.284 Winchester

Last updated
.284 Winchester
.284 Winchester with .223 Rem and .308 Win.JPG
.284 Winchester (center) with .308 Win (left) and 7mm Remington Magnum (right)
Type Rifle
Place of origin United States
Production history
Designer Winchester
Designed1963
ManufacturerWinchester
Produced1963–present
Specifications
Case typerebated rim, bottleneck
Bullet diameter7.21 mm (0.284 in)
Land diameter7.00 mm (0.276 in)
Neck diameter8.13 mm (0.320 in)
Shoulder diameter12.06 mm (0.475 in)
Base diameter12.72 mm (0.501 in)
Rim diameter12.01 mm (0.473 in)
Rim thickness1.37 mm (0.054 in)
Case length55.12 mm (2.170 in)
Overall length71.12 mm (2.800 in)
Case capacity4.29 cm3 (66.2  gr H2O)
Rifling twist254 mm (1 in 10 in)
Primer typeLarge rifle
Maximum pressure (C.I.P.)440.00 MPa (63,817 psi)
Maximum pressure (SAAMI)386 MPa (56,000 psi)
Ballistic performance
Bullet mass/typeVelocityEnergy
100 gr (6 g) HDY 100 HP3,175 ft/s (968 m/s)2,238 ft⋅lbf (3,034 J)
120 gr (8 g) SPR 120 SP2,968 ft/s (905 m/s)2,347 ft⋅lbf (3,182 J)
139 gr (9 g) HDY 139 SP2,845 ft/s (867 m/s)2,498 ft⋅lbf (3,387 J)
150 gr (10 g) Super-X Power-Point2,860 ft/s (870 m/s)2,724 ft⋅lbf (3,693 J)
Test barrel length: 24 in (610 mm)
Source(s): Winchester Ammunition Accurate Powder [1]

The .284 Winchester is a firearm cartridge, introduced by Winchester in 1963.

Contents

The .284 Winchester was designed to achieve .270 Winchester and .280 Remington performance from the new Winchester Model 100 autoloader and Winchester Model 88 lever-action rifles. The result was a 7 mm cartridge with about the same overall length as the .308 Winchester but with a wider body, that yields a powder capacity about the same as that of the .270 Winchester and .280 Remington.[ citation needed ]

.284 Winchester has enjoyed a resurgence due to interest from long-range competitive shooters. Winchester has continued to produce brass cases for this cartridge since 1963. [2]

History

The Savage Model 99 lever-action, Winchester Model 100 autoloader and Winchester Model 88 lever-action rifles were available in .284 Winchester, and Ruger produced a small run of Ruger M77 rifles in this caliber. Ultra Light Arms still builds Model 20 rifles in .284 Winchester.

Cartridge dimensions

The .284 Winchester has 4.29 ml (66 grains H2O) of cartridge case capacity. The case has a rebated rim and a body almost as large in diameter as that of typical belted magnum cases.

.284 Winchester.svg

.284 Winchester maximum C.I.P. cartridge dimensions All sizes in millimeters (mm). [3]

Americans would define the shoulder angle at alpha/2 = 35 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 7.00 mm, Ø grooves = 7.19 mm, land width = 2.79 mm and the primer type is large rifle.

According to the official C.I.P. guidelines the .284 Winchester case can handle up to 440 MPa (63,816 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.
The SAAMI pressure limit for the .284 Winchester is set at 56,000 PSI (386 MPa). [1]

When the cartridge over all length is maintained, deeper-seating is necessary with long heavier bullets. This reduces usable powder capacity and hence performance compared to longer-action cartridges like the .280 Remington.

The American .280 Remington cartridge has probably the closest ballistics to the .284 Winchester. The .280 Remington has a lower 405 MPa (58,740 psi) C.I.P maximum allowed chamber pressure and slightly more case capacity.

Contemporary use

For open-country hunting of deer and pronghorn, the .284 Winchester loaded with the Speer 130-grain (8.4 g) spitzer at 3,100 ft/s (940 m/s) is adequate, even in a short-action rifle. Larger game calls for bullets weighing from 150 to 160 grains (10 g). H4831, H450, H4350, H414, IMR-4350, and IMR-4831 are excellent powders. [4]

These ballistics show that the .284 Winchester is as good as the .280 Remington with the same weight bullet. The short mountain rifles for which the .284 Winchester seems best suited seldom come with 24-inch barrels. Aside from Winchester, no other major company has ever loaded factory ammunition for the .284 Winchester. [4]

The cartridge is sometimes used for long-range target shooting like F-Class and 1,000 yd/m long range competitions, where participants usually handload their ammunition. For this application the .284 Winchester is loaded with 175 and 180 gr very-low-drag bullets. [5]

The .284 Winchester is not popular in Europe, where it competes with the 7×64mm, to which it is almost ballistically identical. When compared to the .284 Winchester the 7×64mm has a lower C.I.P. maximum allowed chamber pressure and, as a European 7 mm cartridge, has a slightly larger bore. European 7 mm cartridges all have 7.24 mm (0.285 in) grooves Ø diameter. American 7 mm cartridges have 7.21 mm (0.284 in) grooves Ø.

