Dollar (reactivity)

Last updated

A dollar is a unit of reactivity for a nuclear reactor, calibrated to the interval between the conditions of criticality and prompt criticality. Prompt criticality will result in an extremely rapid power rise, with the resultant destruction of the reactor, unless it is specifically designed to tolerate the condition. A cent is 1⁄100 of a dollar.

Contents

Meaning and use

Each nuclear fission produces several neutrons that can be absorbed, escape from the reactor, or go on to cause more fissions in a chain reaction. When an average of one neutron from each fission goes on to cause another fission, the reactor is just barely "critical" and the chain reaction proceeds at a constant power level.

Most neutrons produced in fission are "prompt", i.e., created with the fission products in less than about 10 nanoseconds (a "shake" of time), but certain fission products produce additional neutrons when they decay up to several minutes after their creation by fission. These delayed-release neutrons, a few percent of the total, are key to stable nuclear reactor control. Without delayed neutrons, in a reactor that was just barely above critical, reactor power would increase exponentially on millisecond or even microsecond timescales – much too fast to be controlled with current or near-future technology. Such a rapid power increase can also happen in a real reactor when the chain reaction is sustained without the help of the delayed neutrons. This is prompt criticality, the most extreme example of which is an exploding nuclear weapon where considerable design effort goes into keeping the core deep into prompt criticality for as long as possible until the greatest attainable percentage of material has fissioned. [1]

By definition, a reactivity of zero dollars is just barely on the edge of criticality using both prompt and delayed neutrons. A reactivity less than zero dollars is subcritical; the power level will decrease exponentially and a sustained chain reaction will not occur. One dollar is defined as the threshold between delayed and prompt criticality. At prompt criticality, on average each fission will cause exactly one additional fission via prompt neutrons, and the delayed neutrons will then increase power. Any reactivity above $0 is supercritical and power will increase exponentially, but between $0 and $1 the power rise will be slow enough to be easily and safely controlled with mechanical control rods because the chain reaction partly depends on the delayed neutrons. A power reactor operating at steady state (constant power) will therefore have an average reactivity of $0, with small fluctuations above and below this value. [2]

Reactivity can also be expressed in relative terms, such as "5 cents above prompt critical". [3]

While power reactors are carefully designed and operated to avoid prompt criticality under all circumstances, many small research or "zero power" reactors are designed to be intentionally placed into prompt criticality (reactivity > $1) with complete safety by rapidly withdrawing their control rods. Their fuel elements are designed so that as they heat up, reactivity is automatically and quickly reduced through effects such as doppler broadening and thermal expansion. Such reactors can be "pulsed" to very high power levels (e.g., several GW) for a few milliseconds, after which reactivity automatically drops to $0 and a relatively low and constant power level (e.g. several hundred kW) is maintained until shut down manually by reinserting the control rods. [4]

Subcritical reactors, which thus far have only been built at laboratory scale, would constantly run in "negative dollars" (most likely a few cents below [delayed] critical) with the "missing" neutrons provided by an external neutron source, e.g. spallation driven by a particle accelerator in an accelerator-driven subcritical reactor.

History

According to Alvin Weinberg and Eugene Wigner, Louis Slotin was the first to propose the name "dollar" for the interval of reactivity between barely critical and prompt criticality, and "cents" for the decimal fraction of the dollar. [5]

Related Research Articles

<span class="mw-page-title-main">Nuclear fission</span> Nuclear reaction splitting an atom into multiple parts

Nuclear fission is a reaction in which the nucleus of an atom splits into two or more smaller nuclei. The fission process often produces gamma photons, and releases a very large amount of energy even by the energetic standards of radioactive decay.

<span class="mw-page-title-main">Nuclear chain reaction</span> When one nuclear reaction causes more

In nuclear physics, a nuclear chain reaction occurs when one single nuclear reaction causes an average of one or more subsequent nuclear reactions, thus leading to the possibility of a self-propagating series or "positive feedback loop" of these reactions. The specific nuclear reaction may be the fission of heavy isotopes. A nuclear chain reaction releases several million times more energy per reaction than any chemical reaction.

