SB Decima

Last updated

SB Decima
David Leal and the SB Decima at Dartford Lock 8748.jpg
David Leal and the SB Decima at Dartford Lock 2018
History
Civil Ensign of the United Kingdom.svgUnited Kingdom
NameDecima
Owner
  • E. J. Goldsmith of Grays (1899-1949)
  • Rayfield's of Gravesend (1949-1960s)
  • Greenhithe Lighterage Co, (Tester Bros) motor barge (1960s-1977)
  • Berty (Dennis) Wildish, auxiliary barge (1977-1996)
  • Jeremy Taunton, houseboat, Faversham (1996-2003)
  • Tim Goldsack (2003-2016)
  • David Leal (2016- )
Ordered1897
BuilderF. G. Fay & Co, Southampton, England
Launched1899
Identification
  • Official Number 110055
  • National historic ship 1984
StatusSailing
General characteristics
Class and typeThames sailing barge
Tons burthen67
Length85 ft (26 m)
Beam19.6 ft (6.0 m)
Draught3 ft (0.91 m)approx
PropulsionSail (1899-1949)
Sail plansprit mainsail, topsail, mizzen
Complement2

SB Decima is a steel Thames sailing barge constructed in Southampton in 1899 by J.G. Fay and Co, Southampton for E. J. Goldsmith of Grays, Essex. She is back under sail and resident on the River Darent in Dartford, Kent. [1] She is a notable "Historic Ship". [2]

Contents

History

SB Decima at Dartford Lock 8735.jpg

The ubiquitous Thames sailing barge had evolved over a century from the small swim-headed wooden river lighter, to the efficient river and estuary vessel with a rounded bow and stem post, that would take cargoes of up to 200 tons and regularly race to test design changes. The farmer sailed vessel used on short runs on the upper reaches of the London River had been eclipsed by the hoy companies running mixed cargoes from Margate and Ipswich to the west of London, and indeed doing occasional coastal work as far as the Tyne and the Lizard.[ citation needed ]

These companies owned not one but many of the wooden barges and were commissioning barges made of iron and steel. One of the largest of these companies was Goldsmiths of Grays in Essex, a company that owned 147 barges in 1905s against the fleet of 120 run by the London and Rochester Trading Company in the 1930s. [3] A.P.C.M. was a collection of the fleets of cement firms and they had over 300.[ citation needed ]

In 1898 they commissioned twenty-two 160 tonners 'iron-pots' from Braby in Deptford and Fay and Co in Southampton. Braby barges had square chines which enhanced their windward performance at the expense of off the wind, all the Fay barges were all built to a similar design with rounded chines. The rounded chine led to dismal performance to windward and a heavy dependency on the leeboards. [4] The SB Decima was built to this design by Fay and Co.

As a steel ship, skippers could push her hard without fear of busting the caulking, but the ironpots were built for steady not spectacular progress. At sea they could be recognised by an undersized topsail. The barges were 'seekers' but the skippers, as Goldsmith's employers they had less freedom on which cargoes to accept and the route, that was done by the office. Goldsmith were described by Benham as ´the Pickfords of the North Sea'. [5]

She was involved in the great 70-mile-an-hour gale of 23 November 1938 when nine barges sought assistance from lifeboats along the Suffolk coast. [6] [7] The lifeboat took off her crew, and she made her own way to safety on a beach in Holland. She was sunk herself in 1940 when a deck cargo of timber broke free off Southend pier. She was recovered and resumed trading. [8]

She was sold in 1949, and became a motor barge. Her rigging was stripped away and she continued trading. She took her last cargo in 1977: scrap metal to Queenborough.

Restoration

The Decima at the highest navigable wharf on the River Darent SB Decima at Dartford Lock 8729.jpg
The Decima at the highest navigable wharf on the River Darent

Out of trade she was first sold to her last skipper, Beefy Wildish who re-rigged her as a charter barge with sails and motor. In 1999 she was sold to Jeremy Taunton for use as a houseboat. The well-known sailing barge restorer and shipwright Tim Goldsack, bought Decima in 2003. He completed a major restoration. She was gutted and a substantial number of the hull and deck plates were replaced. She was given a new set of rigging and good second-hand sails. A new Gardner 6LXB engine was fitted. She was sailing again in 2004. [8]

Decima was sponsored by the jam maker, Wilkin & Sons of Tiptree, Essex in 2010, and their logo was displayed prominently on the topsail. [8]

She was sold by Tim Goldsack to David Leal in 2016. [8]

In 2018 she passed along the Dartford Creek to above Dartford lock. [9]

Rig and construction

The sails on a typical Thames sailing barge from 1900 Sail names on Thames sailing barge (en).svg
The sails on a typical Thames sailing barge from 1900

The hull of a keel-less Thames barge was always a compromise between the cargo carrying capacity, and her sailing properties. Swim-head lighters could pack in the grain, but not sail competitively in rough water, let alone in lower reaches of the river, or on the estuary. Decima was built to work the estuary and do runs along and across the English Channel and the North Sea, she was built to an established specification and a design decision was made that should have a rounded chine and put greater use to her leeboards. Her hull was constructed of steel and was 85 feet (26 m) long, and 20 feet 6 inches (6.25 m) wide.

