, SPR/B, and Mk 12 MOD 1 use the KAC rail forend flip-up front sight, KAC part number 99051. The SPR and Mk 12 MOD 0/H use the ARMS #40 flip up rear sight. The rest of the models use the KAC 600 meter flip up rear, KAC part number 98474.
Due to the relative modularity of the system, optics (as well as almost everything else) can be mounted according to the operator's wishes. However, SPRs are most often seen with a 3.5–10×40mm Leupold LR M3 (SPR/A), a 2.5–8×36mm TS-30 (SPR/B), or a 3–9×36mm TS-30 A2 (Mk 12 MOD 0/1) Mid Range/Tactical Illuminated Reticle Dayscope. Night vision devices can also be attached. These scopes usually come with flip open dust covers and a honeycomb anti-glare anti-reflection device. Given Nightforce Optics' NAVSPECWAR contract, it is believed that many NAVSPECWAR issued SPRs will use the Nightforce 2.5-10x42 NXS scope.[15]
A long accessory rail, called a Swan Sleeve (ARMS SPR MOD or ARMS #38 SPR PEQ-2-3), manufactured by ARMS, is installed, running the length of the rifle.[2] The SPR/A and SPR/B both used the KAC M4 Match FF RAS, KAC part number 99167. Two ARMS #22 Throwlever 30mm steel rings are used to mount the dayscope. The SPR/A, SPR/B, and Mk 12 MOD 1 use ARMS #22 high rings, while due to the increased height from the SWAN Sleeve, the SPR and Mk 12 MOD 0/H use ARMS #22 medium rings. An under-the-handguard ARMS #32 Throwlever mount is used to mount the Harris bipod (the ARMS #42 Throwlever mount is used to mount the Versa-Pod); this features a quick release action. Nightforce Ultralite 1.375" rings were also alternate issued rings, primarily with Nightforce riflescopes from Crane.
Originally the relatively expensive Parker-Hale swivel bipods were used, but were taken off the system after the initial SPR.[citation needed] Currently, a Harris swivel model bipod is typically used with the SPR, and is sometimes seen with a KMW Pod-Loc tension adjustment device.[11] As mentioned above, the bipod is mounted via an ARMS #32 throwlever device attached to the bottom rail of the rifle's forearm.[2] The ARMS mount is used on both the MOD 0 and MOD 1.[2]
The OPS Inc. 12th Model SPR Muzzle Brake Suppressor threads directly onto the OPS Inc. muzzle brake and uses the collar to stay centered for Mk 12 MOD 0/1 models.[2] The first 100 suppressors were made in RD Systems in South Beloit, Illinois.[16]
In 2014, Ops, Inc stopped manufacturing this model of suppressors. The equivalent product is currently manufactured by Allen Engineering Co as the AEM5. The AEM5 is essentially the same suppressor design and actually built by the same individual, Ron Allen, who previously fabricated the 12th model suppressor for Ops, Inc.[6] Other models of this suppressor are also produced that look the same from the outside, but are fundamentally different suppressors.[17]
The SPR is not used to fire standard issue 5.56mm M855A1, M193 ball, or M856 tracer ammunition.[11] Due to the limits in terminal performance and relatively poor accuracy of the 62-grain (4 g) M855 ball, the Mk 262 Open Tip Match (OTM) round was developed and manufactured by Black Hills Ammunition as a more accurate round for the SPR. The first production batches were designated Mk 262 MOD 0 and used a Sierra MatchKing 77-grain (5 g) Hollow Point Boat Tail bullet without a cannelure (crimping groove).[18]
Black Hills then approached the Nosler bullet manufacturing company, who made a similar 77gr (5.0g) OTM bullet, and Nosler agreed to supply cannelured bullets to Black Hills.
The newer load was designated Mk 262 MOD 1.[19] Recently, Sierra added a minimal cannelure to its bullet, and this has since replaced the Nosler bullet in the current versions of Mk 262 MOD 1. In late 2014, Sierra introduced a tipped version of this bullet which adds a polymer tip to improve ballistics.
This new bullet was found exclusively in an upgraded version of the Black Hills Ammo MK262 MOD 1 loading, but this bullet has been released by Sierra to reloaders prior to the end of 2014. The Sierra part number for this bullet is 7177.
Clones
The Mk 12 SPR has been manufactured by various firearms companies as clone rifles. Centurion Arms manufactures clones of the Mk 12.[20] Troy Industries made a retro Mk 12 for sale in 2017.[21]
Precision Reflex Inc unveiled a Mk 12 rifle chambered in .308 Winchester in SHOT SHOW 24 in January 2024.[22]
US Army SF takes aim with his desert camouflage-painted SPR. An Insight Technologies AN/PEQ-2A Target Pointer/Illuminator Aiming Light (TIPAL) is mounted on the right of the rifle's handguards. A standard M4 telescoping stock is mounted.
An SPR, not a Mk 12 Mod 0. Note the early PRI freefloat tube of constant diameter. This SPR has a Versa-pod bipod and has a fixed stock. The upper receiver has a teardrop-shaped forward assist.
A U.S sniper looks through the scope of a Mk 12 Mod 1 Special Purpose Rifle.
Mk 12 Mod 1 rifle in USMC service in Afghanistan, 2010.
The M16 rifle is a family of military rifles adapted from the ArmaLite AR-15 rifle for the United States military. The original M16 rifle was a 5.56×45mm automatic rifle with a 20-round magazine.