<span class="mw-page-title-main">Nuclear reactor</span> Device used to initiate and control a nuclear chain reaction

A nuclear reactor is a device used to initiate and control a fission nuclear chain reaction or nuclear fusion reactions. Nuclear reactors are used at nuclear power plants for electricity generation and in nuclear marine propulsion. Heat from nuclear fission is passed to a working fluid, which in turn runs through steam turbines. These either drive a ship's propellers or turn electrical generators' shafts. Nuclear generated steam in principle can be used for industrial process heat or for district heating. Some reactors are used to produce isotopes for medical and industrial use, or for production of weapons-grade plutonium. As of 2022, the International Atomic Energy Agency reports there are 422 nuclear power reactors and 223 nuclear research reactors in operation around the world.

<span class="mw-page-title-main">Critical mass</span> Smallest amount of fissile material needed to sustain a nuclear reaction

In nuclear engineering, a critical mass is the smallest amount of fissile material needed for a sustained nuclear chain reaction. The critical mass of a fissionable material depends upon its nuclear properties, density, shape, enrichment, purity, temperature, and surroundings. The concept is important in nuclear weapon design.

<span class="mw-page-title-main">Scram</span> Emergency shutdown of a nuclear reactor

A scram or SCRAM is an emergency shutdown of a nuclear reactor effected by immediately terminating the fission reaction. It is also the name that is given to the manually operated kill switch that initiates the shutdown. In commercial reactor operations, this type of shutdown is often referred to as a "scram" at boiling water reactors (BWR), a "reactor trip" at pressurized water reactors and EPIS at a CANDU reactor. In many cases, a scram is part of the routine shutdown procedure, which serves to test the emergency shutdown system.

<span class="mw-page-title-main">Control rod</span> Device used to regulate the power of a nuclear reactor

Control rods are used in nuclear reactors to control the rate of fission of the nuclear fuel – uranium or plutonium. Their compositions include chemical elements such as boron, cadmium, silver, hafnium, or indium, that are capable of absorbing many neutrons without themselves decaying. These elements have different neutron capture cross sections for neutrons of various energies. Boiling water reactors (BWR), pressurized water reactors (PWR), and heavy-water reactors (HWR) operate with thermal neutrons, while breeder reactors operate with fast neutrons. Each reactor design can use different control rod materials based on the energy spectrum of its neutrons. Control rods have been used in nuclear aircraft engines like Project Pluto as a method of control.

In nuclear physics, an energy amplifier is a novel type of nuclear power reactor, a subcritical reactor, in which an energetic particle beam is used to stimulate a reaction, which in turn releases enough energy to power the particle accelerator and leave an energy profit for power generation. The concept has more recently been referred to as an accelerator-driven system (ADS) or accelerator-driven sub-critical reactor.

A criticality accident is an accidental uncontrolled nuclear fission chain reaction. It is sometimes referred to as a critical excursion, critical power excursion, divergent chain reaction, or simply critical. Any such event involves the unintended accumulation or arrangement of a critical mass of fissile material, for example enriched uranium or plutonium. Criticality accidents can release potentially fatal radiation doses if they occur in an unprotected environment.

<span class="mw-page-title-main">Chicago Pile-1</span> Worlds first human-made nuclear reactor

Chicago Pile-1 (CP-1) was the world's first artificial nuclear reactor. On 2 December 1942, the first human-made self-sustaining nuclear chain reaction was initiated in CP-1 during an experiment led by Enrico Fermi. The secret development of the reactor was the first major technical achievement for the Manhattan Project, the Allied effort to create nuclear weapons during World War II. Developed by the Metallurgical Laboratory at the University of Chicago, CP-1 was built under the west viewing stands of the original Stagg Field. Although the project's civilian and military leaders had misgivings about the possibility of a disastrous runaway reaction, they trusted Fermi's safety calculations and decided they could carry out the experiment in a densely populated area. Fermi described the reactor as "a crude pile of black bricks and wooden timbers".

<span class="mw-page-title-main">Light-water reactor</span> Type of nuclear reactor that uses normal water

The light-water reactor (LWR) is a type of thermal-neutron reactor that uses normal water, as opposed to heavy water, as both its coolant and neutron moderator; furthermore a solid form of fissile elements is used as fuel. Thermal-neutron reactors are the most common type of nuclear reactor, and light-water reactors are the most common type of thermal-neutron reactor.

