Powder horn

Last updated
Engraved powder horns from the American Revolution in the Concord Museum Jonathan Gardner Powder horn 1776 at the Concord Mass Museum.JPG
Engraved powder horns from the American Revolution in the Concord Museum
Royal Navy powder horn with engraving Royal navy power horn.JPG
Royal Navy powder horn with engraving
Carved German powder horn, c1700 Carved German Powder Horn c1700.jpg
Carved German powder horn, c1700

A powder horn is a container for gunpowder, and was generally created from cow, ox, or buffalo horn. The term may also be used for any personal container for gunpowder, although powder flask is the strictly correct term.

Contents

Features

Typically there was a stopper at both ends, in later examples spring-loaded to close automatically for safety. [1] The wide mouth was used for refilling, while the powder was dispensed from the narrow point. In some cases the point was closed and the mouth used for both, with a powder measure, a type of scoop used to dispense the powder, and in others both ends were open and the horn merely used as a funnel. The horn was typically held by a long strap and slung over the shoulder. [2]

The inside and outside of a powder horn were often polished to make the horn translucent so that the soldier would be able to see how much powder he had left. The use of animal horn along with nonferrous metal parts ensured that the powder would not be detonated by sparks during storage and loading. Horn was also naturally waterproof and already hollow inside.

Reasons for use

Although forms of pre-packaged paper cartridges go back to the Middle Ages[ citation needed ], their extra cost and small benefit to civilian users discouraged widespread adoption of them except for militia duty. For example, on April 19, 1775, in Lexington and Concord, paper cartridges were routinely used by many civilians on the opening day of the American Revolutionary War. Similarly, the British soldiers there carried cartridge boxes holding 36 paper cartridges. The advantage of paper cartridges was speed; 3 to 4 rounds a minute were possible using paper cartridges. Measuring each charge before firing reduced the rate of fire to about one round per minute.

There were other methods, including small cloth bags containing the correct amount of powder for a single shot, that might be carried on a bandolier (again requiring a container for a supply for refilling). An important safety concern was that when reloading a muzzle-loading gun soon after a shot there might be small pieces of wadding burning in the muzzle, which would cause the new load of powder to ignite as a flash. So long as no part of the loader faced the end of the barrel this was not dangerous in itself, but if a spark reached the main supply in the powder flask a fatal explosion was likely. Various precautions were taken, both in the design and use of powder measures used with flasks, or in the flasks themselves, to prevent this from happening.

Powder horns also served the important purpose of keeping black powder dry. They began to be replaced by copper flasks in the nineteenth century. [3]

Powder horns were also used for the priming of large naval guns, and in blasting operations; apparently sometimes the horn shape was merely a convenient form of funnel in such cases, and was open at both ends and not used as a container.

Decoration

In America, a number of period horns dating from the French and Indian war throughout the American Revolution and beyond have been preserved in private collections with a few exceptions. Many decorated examples shed light on the life and history of the individuals that used them and can be classified as a medium of folk art.

Powder horns were often decorated, most often with engraving, making a form of scrimshaw, which was sometimes supplemented with color.

Rendered obsolete

The powder horn was rendered obsolete by the innovations brought about by Hall, Sharps, Spencer and the later development of self-contained cartridges that were developed and marketed successfully by Oliver Winchester, after which manufactured metallic cartridges became standard.

Notes

  1. In 1833 a letter to the English magazine The Sportsman's Cabinet, and Town and Country Magazine explained graphically the need for such safety devices, Google Books
  2. Garry 2012, p. 192.
  3. Houze 1991, p. 16.

Related Research Articles

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun that uses an explosive charge and is designed to be readily carried and used by an individual. The term is legally defined further in different countries.

Tubes and primers are used to ignite the propellant in projectile weapons.

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

A muzzleloader is any firearm in which the user loads the projectile and the propellant charge into the muzzle end of the gun. This is distinct from the modern designs of breech-loading firearms, in which user loads the ammunition into the breech end of the barrel. The term "muzzleloader" applies to both rifled and smoothbore type muzzleloaders, and may also refer to the marksman who specializes in the shooting of such firearms. The firing methods, paraphernalia and mechanism further divide both categories as do caliber.

<span class="mw-page-title-main">Flintlock</span> Firearm with flint-striking ignition

Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as the snaplock and snaphaunce.

<span class="mw-page-title-main">Caliber</span> Internal diameter of the barrel of a gun

In guns, particularly firearms, but not artillery, where a different definition may apply, caliber is the specified nominal internal diameter of the gun barrel bore – regardless of how or where the bore is measured and whether the finished bore matches that specification. It is measured in inches or in millimeters. In the United States it is expressed in hundredths of an inch; in the United Kingdom in thousandths; and elsewhere in millimeters. For example, a US "45 caliber" firearm has a barrel diameter of roughly 0.45 inches (11 mm). Barrel diameters can also be expressed using metric dimensions. For example, a "9 mm pistol" has a barrel diameter of about 9 millimeters. Since metric and US customary units do not convert evenly at this scale, metric conversions of caliber measured in decimal inches are typically approximations of the precise specifications in non-metric units, and vice versa.

