Sour gas

Last updated

Sour gas is natural gas or any other gas containing significant amounts of hydrogen sulfide (H2S).

Contents

Natural gas is usually considered sour if there are more than 5.7 milligrams of H2S per cubic meter of natural gas, which is equivalent to approximately 4 ppm by volume under standard temperature and pressure. [1] [2] However, this threshold varies by country, state, or even agency or application. For instance, the Texas Railroad Commission considers a sour gas pipeline one that carries gas over 100 ppm by volume of H2S. [3] However, the Texas Commission on Environmental Quality has historically defined sour gas for upstream operations – which requires permitting, reporting, and possibly additional emission controls – as gas that contains more than 24 ppm by volume. [4] [5] Natural gas that does not contain significant amounts of hydrogen sulfide is called "sweet gas".

Although the terms "acid gas" and "sour gas" are sometimes used interchangeably, strictly speaking, a sour gas is any gas that specifically contains hydrogen sulfide in significant amounts, whereas an acid gas is any gas that contains significant amounts of acidic gases such as carbon dioxide (CO2) or hydrogen sulfide. Thus, carbon dioxide by itself is an acid gas, not a sour gas. In addition to being toxic, hydrogen sulfide in the presence of water also damages piping and other equipment handling sour gas by sulfide stress cracking. Natural gas typically contains several ppm of volatile sulfur compounds, but gas from one well in Canada is known to contain 90% hydrogen sulfide and others may have H2S contents in the tens of percent range. [6]

Methods for sweetening

Within oil refineries or natural gas processing plants, the removal of hydrogen sulfide and other organosulfur compounds is referred to as "sweetening". The sweetened product lacks the sour, foul odors of mercaptans and hydrogen sulfide.

Before a raw natural gas containing hydrogen sulfide or carbon dioxide can be used, the raw gas must be treated to remove those impurities to acceptable levels, commonly by an amine treatment process. [1] [7] The removed H2S is most often subsequently converted to by-product elemental sulfur in a Claus process or it can be treated in a wet sulfuric acid process unit where the by-product is sulfuric acid. Alternatively, the highly H2S concentrated gas, the by-product of the amine treatment plant, can be recompressed by gas compressor units specifically designed to handle highly toxic gas and injected back in the reservoir. In addition to utilizing an amine or Claus process, liquid REDOX is becoming increasingly popular. Another product removed during sweetening is carbonyl sulfide. [6]

See also

Related Research Articles

<span class="mw-page-title-main">Sulfur</span> Chemical element, symbol S and atomic number 16

Sulfur (or sulphur in British English) is a chemical element with the symbol S and atomic number 16. It is abundant, multivalent and nonmetallic. Under normal conditions, sulfur atoms form cyclic octatomic molecules with a chemical formula S8. Elemental sulfur is a bright yellow, crystalline solid at room temperature.

<span class="mw-page-title-main">Sulfur dioxide</span> Chemical compound of sulfur and oxygen

Sulfur dioxide or sulphur dioxide is the chemical compound with the formula SO
2. It is a toxic gas responsible for the odor of burnt matches. It is released naturally by volcanic activity and is produced as a by-product of copper extraction and the burning of sulfur-bearing fossil fuels.

<span class="mw-page-title-main">Hydrogen sulfide</span> Poisonous, corrosive and flammable gas

Hydrogen sulfide is a chemical compound with the formula H
2S. It is a colorless chalcogen-hydride gas, and is poisonous, corrosive, and flammable, with trace amounts in ambient atmosphere having a characteristic foul odor of rotten eggs. The underground mine gas term for foul-smelling hydrogen sulfide-rich gas mixtures is stinkdamp. Swedish chemist Carl Wilhelm Scheele is credited with having discovered the chemical composition of purified hydrogen sulfide in 1777. The British English spelling of this compound is hydrogen sulphide, a spelling no longer recommended by the Royal Society of Chemistry or the International Union of Pure and Applied Chemistry.

