Direct borohydride fuel cell

Last updated

Direct borohydride fuel cells (DBFCs) are a subcategory of alkaline fuel cells which are directly fed by sodium borohydride or potassium borohydride as a fuel and either air/oxygen [1] or hydrogen peroxide [2] as the oxidant. DBFCs are relatively new types of fuel cells which are currently in the developmental stage and are attractive due to their high operating potential in relation to other type of fuel cells. Recently, DBFCs that rival proton-exchange membrane fuel cells (PEMFCs) in peak power but operating at double the voltage have been reported. [3]

Contents

Chemistry

Sodium borohydride has been used [4] with more conventional hydrogen fuel cell systems as a means of storing hydrogen. The hydrogen can be regenerated for a fuel cell by catalytic decomposition of the borohydride with water, including successful hydration with synthetic urine:

NaBH4 + 2H2O → NaBO2 + 4H2

Direct borohydride fuel cells decompose and oxidize the borohydride directly, side-stepping hydrogen production and even producing slightly higher energy yields: [5]

Cathode: 2O2 + 4H2O + 8e− → 8OH− (E0 = +0.4V)
Anode: NaBH4 + 8OH− → NaBO2 + 6H2O + 8e− (E0 = -1.24 V)
Total E0 = +1.64V

The simplified reaction is:

NaBH4 + 2O2 → NaBO2 + 2H2O + Electricity

The working temperature of a direct sodium borohydride fuel cell is 70 °C (158 °F).

Advantages

DBFCs could be produced more cheaply than a traditional fuel cell because they do not need expensive platinum catalysts. In addition, they have a higher power density. The high operating voltage of a DBFC reduces the number of cells (in a series circuit) needed in a stack to achieve a desired rated voltage and thus reduces the stack costs considerably. [3]

Disadvantages

Unfortunately, DBFCs do produce some hydrogen from a side reaction of NaBH4 with water heated by the fuel cell. This hydrogen can either be piped out to the exhaust or piped to a conventional hydrogen fuel cell. Either fuel cell will produce water, and the water can be recycled to allow for higher concentrations of NaBH4.

More importantly, the process of creating electricity via a DBFC is not easily reversible. For example, after sodium borohydride (NaBH4) has released its hydrogen and has been oxidized, the product is NaBO2 (sodium metaborate). Sodium metaborate might be hydrogenated back into sodium borohydride fuel by several different techniques, some of which might theoretically require nothing more than water and electricity or heat. However, these techniques are still in active development. As of June 30, 2010, many patents claiming to effectively achieve the conversion of sodium metaborate to sodium borohydride have been investigated but none have been confirmed—the current efficiency of "boron hydride recycling" seems to be well below 1% which is unsuitable for recharging a vehicle. [6]

Cost

Mass production projected prices for the fuel are as low as US$5/kg, rivalling the cost of hydrocarbon fuels. [7]

See also

Related Research Articles

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity."

<span class="mw-page-title-main">Redox</span> Chemical reaction in which oxidation states of atoms are changed

Redox is a type of chemical reaction in which the oxidation states of a reactant change and that reduction and oxidation occur at the same time in a reaction. Oxidation is the loss of electrons or an increase in the oxidation state, while reduction is the gain of electrons or a decrease in the oxidation state.

<span class="mw-page-title-main">Hydride</span> Molecule with a hydrogen bound to a more electropositive element or group

In chemistry, a hydride is formally the anion of hydrogen (H−), a hydrogen atom with two electrons. The term is applied loosely. At one extreme, all compounds containing covalently bound H atoms are also called hydrides: water (H2O) is a hydride of oxygen, ammonia is a hydride of nitrogen, etc. For inorganic chemists, hydrides refer to compounds and ions in which hydrogen is covalently attached to a less electronegative element. In such cases, the H centre has nucleophilic character, which contrasts with the protic character of acids. The hydride anion is very rarely observed.

In chemistry, a reducing agent is a chemical species that "donates" an electron to an electron recipient.

