Peugeot 605

Last updated

Peugeot 605
Peugeot 605 red vr.jpg
Peugeot 605 post facelift
Overview
Manufacturer Peugeot
Production19891999
19951999 (facelift)
Assembly Sochaux, France
Vesoul, France
Designer Pininfarina
Body and chassis
Class Executive car (E)
Body style 4-door saloon
Layout FF layout
Related Citroën XM [1]
Powertrain
Engine
Dimensions
Wheelbase 2,799 mm (110.2 in)
Length4,763 mm (187.5 in)
Width1,798 mm (70.8 in)
Height1,419 mm (55.9 in)
Curb weight 1,500 kg (3,307 lb)
Chronology
Predecessor Peugeot 604
Talbot Tagora
Successor Peugeot 607

The Peugeot 605 is an executive car produced by the French manufacturer Peugeot between 1989 and 1999, with a facelift in 1995.

Contents

History

Peugeot 605 2.0 SLi 1992 (15729169972).jpg
Peugeot 605 pre-facelift
Peugeot 605 SV 3.0 (2).jpg
Peugeot 605 pre-facelift (rear)
Peugeot 605 2.0 SRi 1995 (15237453109).jpg
Peugeot 605 post facelift
Peugeot 605 red hr.jpg
Peugeot 605 post facelift (rear)

The 605 was a saloon built on the same platform as the Citroën XM and was the successor to the critically well received, but slow selling, Peugeot 604, which went out of production four years earlier. [2] The popular Peugeot 505 model was thus phased out in the end of the 1980s and beginning of the 1990s in favour of two cars, the large family car 405 and the executive car 605.

Peugeot kept the estate version of the 505 in production until 1992, and had planned to replace it with an estate version of the 605, but this was eventually abandoned.

The car was launched in July 1989 in left-hand drive form; a right-hand version was launched onto the British market during the first half of 1990. At the time of the original launch, only petrol engines were available.

In April 1990, the turbodiesel followed, and the naturally aspirated diesel was added in autumn 1990. [3]

High equipment levels, a luxurious interior, a smooth ride, and exceptional handling were strong points for the 605. But Peugeot had always struggled to succeed with large cars outside France and the 605 was no different. It was too similar in design and appearance to the smaller Peugeot 405 to command a price premium, while its dashboard also drew criticism for its uninspired design.

PSA Peugeot Citroën, like Vauxhall/Opel, has not been able to address the "luxury brand" issue effectively, the automobile market seeming to reward segmentation by brands from one factory, like Lexus/Toyota, Acura/Honda, and Audi/Volkswagen.

Also like the XM, the 605 initially suffered from quality issues that resulted in numerous breakdowns or malfunctions (particularly with the ambitious electrics). [4] An extensive recall operation took place at great cost, in which most of the engine room wiring and exhaust system (as well as numerous other parts) were exchanged, but by then the damage to the car's reputation had been done.

In 1995, Peugeot tried to solve the problems by unveiling an extensively revamped 605 (known as the "Phase 2" model); it received a facelift which looked modern at its time, but also the interior was vastly improved by giving it more ergonomic controls and a refreshed look. The naturally aspirated diesel was discontinued at this time, as the new 406 was placed to supplant the lower specification 605s.

Performance and handling were improved as well, and many of the reliability issues were solved. Technological advances were made, most remarkably the side airbags, although sales remained low.

After the launch of the well received Peugeot 406 (that was larger than the 405 it replaced) in 1995, 605 sales dropped to near insignificant levels, and it was quietly dropped in September 1999. The 605's successor, the Peugeot 607, was launched in the autumn of 1999, and was slightly more successful on the domestic and export markets.

The end of 605 production in 1999 spelled the end of the "05" generation Peugeots in Europe after more than twenty years, this generation had started in 1977, with the 305.

A 605 served as a French presidential state car, being used to drive around president François Mitterrand. [5]

Design and styling

Its appearance resembles that of the Alfa Romeo 164, launched in 1987, and also styled by Pininfarina. [6] Despite the resemblance, the Peugeot did not use the Type Four platform; it rode the same platform as the Citroën XM. [7] As it closely followed Peugeot's design language of the time, the 605 bears a strong visual resemblance to the smaller Peugeot 405, this was generally considered to harm the 605 in the marketplace, as the car was not distinguished enough from its lower cost brethren. [8]

Engines

Peugeot 605 V6 12V (petrol engine) Peugeot 605 V6 engine.JPG
Peugeot 605 V6 12V (petrol engine)

Eight petrol engines were offered during the 605's lifetime:

As well as three diesel engines:

The carbureted four cylinder petrol engine and the normally aspirated diesel (which arrived for the model year of 1991), though reliable, were generally considered to be simply over matched by the car's weight. Even the turbodiesel came in for such criticism, with its hard working engine requiring as much fuel as its bigger competitors. [10]

The fuel injected inline four was better received though it was criticised for lacking low and mid range punch, whereas the powerful 170 PS (125 kW) V6 suffered from criticisms over poor fuel economy when combined with an automatic gearbox. In the beginning of 1993, all PRV V6 engines lost 12 cc of engine displacement, in order to fit in a lower taxation class in Switzerland.