<span class="mw-page-title-main">Breechloader</span> Class of gun which is loaded from the breech

A breechloader is a firearm in which the user loads the ammunition from the breech end of the barrel, as opposed to a muzzleloader, in which the user loads the ammunition from the (muzzle) end of the barrel.

A rifled breech loader (RBL) is an artillery piece which, unlike the smoothbore cannon and rifled muzzle loader which preceded it, has rifling in the barrel and is loaded from the breech at the rear of the gun.

This article explains terms used for the British Armed Forces' ordnance (weapons) and ammunition. The terms may have different meanings depending on its usage in another country's military.

<span class="mw-page-title-main">Overpressure ammunition</span> Type of small arms ammunition

Overpressure ammunition, commonly designated as +P or +P+, is small arms ammunition that has been loaded to produce a higher internal pressure when fired than is standard for ammunition of its caliber, but less than the pressures generated by a proof round. This is done typically to produce ammunition with higher muzzle velocity, muzzle energy, and stopping power, such as ammunition used for security, defensive, or hunting purposes. Because of this, +P ammunition is typically found in handgun calibers which might be used for paramilitary forces, armed security, and defensive purposes.

<span class="mw-page-title-main">Black powder substitute</span> Replacement for black powder

A black powder substitute or gunpowder substitute is a replacement for black powder (gunpowder) used in muzzleloading and cartridge firearms. Black powder substitutes have slightly different properties from gunpowder and are subject to different restrictions. Compared to gunpowder, black powder substitutes may have reduced sensitivity as an explosive, increased efficiency as a propellant powder, different density, and/or reduced ignition efficiency.

<span class="mw-page-title-main">Remington Model 1858</span> Revolver

The Remington-Beals Model Revolvers along with subsequent models and variations were percussion revolvers manufactured by Eliphalet Remington & Sons in .31 (Pocket) .36 (Navy) or .44 (Army) caliber, used during the American Civil War, and was the beginning of a successful line of medium and large frame pistols. They are commonly, though inaccurately, referred to as the Model 1858 due to the patent markings on its New Model barrels, "PATENTED SEPT. 14, 1858/E. REMINGTON & SONS, ILION, NEW YORK, U.S.A./NEW MODEL."; although wide scale production did not start until 1861.

<span class="mw-page-title-main">.50-90 Sharps</span> Black-powder rifle cartridge

The .50-90 Sharps, also known as the .50-212" Sharps, is a black-powder rifle cartridge cartridge that was introduced by Sharps Rifle Manufacturing Company in 1872 as a buffalo hunting round. Like other large black-powder rounds, it incorporates a heavy bullet and a large powder volume, leading to high muzzle energies.

The .45-90 Sharps, also known as the .45-2410" Sharps, is a black powder rifle cartridge introduced in 1877 by the Sharps Rifle Manufacturing Company and was developed for hunting and long range target shooting. In the modern day, it is used for Black Powder Cartridge Rifle competitions.

The following are terms related to firearms and ammunition topics.

A paper cartridge is one of various types of small arms ammunition used before the advent of the metallic cartridge. These cartridges consisted of a paper cylinder or cone containing the bullet, gunpowder, and in some cases, a primer or a lubricating and anti-fouling agent. Combustible cartridges are paper cartridges that use paper treated with oxidizers to allow them to burn completely upon ignition.

<span class="mw-page-title-main">Power factor (shooting sports)</span> Ranking system for the momentum of pistol cartridges in competitive practical shooting

Power Factor (PF) in practical shooting competitions refers to a ranking system used to reward cartridges with more recoil. Power factor is a measure of the momentum of the bullet, which to some degree reflects the recoil impulse from the firearm onto the shooter.

<span class="mw-page-title-main">Winchester Model 1907</span> Semi-automatic rifle

The Winchester Model 1907 is a blowback-operated, semi-automatic rifle produced by the Winchester Repeating Arms Company beginning in 1907 with production ending in 1957. It fired a cartridge of intermediate power, cycled through a semi-automatic operating mechanism, fed from a 5, 10, or 15 round detachable box magazine located immediately forward of the trigger guard. In size and handling, it is much like an M1 carbine, though the 1907 is heavier and fires a much harder hitting round.

<span class="mw-page-title-main">Powder flask</span> Small container for gunpowder

A powder flask is a small container for gunpowder, which was an essential part of shooting equipment with muzzle-loading guns, before pre-made paper cartridges became standard in the 19th century. They range from very elaborately decorated works of art to early forms of consumer packaging, and are widely collected. Many were standardized military issue, but the most decorative were generally used for sporting shooting.

<span class="mw-page-title-main">Louis-Nicolas Flobert</span>

Louis-Nicolas Flobert (1819–1894) was a French inventor. He invented the first metallic rimfire cartridge in 1845. It was a major innovation in firearms ammunition technology, as it was previously delivered as separate bullets and gunpowder, pertaining to muzzle-loading firearms. The rimfire cartridge combined both elements in a single metallic cartridge containing a percussion cap, gunpowder, and a bullet, into a single weatherproofed package or container. Before that, a "cartridge" was simply a pre-measured quantity of gunpowder together with a ball (bullet), in a small cloth bag, which also acted as wadding for the powder charge and ball.

References