<span class="mw-page-title-main">Diborane</span> Chemical compound

Diborane(6), commonly known as diborane, is the chemical compound with the formula B2H6. It is a toxic, colorless, and pyrophoric gas with a repulsively sweet odor. Given its simple formula, borane is a fundamental boron compound. It has attracted wide attention for its electronic structure. Several of its derivatives are useful reagents.

<span class="mw-page-title-main">Sodium borohydride</span> Chemical compound

Sodium borohydride, also known as sodium tetrahydridoborate and sodium tetrahydroborate, is an inorganic compound with the formula NaBH4. It is a white crystalline solid, usually encountered as an aqueous basic solution. Sodium borohydride is a reducing agent that finds application in papermaking and dye industries. It is also used as a reagent in organic synthesis.

<span class="mw-page-title-main">Sodium molybdate</span> Chemical compound

Sodium molybdate, Na2MoO4, is useful as a source of molybdenum. This white, crystalline salt is often encountered as the dihydrate, Na2MoO4·2H2O.

<span class="mw-page-title-main">Dithionite</span> Anion

The dithionite is the oxyanion with the formula [S2O4]2−. It is commonly encountered as the salt sodium dithionite. For historical reasons, it is sometimes called hydrosulfite, but it contains no hydrogen and is not a sulfite. The dianion has a steric number of 4 and trigonal pyramidal geometry.

<span class="mw-page-title-main">Borohydride</span>

Borohydride refers to the anion [BH4]−, which is also called tetrahydridoborate, and its salts. Borohydride or hydroborate is also the term used for compounds containing [BH4−nXn]−, where n is an integer from 0 to 3, for example cyanoborohydride or cyanotrihydroborate [BH3(CN)]− and triethylborohydride or triethylhydroborate [BH(CH2CH3)3]−. Borohydrides find wide use as reducing agents in organic synthesis. The most important borohydrides are lithium borohydride and sodium borohydride, but other salts are well known. Tetrahydroborates are also of academic and industrial interest in inorganic chemistry.

<span class="mw-page-title-main">Lithium borohydride</span> Chemical compound

Lithium borohydride (LiBH4) is a borohydride and known in organic synthesis as a reducing agent for esters. Although less common than the related sodium borohydride, the lithium salt offers some advantages, being a stronger reducing agent and highly soluble in ethers, whilst remaining safer to handle than lithium aluminium hydride.

The Chrysler Natrium is a hybrid fuel cell-type hydrogen vehicle based on the Chrysler Town and Country. It was showcased by Chrysler in 2001.

<span class="mw-page-title-main">Oxygen compounds</span> Different oxidation states of Oxygen

The oxidation state of oxygen is −2 in almost all known compounds of oxygen. The oxidation state −1 is found in a few compounds such as peroxides. Compounds containing oxygen in other oxidation states are very uncommon: −1⁄2 (superoxides), −1⁄3 (ozonides), 0, +1⁄2 (dioxygenyl), +1, and +2.

<span class="mw-page-title-main">Sodium metaborate</span> Chemical compound

Sodium metaborate is a chemical compound of sodium, boron, and oxygen with formula NaBO2. However, the metaborate ion is trimeric in the anhydrous solid, therefore a more correct formula is Na3B3O6 or (Na+)3[B3O6]3−. The formula can be written also as Na2O·B2O3 to highlight the relation to the main oxides of sodium and boron. The name is also applied to several hydrates whose formulas can be written NaBO2·nH2O for various values of n.

The Glossary of fuel cell terms lists the definitions of many terms used within the fuel cell industry. The terms in this fuel cell glossary may be used by fuel cell industry associations, in education material and fuel cell codes and standards to name but a few.

<span class="mw-page-title-main">Carbonyl reduction</span> Organic reduction of any carbonyl group by a reducing agent

In organic chemistry, carbonyl reduction is the conversion of any carbonyl group, usually to an alcohol. It is a common transformation that is practiced in many ways. Ketones, aldehydes, carboxylic acids, esters, amides, and acid halides - some of the most pervasive functional groups, -comprise carbonyl compounds. Carboxylic acids, esters, and acid halides can be reduced to either aldehydes or a step further to primary alcohols, depending on the strength of the reducing agent. Aldehydes and ketones can be reduced respectively to primary and secondary alcohols. In deoxygenation, the alcohol group can be further reduced and removed altogether by replacement with H.