The same issue affected the top of the range V6 24 version, in spite of its all new twenty four valve cylinder head, though a top speed of 235 km/h (146 mph) made poor fuel economy more acceptable to generally well heeled customers. The 2.1 turbo diesel was widely regarded [ according to whom? ] as a good powertrain, but was outclassed by the new direct injection engines introduced in 1988 by Audi.[ citation needed ]

A 2.0 litre (8 valve) turbocharged four cylinder petrol engine (150 PS) was added in 1991, and provided good performance, but proved unreliable. Later, a 2.5 turbodiesel (130 bhp) completed the diesel lineup. In 1997, the antiquated 3.0 litre V6 engines were replaced at long last by a unified V6 option: an all new 2.9 litre, 24 valve, 140 kW (190 PS; 188 bhp) V6.

Fiction

The Peugeot 605 is featured prominently in the car chase scenes of John Frankenheimer's film Ronin (1998). In the first chase, three Peugeot 605s are escorting a Citroën XM carrying a mysterious briefcase, where it comes under attack by mercenaries include the character played by Robert De Niro.

Sales

254,505 units have been produced. All came from Sochaux factory, except for 192 units manufactured in Vesoul (between 1991 and 1992). [11]

Related Research Articles

<span class="mw-page-title-main">V6 PRV engine</span> Reciprocating internal combustion engine

The V6 PRV engine is an automobile petrol V6 engine that was developed jointly by Peugeot, Renault and Volvo Cars – and sold from 1974 to 1998. It was gradually replaced after 1994 by another joint PSA-Renault design, known as the ES engine at PSA and the L engine at Renault. It was designed and manufactured by the company "Française de Mécanique" for PSA, Renault and Volvo.

<span class="mw-page-title-main">Peugeot 205</span> Motor vehicle

The Peugeot 205 is a supermini (B-segment) car produced by the French manufacturer Peugeot from 1983 to 1999.

<span class="mw-page-title-main">Peugeot 405</span> Motor vehicle

The Peugeot 405 is a large family car manufactured by the French automaker Peugeot from 1987 to 1997. Its production continued under license from outside Europe in Iran by Iran Khodro Company until 2020. It was voted European Car of the Year for 1988 by the largest number of votes in the history of the contest. About 2.5 million vehicles have been sold worldwide, both in left and right drive versions, as a saloon and estate. In early 2020, the 33-year production run of the Peugeot 405 was counted as the twentieth most long-lived single generation car in history."

<span class="mw-page-title-main">Ford Duratorq engine</span> Marketing name of a range of Ford diesel engines first introduced in 2000

The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines first introduced in 2000 for the Ford Mondeo range of cars. The larger capacity 5-cylinder units use the Power Stroke branding when installed in North American-market vehicles.

<span class="mw-page-title-main">Citroën Xantia</span> Large family car

The Citroën Xantia, pronounced "Zan–ti–a" is a large family car (D) produced by the French automaker Citroën, and designed by Bertone. Presented to the press in December 1992, the car was produced between 1992 and 2002 in Europe, with a facelift in the end of 1997.

<span class="mw-page-title-main">Peugeot 505</span> Motor vehicle

The Peugeot 505 is a large family car produced by the French manufacturer Peugeot from 1978 to 1992 in Sochaux, France. It was also manufactured in various other countries including Argentina, China, Thailand, Indonesia and Nigeria. The 505 was Peugeot's last rear-wheel drive car.

<span class="mw-page-title-main">Citroën Xsara</span> Motor vehicle

The Citroën Xsara is a compact C-segment family car, produced by the French automaker PSA Peugeot Citroën, under their Citroën marque, from 1997 to 2006. The Xsara was a development of the Citroën ZX and Peugeot 306, which shared a platform and running gear.

<span class="mw-page-title-main">Multi-valve</span> Type of car engine

In automotive engineering a multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing and may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.

<span class="mw-page-title-main">Ford AJD-V6/PSA DT17</span> Reciprocating internal combustion engine

The Ford AJD engine was first developed as a V6 with a clean-sheet architecture and variable valve timing by Ford of Europe for its then subsidiaries Jaguar Cars and Land Rover, as well as for its partner PSA Peugeot Citroën working under the Gemini joint development and production agreement. It is called the AJD-V6 in the Jaguar and Land Rover vehicles and the DT17/DT20 by Citroën and Peugeot. The engines share the same bore/stroke ratio, with the V6 displacing 2.7 L (2,720 cc) and the V8 displacing 3.6 L (3,630 cc). The V6 was launched in 2004 and the V8 in 2006. The V6 engine meets the Euro IV emissions standards. A DT20 3.0 L (2,993 cc) was added in 2009 and is based on the DT17 2.7 L (2,720 cc). The V6 is used across many vehicles, from the Citroën C5 and C6, to the Land Rover Discovery, Range Rover, multiple cars in the Jaguar range, and also the Ford Territory and next gen Ford Ranger.