In nuclear engineering, prompt criticality describes a nuclear fission event in which criticality is achieved with prompt neutrons alone and does not rely on delayed neutrons. As a result, prompt supercriticality causes a much more rapid growth in the rate of energy release than other forms of criticality. Nuclear weapons are based on prompt criticality, while nuclear reactors rely on delayed neutrons or external neutrons to achieve criticality.

A subcritical reactor is a nuclear fission reactor concept that produces fission without achieving criticality. Instead of sustaining a chain reaction, a subcritical reactor uses additional neutrons from an outside source. There are two general classes of such devices. One uses neutrons provided by a nuclear fusion machine, a concept known as a fusion–fission hybrid. The other uses neutrons created through spallation of heavy nuclei by charged particles such as protons accelerated by a particle accelerator, a concept known as an accelerator-driven system (ADS) or accelerator-driven sub-critical reactor.

In nuclear engineering, a prompt neutron is a neutron immediately emitted by a nuclear fission event, as opposed to a delayed neutron decay which can occur within the same context, emitted after beta decay of one of the fission products anytime from a few milliseconds to a few minutes later.

In nuclear engineering, a delayed neutron is a neutron emitted after a nuclear fission event, by one of the fission products, any time from a few milliseconds to a few minutes after the fission event. Neutrons born within 10−14 seconds of the fission are termed "prompt neutrons".

Neutron economy is defined as the ratio of excess neutron production divided by the rate of fission. The numbers are a weighted average based primarily on the energies of the neutrons.

<span class="mw-page-title-main">Nuclear reactor physics</span> Field of physics dealing with nuclear reactors

Nuclear reactor physics is the field of physics that studies and deals with the applied study and engineering applications of chain reaction to induce a controlled rate of fission in a nuclear reactor for the production of energy. Most nuclear reactors use a chain reaction to induce a controlled rate of nuclear fission in fissile material, releasing both energy and free neutrons. A reactor consists of an assembly of nuclear fuel, usually surrounded by a neutron moderator such as regular water, heavy water, graphite, or zirconium hydride, and fitted with mechanisms such as control rods which control the rate of the reaction.

In applications such as nuclear reactors, a neutron poison is a substance with a large neutron absorption cross-section. In such applications, absorbing neutrons is normally an undesirable effect. However, neutron-absorbing materials, also called poisons, are intentionally inserted into some types of reactors in order to lower the high reactivity of their initial fresh fuel load. Some of these poisons deplete as they absorb neutrons during reactor operation, while others remain relatively constant.

Shutdown is the state of a nuclear reactor when the fission reaction is slowed significantly or halted completely. Different nuclear reactor designs have different definitions for what "shutdown" means, but it typically means that the reactor is not producing a measurable amount of electricity or heat, and is in a stable condition with very low reactivity.

Hybrid nuclear fusion–fission is a proposed means of generating power by use of a combination of nuclear fusion and fission processes.

Startup neutron source is a neutron source used for stable and reliable initiation of nuclear chain reaction in nuclear reactors, when they are loaded with fresh nuclear fuel, whose neutron flux from spontaneous fission is insufficient for a reliable startup, or after prolonged shutdown periods. Neutron sources ensure a constant minimal population of neutrons in the reactor core, sufficient for a smooth startup. Without them, the reactor could suffer fast power excursions during startup from state with too few self-generated neutrons.

References

  1. ↑ Hugh C. Paxton: A History of Critical Experiments at Pajarito Site. Los Alamos Document LA-9685-H, 1983.
  2. ↑ "Reactivity". nuclear-power.net. n.d. Retrieved 7 July 2021.
  3. ↑ McLaughlin, Thomas P.; et al. (2000). A Review of Criticality Accidents (PDF). Los Alamos: Los Alamos National Laboratory. p. 75. LA-13638. Retrieved 5 November 2012.
  4. ↑ "WSU Reactor Pulsing to 1.2GW (January 2007)". YouTube. 20 February 2012. Retrieved 7 July 2021.
  5. ↑ Weinberg, Alvin M.; Wigner, Eugene P. (1958). The Physical Theory of Neutron Chain Reactors. Chicago: University of Chicago Press. p. 595.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.