Toyota MZ engine

Last updated
Toyota MZ engine
1MZFE-engine.jpg
1MZ-FE engine in a Toyota Windom
Overview
Manufacturer Toyota Motor Corporation
Production1993–2014
Layout
Configuration V6
Displacement 2.5 L (2,496 cc)
3.0 L (2,994 cc)
3.3 L (3,310 cc)
Cylinder bore 87.5 mm (3.44 in)
92 mm (3.62 in)
Piston stroke 83 mm (3.27 in)
69.2 mm (2.72 in)
Cylinder block materialAluminium alloy
Cylinder head materialAluminium alloy
Valvetrain DOHC 4 valves x cyl.
Combustion
Supercharger TRD kit (in some versions)
Fuel system Multi-port fuel injection
Fuel type Gasoline
Cooling system Water cooled
Output
Power output 194–242 hp (145–180 kW; 197–245 PS)
Torque output 180–242 lb⋅ft (244–328 N⋅m)
Chronology
Predecessor Toyota VZ engine
Successor Toyota GR engine

The Toyota MZ engine family is a piston V6 engine series. The MZ series has an aluminium engine block and aluminium alloy DOHC cylinder heads. The cylinders are lined with cast iron, and is of a closed deck design (no open space between the bores). The engine is a 60 degree V6 design. It uses multi-port fuel injection (MFI), four valves per cylinder, a one-piece cast camshaft and a cast aluminium intake manifold. The MZ family is a lightweight V6 engine of an all-aluminium design, using lighter weight parts than the heavier duty VZ block engines in an effort to lower production costs, decrease engine weight, and decrease reciprocating weight without sacrificing reliability. Toyota sought to enhance the drivability pattern of the engine (over the 3VZ) at exactly 3000 rpm, since that was the typical engine speed for motors cruising on the highway. The result was less cylinder distortion coupled with the decreased weight of rotating assemblies, smoother operation at that engine speed, and increased engine efficiency.[ citation needed ]

Contents

This engine has been phased out in most markets, replaced by variants of the new GR series.

1MZ-FE

Toyota 1MZ-FE engine without VVT-i 1999Camry1mzfev6engine.jpg
Toyota 1MZ-FE engine without VVT-i

The 1MZ-FE is a 3.0 L (2,994 cc) dual overhead cam (DOHC) V6 engine. Bore and stroke is 87.5 mm × 83 mm (3.44 in × 3.27 in). Output is 194–201 hp (145–150 kW; 197–204 PS) at 5200–5400 rpm with 183–209 lb⋅ft (248–283 N⋅m) of torque at 4400 rpm. Horsepower ratings dropped after the Society of Automotive Engineers implemented a new power measurement system for vehicle engines, Toyota engines rated on 87 octane dropped the most, compared to the same engines used by Lexus rated on 91 octane. It has bucket tappets and was designed for good fuel economy of 19 mpgUS (12 L/100 km; 23 mpgimp) city and 25 mpgUS (9.4 L/100 km; 30 mpgimp) highway without an overall performance trade-off. These engines are prone to oil gelling. Another name for the issue was "engine sludge". [1] There was a class action lawsuit due to this problem. [2] It is very important to the life of these engines that oil changes are done on a regular basis.

The 1MZ-FE was on Ward's 10 Best Engines list for 1996. [3]

Applications:

Toyota Racing Development offered a bolt-on TRD supercharger kit for the MY1997–2000 Camry, MY1998–2000 Sienna and MY1999–2000 Solara. Power output was bumped to 242 hp (180 kW; 245 PS) and 242 lb⋅ft (328 N⋅m) of torque.

The 1MZ-FE with VVT-i is used in the Avalon, Highlander, Sienna and Camry. Output is 210 hp (157 kW; 213 PS) at 5800 rpm with 222 lb⋅ft (301 N⋅m) of torque at 4400 rpm. Early versions of the VVT-i 1MZ used a dual throttle body, cast aluminum intake manifold, and EGR block off plates on the exhaust manifolds. Later versions used a drive-by-wire/electronic throttle control.