<span class="mw-page-title-main">Volvo 700 Series</span> Range of executive cars

The Volvo 700 series is a range of executive cars produced by the Swedish manufacturer Volvo Cars from 1982 to 1992. The 700 series was introduced in 1982 with the luxurious 760, followed two years later by the lower priced 740 which capitalized on the prestige attained by the very similar 760. The 700 series was then gradually replaced, beginning in 1990, by the 900 series. The 700, designed by Jan Wilsgaard, was originally to have been a replacement for the 200 series, but production of that model continued until the early nineties. The expensive 780, a Bertone-designed coupé version, entered production in 1986 and departed without a direct successor only four years later.

<span class="mw-page-title-main">PSA XUD engine</span> Reciprocating internal combustion engine

The PSA XUD is a diesel engine designed and built by PSA - Peugeot and Citroën. It is an Indirect injection (IDI) engine, that uses a version of the Ricardo Consulting Engineers Ricardo Comet V prechamber cylinder head design. The engine comes in 1.8 L (1,769 cc), 1.9 L (1,905 cc), and 2.1-liter displacements. The 2.1 has 12 valves, all displacements were built either naturally aspirated or turbocharged. The XUD was the predecessor to the HDI range of engines. Early HDi Engines were a PSA design, later 16-valve engines were jointly developed with Ford.

<span class="mw-page-title-main">PSA XU engine</span> Reciprocating internal combustion engine

The PSA XU is a family of internal combustion engines used in Citroën and Peugeot automobiles. It became the dominant mid-size engine in Peugeot and Citroën products through the 1980s and 1990s.

<span class="mw-page-title-main">PSA TU engine</span> Reciprocating internal combustion engine

The TU family of small inline-four piston engines by PSA Peugeot Citroën were introduced in 1986 and used in the Peugeot and Citroën range of cars. It was first installed in the Citroën AX in October 1986, replacing the X family, although it shared many components with its predecessor. The TU is available in either petrol or a naturally aspirated diesel variant, the latter called TUD.

<span class="mw-page-title-main">Douvrin engine</span> Reciprocating internal combustion engine

The Douvrin family is an all-aluminum inline-four automobile engine designed in the early 1970s and produced from 1977 to 1996 by Compagnie Française de Mécanique, a joint-venture between PSA and Renault located in the town of Douvrin in northern France. This engine is designed by the engineer Jean-Jacques His. It was produced in the same factory as the PRV V6, which also is sometimes known outside France as the "Douvrin" V6. The Douvrin engine is also referred to as the ZDJ/ZEJ engine by Peugeot, and as the J-type engine by Renault.

<span class="mw-page-title-main">Volvo 900 Series</span> Range of executive cars made by Volvo Cars

The Volvo 900 Series is a range of executive cars produced by the Swedish manufacturer Volvo Cars from 1990 to 1998. The 900 Series was introduced in 1990 to replace the 700 Series from which it derived. Prior to the end of its production, the 960 was renamed as the Volvo S90 (saloon) and Volvo V90 (estate), and the 940 was renamed 940 Classic, becoming the last rear-wheel-drive cars from Volvo, until the 2023 Volvo XC40.

<span class="mw-page-title-main">PSA ES/L engine</span> Reciprocating internal combustion engine

The PSA ES/L engine is a V6 petrol engine used in automotive applications. It was co-developed by the PSA Group and Renault to replace the outdated V6 PRV engine. It was introduced in 1997 with the Peugeot 406 Coupé. It is designed and manufactured by the company "Française de Mécanique" for PSA and Renault. In PSA, the engine is known as the ES engine, in Renaults, the engine is known as the L engine.

References

  1. "Citroën XM". citroenet.org.uk. Retrieved 28 November 2011.
  2. Buckley, Classic & Sportscar (January 2007), p. 149
  3. Bellu, René, ed. (September 1990). "Salon: Toutes les Voitures du Monde 90/91". l'Auto Journal (in French). Paris: Homme N°1 (14 & 15): 145.
  4. Kable, Greg (13 May 1996), "Peugeot plans '706' successor to 605 sedan", Automotive News, Crain Communications, Inc.
  5. "Photo 14 - En quoi roulent les présidents de la Vème République française ?". www.largus.fr. Retrieved 16 August 2023.
  6. "Curbside Classic: 1991 Alfa Romeo 164". thetruthaboutcars.com. Retrieved 28 November 2011.
  7. "Four of a Kind: The Alfa Romeo 164 and the "Type Four" Cars". ateupwithmotor.com. Retrieved 28 November 2011.
  8. Salon 90/91, p. 68
  9. Mustmar, Andi, ed. (2 October 1991). "Produk Baru: Peugeot 605 SRi, cuma rp 120 juta" [New Product: Peugeot 605 SRi, only 120 million rupiah]. Intan Motor (in Indonesian). No. 91. Jakarta: Yayasan Beraya Press. pp. 8–9. ISSN   0215-7713.
  10. Salon 90/91, p. 69
  11. "Peugeot 605 : les chiffres de production modèle par modèle - Station Haxo". www.stationhaxo.fr (in French). 20 July 2022. Retrieved 22 September 2022.