The IMI Galil is a family of Israeli-made automatic rifles chambered for the 5.56×45mm NATO and 7.62×51mm NATO cartridges. Originally designed by Yisrael Galili and Yakov Lior in the late 1960s, the Galil was first produced by the state-owned Israel Military Industries and is now exported by the privatized Israel Weapon Industries.
The M4 carbine is a 5.56×45mm NATO, gas-operated, magazine-fed carbine developed in the United States during the 1980s. It is a shortened version of the M16A2 assault rifle.
The Colt Canada C7 and C8 are a Canadian family of service rifles, manufactured by Colt Canada, having similar design and function to the Colt M16A3.
A designated marksman (DM), squad advanced marksman (AD) or squad designated marksman (SDM) is a military marksman role in an infantry squad. The term sniper was used in Soviet doctrine although the soldiers using the Dragunov SVD were the first to use a specifically designed designated marksman rifle. The analogous role in the Israel Defense Forces is sharpshooter.
The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features that improve performance in very cold conditions without impairing operation in less extreme conditions.
The SEAL Recon Rifle is an American designated marksman rifle and assault rifle used by the United States Navy SEALs. Essentially a heavily modified M16 rifle, it is intended to provide SEAL snipers and designated marksmen with a versatile, accurate, lightweight, and relatively compact weapon chambered in 5.56×45mm NATO.
The Squad Advanced Marksman Rifle (SAM-R) is a semi-automatic designated marksman rifle developed and used by the United States Marine Corps. It gave users the capability to provide fire in support of a rifle squad, providing precision fire in support of an assault, and aid in observation and adjusting of supporting arms.
The United States Marine Corps Designated Marksman Rifle is a semi-automatic, gas-operated rifle chambered for the 7.62×51mm NATO cartridge. It is a modified version of the M14 rifle formerly used by the United States Marine Corps. The USMC Precision Weapons Section at Marine Corps Base Quantico built all DMRs.
The Close Quarter Battle Receiver (CQBR) is a replacement upper receiver for the M4A1 Carbine, developed by the US Navy.
The Squad Designated Marksman Rifle (SDM-R) is an American designated marksman rifle used by the United States Army. It is essentially a heavily modified M16 rifle designed to provide U.S. Army designated marksmen greater accuracy and firepower at longer ranges, increasing an infantry squad's effective range to up to 600 meters.
The Mk 14 Enhanced Battle Rifle (EBR) is an American military selective fire battle rifle, and a designated marksman rifle chambered for the 7.62×51mm NATO cartridge. It is a variant of the M14 battle rifle and was originally built for use with units of United States Special Operations Command, such as the United States Navy SEALs, Delta Force, and task specific Green Berets ODA teams/units.
A designated marksman rifle (DMR) is a modern scoped high-precision rifle used by infantry in the designated marksman (DM) role. It generally fills the engagement range gap between a service rifle and a dedicated sniper rifle, at around 300–600 metres (330–660 yd).
The SR-25 is a designated marksman rifle and semi-automatic sniper rifle designed by Eugene Stoner and manufactured by Knight's Armament Company.
The M110 Semi Automatic Sniper System is an American semi-automatic sniper rifle that is chambered for the 7.62×51mm NATO round. It is manufactured by Knight's Armament Company, developed from the Knight's Armament Company SR-25, and adopted by the U.S. military following the 2005 US Army Semi-Automatic Sniper Rifle competition.
The Colt Automatic Rifle or Colt Light Machine Gun is a 5.56 mm NATO, open-bolt, full-automatic-only firearm developed by Colt Defense. It is based on the M16A2/A4, and has a distinctive squared-off handguard, vertical grip, carrying handle and integrated bipod.
The FN Special Police Rifle is a bolt-action sniper rifle marketed by FNH USA, a subsidiary of the Belgian company FN Herstal.
The Marine Scout Sniper Rifle (MSSR) is a Philippine semi-automatic designated marksman rifle developed by the Philippine Marine Corps for their Marine Scout Snipers. Designed in the mid-1990s to replace severely-outdated battle rifles then used as marksman rifles, the MSSR is essentially an M16A1 that has been heavily modified and accurized to serve as a marksman rifle.
The Barrett M468 was a variant of the M4 Carbine, rechambered for a heavier and larger 6.8mm bullet for increased terminal performance. The designation of M468 stands for an M4 carbine chambered for the 6.8mm SPC cartridge. It was an attempt to create an optimal Special Operations close-to-medium range carbine for Close Quarter Battle (CQB). A 12-inch barreled micro-carbine and 16-inch barreled carbine version were created. Barrett ceased manufacturing the rifle in 2010.
The MK 13 rifle is made using the Accuracy International Chassis System (AICS) version 2.0 mated to a long action Remington 700 receiver. The AICS 2.0 folding stock reduces the rifle's overall length by 210 mm (8.3 in) when folded and adds 0.2 kg (0.44 lb) to the rifle's total weight. The rifle has a cheekpiece design that adjusts sideways and for height for optimal cheek position when using night vision equipment or telescopic sights with large objective lenses. There is also a quick-adjust cheek-piece option that has a spring-loaded cheek-piece in conjunction with a quick-adjust butt plate. The side panels are made from a high-strength polymer and are available in the colors olive drab, dark earth or black. Sling attachment points are mounted on each side of the rifle, so it can be carried flat against the back and used comfortably by left- and right-handed users. A front attachment point is situated below the fore-end and can be used to anchor a target-style sling or replaced by an adapter for a Harris bipod.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