Applications:

2MZ-FE

Toyota 2MZ-FE engine Engine-2mzfe.jpg
Toyota 2MZ-FE engine

The 2MZ-FE is a 2.5 L (2,496 cc) engine replacing the 4VZ-FE as the worldwide 2.5 L V6. Bore and stroke is 87.5 mm × 69.2 mm (3.44 in × 2.72 in). Output is 197 hp (147 kW; 200 PS) at 6000 rpm with torque of 180 lb⋅ft (244 N⋅m) at 4600 rpm.

Applications:

3MZ-FE

3MZ-FE in a 2004 Lexus ES330 3MZ-FE in 2004 Lexus ES330.jpg
3MZ-FE in a 2004 Lexus ES330

The 3MZ-FE is a 3.3 L (3,310 cc) version. Bore and stroke is 92 mm × 83 mm (3.62 in × 3.27 in). Output is 225 hp (168 kW; 228 PS) with 240 lb⋅ft (325 N⋅m) of torque in the Camry and 230 hp (172 kW; 233 PS) with 242 lb⋅ft (328 N⋅m) of torque in the Sienna and Highlander. It also features VVT-i, ETCS-i (Electronic Throttle Control System — intelligent/DBW), PA6 plastic intake, and increased throttle body diameter over the 1MZ. The 3MZ uses a new flat-type knock sensor, which is a departure from the typical resonator type knock sensor used on the previous MZs. Previous MZs had poor knock control, or perhaps oversensitivity when detecting knock, and power loss up to 20 hp (15 kW) may be realized due to erratic ignition timing when using an octane lower than 91. The new flat-type knock sensor is a completely different design and detects more frequencies than the traditional resonator type. This provides the ECU with more accurate data. A bolt goes through the center of the knock sensor, which then mates the sensor to the block on each bank.

Applications:

See also

Related Research Articles

<span class="mw-page-title-main">Toyota Avalon</span> Full-size car produced by Toyota

The Toyota Avalon is a full-size sedan produced by Toyota. It is Toyota's largest front-wheel drive sedan and serves as its flagship sedan in the United States, Canada, China and the Middle East. It was also produced in Australia from April 2000 until June 2005, when it was replaced in November 2006 by the Aurion. The first production Avalon rolled off the TMMK assembly line in Georgetown, Kentucky, in September 1994, and subsequent generations have all been manufactured at the Kentucky location to date.

<span class="mw-page-title-main">VVT-i</span> Automobile variable valve timing technology

VVT-i, or Variable Valve Timing with intelligence, is an automobile variable valve timing technology developed by Toyota. It was introduced in 1995 with the 2JZ-GE engine found in the JZS155 Toyota Crown and Crown Majesta.

<span class="mw-page-title-main">Toyota Sienna</span> Minivan model by Toyota

The Toyota Sienna is a minivan manufactured and marketed by Toyota primarily for the North American market. It is named for the Italian city of Siena, in the region of Tuscany. It replaced the first generation Previa van in 1997 with a more conventional front-wheel drive layout and shares a heavily revised platform with the Camry. Both the Previa and original Sienna were smaller than the other minivans they competed against, but a redesign in 2003 increased the dimensions to match those of its competitors.

<span class="mw-page-title-main">Toyota Camry Solara</span> Motor vehicle

The Toyota Camry Solara, popularly known as the Toyota Solara, is a mid-size coupé/convertible built by Toyota. The Camry Solara is mechanically based on the Toyota Camry and effectively replaced the discontinued Camry Coupé (XV10); however, in contrast with its predecessor's conservative design, the Camry Solara was designed with a greater emphasis on sportiness, with more rakish styling, and uprated suspension and engine tuning intended to provide a sportier feel. The coupe was launched in late 1998 for model year 1999. In 2000, the convertible was introduced, effectively replacing the Celica convertible in Toyota's North American lineup.