Thames barges could be rigged in many ways, and in her life she has been rigged with a loosefooted sprit-sail twice, in between acting as a motor barge. An indication of the original spars and sails can be surmised from E H March's detailed measurement of the SB Kathleen, [10] a wooden barge doing similar work that was launched 3 years later. This is supported by a 1909 dated sailplan in Goldfinch's of Whitstable sailbook. [11] In contrast, we have some details of the Jewish, that was built in 1899 in Barking then renamed as the HKD (official number 110075). She was a 65-ton, 88 feet (27 m) by 21 feet (6.4 m) vessel.

Spars

On the Kathleen, the mainmast was 35 feet (11 m) heel to hounds, 40 feet (12 m) heel to head, the topmast was 39 feet 6 inches (12.04 m) to hounds, 44 feet (13 m) to cap with a 9 feet (2.7 m) headstick. The sprit was 17 feet (5.2 m). The mizzen was 24 feet (7.3 m) with a 40 feet (12 m) sprit, and a 14 feet (4.3 m) boom. Her bowsprit was 22 feet 6 inches (6.86 m) with 18 feet (5.5 m) outboard. [12]

On the HKD, the mainmast was 38 feet 6 inches (11.73 m) heel to hounds, 46 feet 6 inches (14.17 m) heel to head, the topmast was 40 feet (12 m) heel to hounds, 4 feet 6 inches (1.37 m) pole with a 10 feet (3.0 m) headstick. The sprit was 58 feet (18 m). The mizzen was 17 feet (5.2 m) with a 26 feet (7.9 m) sprit, and a 15 feet (4.6 m) boom. Her bowsprit was 26 feet (7.9 m) outboard. [13]

Sails

On the Kathleen, the mainsail was 27 feet 3 inches (8.31 m) (weather), by 34 feet 6 inches (10.52 m)(head) with a lee of 49 feet 0 inches (14.94 m) and a of foot 35 feet 6 inches (10.82 m), giving a sail area of 285 square yards (238 m2). [12]

The topsail was 34 feet (10 m) (weather), with a lee of 34 feet (10 m) and a of foot 31 feet (9.4 m), giving a sail area of 128 square yards (107 m2). [12]

The foresail was 31 feet (9.4 m) (weather), with a lee of 30 feet (9.1 m) and a of foot 26 feet (7.9 m), giving a sail area of 91+1/2 square yards (76.5 m2). [12]

The jib was 42 feet (13 m) (weather), with a lee of 28 feet (8.5 m) and a foot of 18 feet 4 inches (5.59 m). [12] Her jib topsails were 48 feet (15 m) (weather), with a lee of 33 feet (10 m) and a foot of 21 feet (6.4 m), giving a sail area of 55 square yards (46 m2), and a lighter set with 56 feet (17 m) (weather), with a lee of 38 feet (12 m) and a of foot 24 feet 6 inches (7.47 m), giving a sail area of 72 square yards (60 m2). [12]

Her mizzen was 13 feet 6 inches (4.11 m) (weather), by 12 feet 0 inches (3.66 m)(head) with a lee of 23 feet 6 inches (7.16 m) and a of foot 13 feet 6 inches (4.11 m) giving a sail area of 41+1/2 square yards (34.7 m2). [12]

On the HKD the sail measurements were roughly similar. She carried 713 square yards (596 m2) of canvas in total.[ citation needed ]

The sails on a Thames barge are red ochre in colour. The sailcloth is of flax, and to be kept in a supple and waterproof condition it must be dressed. Importantly, the flax must not dry out or will chafe against the rigging or against the rails when not in use. The sailmaker's exact formula is a closely guarded secret, and sailormen believe that some dressings are faster than others. It is based on red-ochre (protects against UV) suspended in a mixture of fish oils, linseed oil, seawater and horse urine. [14] The HKD required 32 imperial gallons (150 L) of sail dressing annually. [15]

See also

Related Research Articles

<span class="mw-page-title-main">Scow</span> Type of flat-bottomed barge

A scow is a smaller type of barge. Some scows are rigged as sailing scows. In the 19th and early 20th centuries, scows carried cargo in coastal waters and inland waterways, having an advantage for navigating shallow water or small harbours. Scows were in common use in the American Great Lakes and other parts of the U.S., Canada, southern England, and New Zealand. In modern times their main purpose is for recreation and racing; there are also garbage scows for aquatic transport of refuse.