<span class="mw-page-title-main">Alkaline anion-exchange membrane fuel cell</span>

An alkaline anion-exchange membrane fuel cell (AAEMFC), also known as anion-exchange membrane fuel cells (AEMFCs), alkaline membrane fuel cells (AMFCs), hydroxide-exchange membrane fuel cells (HEMFCs), or solid alkaline fuel cells (SAFCs) is a type of alkaline fuel cell that uses an anion-exchange membrane to separate the anode and cathode compartments.

Nickel boride is the common name of materials composed chiefly of the elements nickel and boron that are widely used as catalysts in organic chemistry. Their approximate chemical composition is Ni2.5B, and they are often incorrectly denoted "Ni
2B" in organic chemistry publications.

A mixed oxidant solution (MOS) is a type of disinfectant that has many uses including disinfecting, sterilizing, and eliminating pathogenic microorganisms in water. An MOS may have advantages such as a higher disinfecting power, stable residual chlorine in water, elimination of biofilm, and safety. The main components of an MOS are chlorine and its derivatives, which are produced by electrolysis of sodium chloride. It may also contain high amounts of hydroxy radicals, chlorine dioxide, dissolved ozone, hydrogen peroxide and oxygen from which the name "mixed oxidant" is derived.

Trisodium borate is a chemical compound of sodium, boron, and oxygen, with formula Na3BO3, or (Na+)3[BO3]3−. It is a sodium salt of the orthoboric acid B(OH)3.

<span class="mw-page-title-main">Sodium tetrahydroxyborate</span> Chemical compound

Sodium tetrahydroxyborate is a salt of with chemical formula NaH4BO4 or Na+[B(OH)4]−. It is one of several sodium borates. At room temperature it is a colorless crystalline solid.

References

  1. ↑ Amendola S.C., Onnerud P., Kelly M., Petillo P., Sharp-Goldman S. L and Binder M. (1999) ‘A novel high power density borohydride-air cell’, J. Power Sources, 84, pp. 130–133.
  2. ↑ Choudhury, N.A.; Raman, R.K.; Sampath, S.; Shukla, A.K. An alkaline direct borohydride fuel cell with hydrogen peroxide as oxidant. J. Power Sources 2005, 143, 1-8.
  3. 1 2 Wang, Zhongyang; Parrondo, Javier; He, Cheng; Sankarasubramanian, Shrihari; Ramani, Vijay (April 2019). "Efficient pH-gradient-enabled microscale bipolar interfaces in direct borohydride fuel cells". Nature Energy. 4 (4): 281–289. Bibcode:2019NatEn...4..281W. doi:10.1038/s41560-019-0330-5. ISSN   2058-7546. S2CID   139154235.
  4. ↑ [https://web.archive.org/web/20240525141543/https://apps.dtic.mil/sti/tr/pdf/ADA481395.pdf Advanced Chemical Hydride-Based Fuel Cell Systems For Portable Military Applications, Protonex Technology Corporation (2006)]
  5. ↑ Ma, Choudhury, Sahai - A comprehensive review of direct borohydride fuel cells
  6. ↑ Final Report: Electrochemical Hydrogen Storage Systems, MacDonald 2010
  7. ↑ Suzanne w. Linehan; Arthur a. Chin; Nathan t. Allen; Robert Butterick; Nathan t. Kendall; i. Leo Klawiter; Francis j. Lipiecki; Dean m. Millar; David c. Molzahn; Samuel j. November; Puja Jain; Sara Nadeau; Scott Mancroni (2010). "Low-Cost Precursors to Novel Hydrogen Storage Materials". doi:10.2172/1022594. OSTI   1022594.{{cite journal}}: Cite journal requires |journal= (help)
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.