Acid gas is a particular typology of natural gas or any other gas mixture containing significant quantities of hydrogen sulfide (H2S), carbon dioxide (CO2), or similar acidic gases. A gas is determined to be acidic or not after it is mixed with water. The pH scale ranges from 0 to 14, anything above 7 is basic while anything below 7 is acidic. Water has a neutral pH of 7 so once a gas is mixed with water, if the resulting mixture has a pH of less than 7 that means it is an acidic gas.

<span class="mw-page-title-main">Claus process</span> Gas desulfurizing process leading to the formation of elemental sulfur

The Claus process is the most significant gas desulfurizing process, recovering elemental sulfur from gaseous hydrogen sulfide. First patented in 1883 by the chemist Carl Friedrich Claus, the Claus process has become the industry standard.

Amine gas treating, also known as amine scrubbing, gas sweetening and acid gas removal, refers to a group of processes that use aqueous solutions of various alkylamines (commonly referred to simply as amines) to remove hydrogen sulfide (H2S) and carbon dioxide (CO2) from gases. It is a common unit process used in refineries, and is also used in petrochemical plants, natural gas processing plants and other industries.

<span class="mw-page-title-main">Carbonyl sulfide</span> Chemical compound

Carbonyl sulfide is the chemical compound with the linear formula OCS. It is a colorless flammable gas with an unpleasant odor. It is a linear molecule consisting of a carbonyl group double bonded to a sulfur atom. Carbonyl sulfide can be considered to be intermediate between carbon dioxide and carbon disulfide, both of which are valence isoelectronic with it.

Sour crude oil is crude oil containing a high amount of the impurity sulfur. It is common to find crude oil containing some impurities. When the total sulfur level in the oil is more than 0.5%, the oil is called "sour".

<span class="mw-page-title-main">Industrial gas</span> Gaseous materials produced for use in industry

Industrial gases are the gaseous materials that are manufactured for use in industry. The principal gases provided are nitrogen, oxygen, carbon dioxide, argon, hydrogen, helium and acetylene, although many other gases and mixtures are also available in gas cylinders. The industry producing these gases is also known as industrial gas, which is seen as also encompassing the supply of equipment and technology to produce and use the gases. Their production is a part of the wider chemical Industry.

<span class="mw-page-title-main">Hydrodesulfurization</span> Chemical process used to remove sulfur in natural gas and oil refining

Hydrodesulfurization (HDS), also called hydrotreatment or hydrotreating, is a catalytic chemical process widely used to remove sulfur (S) from natural gas and from refined petroleum products, such as gasoline or petrol, jet fuel, kerosene, diesel fuel, and fuel oils. The purpose of removing the sulfur, and creating products such as ultra-low-sulfur diesel, is to reduce the sulfur dioxide emissions that result from using those fuels in automotive vehicles, aircraft, railroad locomotives, ships, gas or oil burning power plants, residential and industrial furnaces, and other forms of fuel combustion.

In the upstream oil industry, a gas–oil separation plant (GOSP) is temporary or permanent facilities that separate wellhead fluids into constituent vapor (gas) and liquid components.

<span class="mw-page-title-main">Natural-gas processing</span> Industrial processes designed to purify raw natural gas

Natural-gas processing is a range of industrial processes designed to purify raw natural gas by removing impurities, contaminants and higher molecular mass hydrocarbons to produce what is known as pipeline quality dry natural gas in order to prepare it for pipeline distribution and final use.

Selexol is the trade name for an acid gas removal solvent that can separate acid gases such as hydrogen sulfide and carbon dioxide from feed gas streams such as synthesis gas produced by gasification of coal, coke, or heavy hydrocarbon oils. By doing so, the feed gas is made more suitable for combustion and/or further processing. It is made up of dimethyl ethers of polyethylene glycol.

Rectisol is the trade name for an acid gas removal process that uses methanol as a solvent to separate acid gases such as hydrogen sulfide and carbon dioxide from valuable feed gas streams. By doing so, the feed gas is made more suitable for combustion and/or further processing. Rectisol is used most often to treat synthesis gas (primarily hydrogen and carbon monoxide) produced by gasification of coal or heavy hydrocarbons, as the methanol solvent is well able to remove trace contaminants such as ammonia, mercury, and hydrogen cyanide usually found in these gases. As an acid gas and large component of valuable feed gas streams, CO2 is separated during the methanol solvent regeneration.