<span class="mw-page-title-main">Toyota AZ engine</span> Reciprocating internal combustion engine

The Toyota AZ engine family is a straight-4 piston engine series. The AZ series uses an aluminium engine block with cast iron cylinder liners and aluminium DOHC cylinder head. The engine series features many advanced technologies including slant-squish combustion chambers, offset cylinder and crank centers, and the VVT-i continuously variable intake valve timing system. The aluminium engine measures 626 mm (24.6 in) long, 608 mm (23.9 in) wide, and 681 mm (26.8 in) tall.

<span class="mw-page-title-main">Toyota VZ engine</span> Reciprocating internal combustion engine

The Toyota VZ engine family is a series of V6 gasoline piston engines ranging from 2.0 to 3.4 L in displacement and both SOHC and DOHC configurations. It was Toyota's first V6 engine, being made as a response to Nissan’s VG engine, one of Japan’s first mass-produced V6 engines.

<span class="mw-page-title-main">Toyota UZ engine</span> Reciprocating internal combustion engine

The Toyota UZ engine family is a gasoline fueled 32-valve quad-camshaft V8 piston engine series used in Toyota's luxury offerings and sport utility vehicles. Three variants have been produced: the 1UZ-FE, 2UZ-FE, and 3UZ-FE. Production spanned 24 years, from 1989 to mid 2013, ending with the final production of the 3UZ-FE-powered Toyota Crown Majesta I-FOUR. Toyota's UZ engine family was replaced by the UR engine family.

<span class="mw-page-title-main">Toyota G engine</span> Reciprocating internal combustion engine

The Toyota Motor Corporation G-family engine is a family of straight-6 piston engines produced from 1979 to 2008. It is notable in that only a single displacement, 2.0 L (1,988 cc), was produced in this series. Initially belt-driven OHC non-interference engines, multivalve DOHC and variable valve timing were added later during the production run. The 1G-GEU was Toyota's first mass produced four-valve twincam engine. A prototype version of the 1G-GEU called the LASREα–X, featuring twin-turbos, variable valve timing and intake as well as variable displacement, was fitted to the Toyota FX-1 show car at the 1983 Tokyo Motor Show. It showcased a number of technologies which were later to become commonplace.

<span class="mw-page-title-main">Toyota GR engine</span> Reciprocating internal combustion engine

The Toyota GR engine family is a gasoline, open-deck, piston V6 engine series. The GR series has a 60° die-cast aluminium block and aluminium DOHC cylinder heads. This engine series also features 4 valves per cylinder, forged steel connecting rods and crankshaft, one-piece cast camshafts, a timing chain, and a cast aluminium lower intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S.

<span class="mw-page-title-main">Toyota S engine</span> Reciprocating internal combustion engine

The Toyota S Series engines are a family of straight-four petrol engines with displacements between 1.8 and 2.2 litres, produced by Toyota Motor Corporation from January 1980 to August 2007. The S series has cast iron engine blocks and aluminium cylinder heads.

<span class="mw-page-title-main">Toyota Motor Manufacturing Kentucky</span> Automobile plant in Georgetown, Kentucky, US

Toyota Motor Manufacturing Kentucky (TMMK) is an automobile manufacturing factory in Georgetown, Kentucky, United States. It is a subsidiary of Toyota Motor North America, itself a subsidiary of Toyota Motor Corporation of Japan. The plant assembles the Toyota Camry, Toyota RAV4, and Lexus ES along with producing engines.

<span class="mw-page-title-main">Toyota KR engine</span> Reciprocating internal combustion engine

The Toyota KR engine family is a straight-3 piston engine, designed by Daihatsu, a subsidiary of Toyota. The 1KR series uses aluminium engine blocks and chain driven DOHC cylinder heads. It uses multi-point fuel injection, and has 4 valves per cylinder. Some versions have VVT-i variable valve timing. The engine is exceptionally light: 69 kg (152 lb) with all ancillaries.