Wildcats

While it has been occasionally factory chambered in various rifles, the chief reason for its survival has always been wildcatting. Wildcats are not governed by C.I.P. or SAAMI rules so wildcatters can capitalize on achievable high operating pressures. With the .284 Winchester as the parent case wildcatters have created 6mm-284, 6.5mm-284, .284 Shehane, .30-284, .338-284,35-284, .450 Bushmaster and the .375-284 variants and the .475 Wildey Magnum pistol cartridge.

In those countries where restrictions prevent civilian use of firearms chambered in a Military cartridge, the .30-284 wildcat has been a favored option to convert military surplus rifles. Russian Mosin–Nagant and Swiss Schmidt–Rubin rifles, as well as 7.5×54 French MAS caliber rifles may be rechambered. The easiest way to do this is to rechamber the firearm to something that uses the same barrel bore, such as .30 cal. or 7.62 mm, but completely removes the old chamber during the process. The C.I.P. has recognized and registered both the 30-284 NOLASCO, [6] and the extremely similar (in the US considered a "Wildcat cartridge" based on the .284 Winchester) 30-284 Win. [7] Both these chamberings completely remove the original 7.5×54mm MAS chamber. They also both have the same C.I.P. pressure ratings as the 7.62×54mm MAS cartridge but differ in their overall length due to the length of the bullet - the NOLASCO carrying a longer bullet for better feeding and an improved ballistic coefficient, and to meet a somewhat more common European overall length of 76 mm, the same as the 7.5x54mm French [6] and very close to the 7.5×55mm Swiss.

In 2008, the most popular and useful .284 Winchester-case based cartridge was not the original, but rather the 6.5-284 Norma. This former wildcat, made by necking down the original Winchester .284 casing to 6.5mm (.264), was developed for long range target shooting where participants usually handload their ammunition. At that time, it was one of the most used non-wildcat cartridges by match shooters in F-Class and 1000 yd/m benchrest long range competitions. [8] In 2022, because of advancements in bullet design, the original Winchester .284 case has made a comeback as the most preferred cartridge in F-class competitions with other .284 caliber (7mm) cartridge variants being wildcatted off the venerable original design (e.g., .284 KMR, .284 Shehane, .284 Wheeler, .284 Ackley Improved).

Many owners of old Swiss service rifles in the United States are also now reforming .284 Winchester cartridge cases up to produce results analogous to the more expensive 7.5×55mm Swiss GP11 cartridge.

The Finnish cartridge company Lapua started making .284 Winchester brass (Product No. 4 PH 7284), again, since Spring 2021. [9]

See also

Related Research Articles

<span class="mw-page-title-main">.223 Remington</span> Firearms cartridge

The .223 Remington is a rimless, bottlenecked, centerfire rifle cartridge. It was developed in 1957 by Remington Arms and Fairchild Industries for the U.S. Continental Army Command of the United States Army as part of a project to create a small-caliber, high-velocity firearm. The .223 Remington is considered one of the most popular common-use cartridges and is currently used by a wide range of semi-automatic and manual-action rifles.

<span class="mw-page-title-main">.308 Winchester</span> Rimless, centerfire, bottlenecked rifle cartridge

The .308 Winchester is a smokeless powder rimless bottlenecked rifle cartridge widely used for hunting, target shooting, police, military, and personal protection applications globally. It is similar, but not identical, to the 7.62×51mm NATO cartridge.

<span class="mw-page-title-main">7mm-08 Remington</span> Necked down .308Win

The 7mm-08 Remington is a rifle cartridge that is almost a direct copy of a wildcat cartridge developed around 1958 known as the 7mm/308. As these names would suggest, it is the .308 Winchester case necked down to accept 7 mm (.284) bullets with a small increase in case length. Of cartridges based upon the .308, it is the second most popular behind only the .243 Winchester. However, the .308 is more popular than both. In 1980, the Remington Arms company popularized the cartridge by applying its own name and offering it as a chambering for their Model 788 and Model 700 rifles, along with a limited-run series within their Model 7600 pump-action rifles during the early 2000s.