<span class="mw-page-title-main">History of the petroleum industry in Canada (natural gas)</span>

Natural gas has been used almost as long as crude oil in Canada, but its commercial development was not as rapid. This is because of special properties of this energy commodity: it is a gas, and it frequently contains impurities. The technical challenges involved to first process and then pipe it to market are therefore considerable. Furthermore, the costs of pipeline building make the whole enterprise capital intensive, requiring both money and engineering expertise, and large enough markets to make the business profitable.

The Shell–Paques process, also known by the trade name of Thiopaq O&G, is a gas desulfurization technology for the removal of hydrogen sulfide from natural-, refinery-, synthesis- and biogas. The process was initially named after the Shell Oil and Paques purification companies. After accession of a dedicated joint venture by the founders, Paqell B.V., the trade name for applications in the Oil & Gas industry was changed to "THIOPAQ O&G". It is based on the biocatalytical conversion of sulfide into elemental sulfur. It operates at near-ambient conditions of temperature, about 30-40 °C, and pressure which results in inherent safety. It is an alternative to, for example, the Claus process.

<span class="mw-page-title-main">Methyl diethanolamine</span> Chemical compound

Methyl diethanolamine, also known as N-methyl diethanolamine and more commonly as MDEA, is the organic compound with the formula CH3N(C2H4OH)2. It is a colorless liquid with an ammonia odor. It is miscible with water, ethanol and benzene. A tertiary amine, it is widely used as a sweetening agent in chemical, oil refinery, syngas production and natural gas.

A biogas upgrader is a facility that is used to concentrate the methane in biogas to natural gas standards. The system removes carbon dioxide, hydrogen sulphide, water and contaminants from the biogas. One technique for doing this uses amine gas treating. This purified biogas is also called biomethane. It can be used interchangeably with natural gas.

CrystaSulf is the trade name for a chemical process used for removing hydrogen sulfide (H2S) from natural gas, synthesis gas and other gas streams in refineries and chemical plants. CrystaSulf uses a modified liquid-phase Claus reaction to convert the hydrogen sulfide (H2S) into elemental sulfur which is then removed from the process by filtration. CrystaSulf is used in the energy industry as a mid-range process to handle sulfur amounts between 0.1 and 20 tons per day. Below 0.1 tons of sulfur per day is typically managed by H2S Scavengers and applications above 20 tons per day are typically treated with the Amine – Claus process.

The SNOX process is a process which removes sulfur dioxide, nitrogen oxides and particulates from flue gases. The sulfur is recovered as concentrated sulfuric acid and the nitrogen oxides are reduced to free nitrogen. The process is based on the well-known wet sulfuric acid process (WSA), a process for recovering sulfur from various process gasses in the form of commercial quality sulfuric acid (H2SO4).

References

  1. 1 2 NaturalGas.org website page Processing Natural Gas
  2. ↑ Air Dispersion Modeling Conversions and Formulas
  3. ↑ Pipeline Definitions Archived 2012-05-02 at the Wayback Machine Railroad Commission of Texas.
  4. ↑ Permit by Rule Chapter 106 - July 31, 2008 Scroll down to PDF page 38 of 58 PDF pages.
  5. ↑ Oil and Gas Handling and Production Facilities Title 30 Texas Administrative Code § 106.352(l) Texas Commission on Environmental Quality (TCEQ). Scroll down to page 2.
  6. 1 2 Georg Hammer, Torsten Lübcke, Roland Kettner, Mark R. Pillarella, Herta Recknagel, Axel Commichau, Hans-Joachim Neumann and Barbara Paczynska-Lahme "Natural Gas" in Ullmann's Encyclopedia of Industrial Chemistry, 2006, Wiley-VCH, Weinheim. doi : 10.1002/14356007.a17_073
  7. ↑ Energy Information Agency website page. Archived 2011-03-04 at the Wayback Machine Natural Gas Processing: The Crucial Link Between Natural Gas Production and Its Transportation to Market


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.