Toyota Motor Corporation's U family is a family of automatic front-wheel drive/rear-wheel drive/four-wheel drive transmissions found in later vehicle models.

<span class="mw-page-title-main">Ford Duratec V6 engine</span> Reciprocating internal combustion engine

The Ford Duratec V6, is an aluminum DOHC V6 engine with a 60° bank angle introduced in 1993 with the Ford Mondeo. The primary engineering input came from Porsche, who was developing a similar V6 before selling the engineering to Ford, and Cosworth, who helped with cylinder head manufacturing. The Jaguar AJ-V6 engine is similar but adds variable valve timing.

<span class="mw-page-title-main">Toyota UR engine</span> Type of engine made by Toyota

The Toyota UR engine family is a 32-valve dual overhead camshaft V8 piston engine series which was first introduced in 2006, as the UZ series it replaced began phasing out. Production started with the 1UR-FSE engine with D-4S direct injection for the 2007 Lexus LS. The series launched with a die-cast aluminum engine block, aluminum cylinder heads and magnesium cylinder head covers. All UR engines feature variable valve timing for both intake and exhaust cams or Dual VVT-i. Timing chains are used to drive the camshafts. The UR engine has been produced in 4.6, 5.0, and 5.7-liter displacement versions.

<span class="mw-page-title-main">Toyota ZR engine</span> Type of engine created by Toyota

The ZR engine is a family of straight-four 16-valve all-aluminum and water cooled gasoline engines with a die-cast aluminum block and variable valve timing developed by Toyota Motor Corporation, produced from 2007. Engines displace from 1.6 to 2.0 liters. Most engines in this family are equipped with Toyota's dual VVT-i technology that optimizes both intake and exhaust valve timing. This engine family is also the first to use Toyota's Valvematic system, first appearing on the Noah and Voxy in 2007 and then the European Avensis in 2009.

<span class="mw-page-title-main">Toyota AR engine</span> Toyota 4-cylinder engine introduced in 2008

The AR engine family is an Inline-4 piston engine series by Toyota, first introduced in 2008 for the RAV4, and subsequently for the Highlander, Venza, Camry and Scion tC.

<span class="mw-page-title-main">Toyota NR engine</span> Reciprocating internal combustion engine

The Toyota NR engine family is a series of small inline-four piston engines designed and manufactured by Toyota, with capacities between 1.2 and 1.5 litres.

<span class="mw-page-title-main">Toyota Camry (XV30)</span> Motor vehicle

The Toyota Camry (XV30) is a mid-size car produced by Toyota from June 2001 to January 2006. The XV30 series represented the fifth generation of the Toyota Camry in all markets outside Japan, which followed a different generational lineage. The XV30 range is split into different model codes indicative of the engine. Four-cylinder models utilize the ACV30 and ACV35 codes, with MCV30 (3.0-liter) and MCV31 (3.3-liter) designating the six-cylinder versions.

<span class="mw-page-title-main">Toyota Dynamic Force engine</span> Engine series from Toyota

The Dynamic Force engines are a family of internal combustion engines developed by Toyota under the brand's Toyota New Global Architecture (TNGA) strategy. The engines can be fueled by petrol (gasoline) or ethanol and can be combined with electric motors in a hybrid drivetrain. The engines were developed alongside the TNGA family of vehicle platforms, as part of a company-wide effort to simplify the vehicles being produced by Toyota.

References

  1. "The black death of sludge". Consumers Reports. Consumers union. February 2014. Retrieved September 12, 2016.
  2. "Archived copy" (PDF). oilgelsettlement.com. Archived from the original (PDF) on 18 January 2007. Retrieved 12 January 2022.{{cite web}}: CS1 maint: archived copy as title (link)
  3. "Ward's 10 Best Engines Winners, 1995-2012". Wards Intelligence. Ward's. Jan 2012.