<span class="mw-page-title-main">.257 Weatherby Magnum</span> Rifle cartridge

The .257 Weatherby Magnum is a .257 caliber (6.53 mm) belted bottlenecked cartridge. It is one of the original standard length magnums developed by shortening the .375 H&H Magnum case to approx. 2.5 in (64 mm). Of the cartridges developed by Roy Weatherby, the .257 Weatherby Magnum was known to have been his favorite, and the cartridge currently ranks third in Weatherby cartridge sales, after the .30-378 Weatherby Magnum and the .300 Weatherby Magnum.

<span class="mw-page-title-main">.375 H&H Magnum</span> British rifle cartridge

The .375 H&H Magnum, also known as .375 Holland & Holland Magnum, is a medium-bore rifle cartridge introduced in 1912 by London based gunmaker Holland & Holland. The .375 H&H cartridge featured a belt to ensure the correct headspace, which otherwise might be unreliable, given the narrow shoulder of the cartridge case. The cartridge was designed to use cordite which was made in long strands – hence the tapered shape of the case, which, as a beneficial side effect also helped in smooth chambering and extraction from a rifle's breech.

<span class="mw-page-title-main">.280 Remington</span> US rifle cartridge

The .280 Remington, also known as the 7mm-06 Remington and 7mm Express Remington, was introduced in 1957 for the Remington model 740, 760, 721, and 725 rifles.

<span class="mw-page-title-main">7mm Remington Magnum</span> Rifle cartridge

The 7mm Remington Magnum rifle cartridge was introduced as a commercially available round in 1962, along with the new Remington Model 700 bolt-action rifle. It is a member of the belted magnum family that is directly derived from the venerable .375 H&H Magnum. The original purpose of the belted magnum concept taken from the .300 H&H Magnum and .375 H&H Magnum, was to provide precise headspace control, since the sloping shoulders, while easing cartridge extraction, were unsuitable for this purpose. Improved cartridge extraction reliability is desirable while hunting dangerous game, in particular when a fast follow-up shot is required. The 7mm Remington Magnum is based on the commercial .264 Winchester Magnum, .338 Winchester Magnum, and .458 Winchester Magnum, which were based on the same belted .300 H&H Magnum and .375 H&H Magnum cases, trimmed to nearly the same length as the .270 Weatherby Magnum.

<span class="mw-page-title-main">8mm Remington Magnum</span> Rifle cartridge

The 8mm Remington Magnum belted rifle cartridge was introduced by Remington Arms Company in 1978 as a new chambering for the model 700 BDL rifle. The 8mm Remington Magnum's parent case is the .375 H&H Magnum. It is a very long and powerful cartridge that cannot be used in standard length actions, such as those that accommodate the .30-06 Springfield.

The 7.5×54mm French, 7.5 French, or 7.5 MAS is a rimless bottlenecked rifle cartridge. It was developed by France as an update to the 7.5×57mm MAS mod. 1924 cartridge. It replaced the obsolete 8×50mmR Lebel round used during World War I, and served as the French service cartridge until superseded by the 5.56×45mm NATO and 7.62×51mm NATO cartridges in the 1970s and 1980s.

<span class="mw-page-title-main">8×68mm S</span>

The 8×68mm S rebated rim bottlenecked centerfire rifle cartridge was developed in the 1930s by August Schüler of the August Schüler Waffenfabrik, Suhl, Germany as a magnum hunting cartridge that would just fit and function in standard-sized Mauser 98 bolt-action rifles. The bore has the same lands and grooves diameters as the German 7.92×57mm Mauser service cartridge. This is one of the early examples where a completely new rifle cartridge was developed by a gunsmith to fit a specific popular and widespread type of rifle.

The 6.5×47mm Lapua is a smokeless powder rimless bottlenecked rifle cartridge that was developed specifically for 300–1,000 m (328–1,094 yd) competition shooting by ammunition maker Nammo Lapua and the Swiss rifle manufacturer Grünig & Elmiger AG in 2005. Other common names for this cartridge include 6.5×47mm.

The .264 Winchester Magnum is a belted, bottlenecked rifle cartridge. Except for the .244 H&H Magnum and .257 Weatherby Magnum, it is the smallest caliber factory cartridge derived from the 2.85 in (72 mm) Holland & Holland belted magnum case. It was introduced in the late 1950s and early 1960s with the .338 Winchester Magnum and the .458 Winchester Magnum as one of a family of short-cased 2.5 in (64 mm) belted magnum cartridges developed by Winchester based on the .375 Holland & Holland parent case. It was officially introduced to the public by Winchester in 1959. After many years of dwindling use it began enjoying a mild resurgence in popularity in the mid-2000s among long range rifle enthusiasts and reloaders due to the high ballistic coefficient of the heavier 6.5mm bullets and increasing popularity of cartridges such as 6.5mm Creedmoor, .260 Remington, 6.5 Grendel, benchrest and wildcat cartridges in 6.5mm.

The .260 Remington cartridge was introduced by Remington in 1997. Many wildcat cartridges based on the .308 Winchester case had existed for years before Remington standardized this round.

The 6.5×68mm rebated rim bottlenecked centerfire rifle cartridge and its sister cartridge the 8×68mm S were developed in the 1930s by August Schüler from the August Schüler Waffenfabrik, Suhl, Germany as magnum hunting cartridges that would just fit and function in standard-sized Mauser 98 bolt-action rifles. This is one of the early examples where a completely new rifle cartridge was developed by a gunsmith to fit a specific popular and widespread type of rifle.

<span class="mw-page-title-main">7×64mm</span> German hunting rifle cartridge

The 7×64mm is a rimless bottlenecked centerfire cartridge developed for hunting. As is customary in European cartridges, the 7 denotes the 7 mm bore diameter and the 64 denotes the 64 mm (2.5 in) case length. The 7×64mm is a popular hunting cartridge in Central Europe due to its 11.95 mm (0.470 in) case head diameter and 84 mm (3.3 in) overall length allowing it to easily be chambered in the Mauser 98 bolt-action rifle that was once standard German military issue.

<span class="mw-page-title-main">.416 Remington Magnum</span> Rifle cartridge

The .416 Remington Magnum is a .416 caliber (10.57 mm) cartridge of belted bottlenecked design. The cartridge was intended as a dangerous game hunting cartridge and released to the public in 1989. The cartridge uses the case of the 8 mm Remington Magnum as a parent cartridge. When the cartridge was released in 1988, author Frank C. Barnes considered the .416 Remington Magnum to be the "most outstanding factory cartridge introduced in decades".

The 8×64mm S is a rimless bottlenecked centerfire cartridge developed as a military service round for the German Army who never issued it. As is customary in European cartridges the 8 denotes the 8 mm bullet caliber and the 64 denotes the 64 mm (2.52 in) case length.

<span class="mw-page-title-main">.325 Winchester Short Magnum</span> Rifle cartridge

The .325 Winchester Short Magnum, commonly known as the 325 WSM, is an 8mm caliber rebated rim bottlenecked centerfire short magnum medium bore cartridge. The cartridge was introduced by Winchester Ammunition in 2005.

<span class="mw-page-title-main">.30-06 Springfield wildcat cartridges</span> Non-standard rifle cartridge

.30-06 Springfield wildcat cartridges are cartridges developed from a 30-06 Springfield "parent cartridge" through narrowing or widening the cartridge neck to fit a smaller or larger bullet in an attempt to improve performance in specific areas. Such wildcat cartridges are not standardized with recognized small arms standardization bodies like the SAAMI and the CIP.

<span class="mw-page-title-main">6.5mm Remington Magnum</span> US rifle cartridge

The 6.5mm Remington Magnum is a .264 caliber (6.7 mm) belted bottlenecked cartridge introduced in 1966. The cartridge is based on a necked down .350 Remington Magnum which on turn is based on a shortened, necked down, blown out .375 H&H Magnum case. The cartridge was one of the first short magnum cartridges.

References

  1. 1 2 ".284 Winchester data" from Accurate Powder Archived 2006-07-18 at the Wayback Machine
  2. ↑ 7mm Accuracy Cartridges - .284 Winchester at www.accurateshooter.com
  3. ↑ C.I.P. decisions, texts and tables free current C.I.P. CD-ROM version download (ZIP and RAR format) Archived 2008-09-29 at the Wayback Machine
  4. 1 2 The .284 Winchester by Chuck Hawks
  5. ↑ What's Wrong With .30 Caliber? By Bryan Litz
  6. 1 2 NOLASCO C.I.P. TDCC datasheet 30-284 NOLASCO
  7. ↑ - 284 Win. C.I.P. TDCC datasheet 30 - 284 Win.
  8. ↑ McPherson, M.L. "Wildcatting the .284 Winchester Long-range shooters and wildcatters have kept the .284 alive". Rifle Shooter Magazine. Archived from the original on 2008-01-10. Retrieved 2008-01-13.
  9. ↑ ".284 Winchester".
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.