<span class="mw-page-title-main">Cutter (boat)</span> Type of boat

A cutter is a name for various types of watercraft. It can apply to the rig of a sailing vessel, to a governmental enforcement agency vessel, to a type of ship's boat which can be used under sail or oars, or, historically, to a type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships.

<span class="mw-page-title-main">Gaff rig</span> Sailing rig configuration

Gaff rig is a sailing rig in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the gaff. Because of the size and shape of the sail, a gaff rig will have running backstays rather than permanent backstays.

<span class="mw-page-title-main">Thames sailing barge</span> Type of commercial sailing boat

A Thames sailing barge is a type of commercial sailing boat once common on the River Thames in London. The flat-bottomed barges, with a shallow draught and leeboards, were perfectly adapted to the Thames Estuary, with its shallow waters and narrow tributary rivers. The larger barges were seaworthy vessels, and were the largest sailing vessel to be handled by just two men. The average size was about 120 tons and they carried 4,200 square feet (390 m2) of canvas sail in six working sails. The mainsail was loose-footed and set up with a sprit, and was brailed to the mast when not needed. It is sheeted to a horse, as is the foresail; they require no attention when tacking. The foresail is often held back by the mate to help the vessel come about more swiftly.

<span class="mw-page-title-main">Spritsail</span>

The spritsail is a four-sided, fore-and-aft sail that is supported at its highest points by the mast and a diagonally running spar known as the sprit. The foot of the sail can be stretched by a boom or held loose-footed just by its sheets. A spritsail has four corners: the throat, peak, clew, and tack. The Spritsail can also be used to describe a rig that uses a spritsail.

<i>Thalatta</i> (Thames barge) Thames sailing barge

Thalatta is a Thames sailing barge, built in Harwich, Essex, in 1906 and rebuilt in St Osyth in 2012. She is 90 feet (27 m) long and 26 feet (7.9 m) across the widest part of the deck. Like all Thames barges, she is flat-bottomed and has leeboards instead of a keel. She spent some of her life ketch-rigged and some of it spritsail-rigged. She is now permanently spritsail rigged, and has a mainmast and topmast that, together, are about 90 feet (27 m) high, and a mizzen mast. Thalatta has had two periods with an auxiliary engine and two without. She carried cargo for sixty years and was then converted for use as a sail training ship in 1966. She was completely rebuilt between 2006 and 2012 at St Osyth with assistance from lottery funds.

<i>Will</i> (Thames barge)

Will is a Thames sailing barge, built in Great Yarmouth by Fellows & Co in 1925. She is 97.6 ft (29.75 m) long, 23.1 ft (7.04 m) across and 9.6 ft (2.93 m) deep. Will Everard, as she was originally known, was commissioned as one of four steel barges; the largest ever built. She is a mulie, with a spritsail rigged mainmast, a topmast and a gaff-rigged mizzen. She has a flat bottom with leeboards as is customary for Thames sailing barges. As one of the last sailing cargo vessels to operate in UK waters she left trade in 1966. After a few years lying derelict, she was refitted and eventually entered into the service of P&O where she was used as a floating board room until 1999. This role in corporate hospitality continued and she now is fully engaged in private charter work. She currently operates out of the Pool of London from a base at Hermitage Community Moorings, Reeds Wharf and St Katherine Docks for cruises through London, the east coast and beyond.

SB <i>Centaur</i> British wooden Thames sailing barge

SB Centaur is a wooden Thames sailing barge, built in Harwich, Essex, England in 1895. She was used to carry various cargoes, mainly grain, for the next 60 years. During the First World War she carried food and coal to the French Channel ports. During the Second World War Centaur was damaged when sailing to assist with the Dunkirk Evacuation. She did war work for the duration of the conflict.

SB <i>Pudge</i> Wooden sailing barge, Dunkirk little ship

SB Pudge is a wooden Thames sailing barge, built in Rochester, Kent, England in 1922. Her hull was pitch pine on oak frame. She was originally spritsail rigged with bowsprit. An auxiliary oil engine made by The Bergius Co.Ltd of Glasgow was installed in 1932. She was used to carry various cargoes for the London & Rochester Trading Co until 1968, when she was bought out of trade by the Thames Sailing Barge Trust. Her last cargo was pineapple juice.

SB Kathleen Spritsail Thames barge built 1901

The SB Kathleen was a spritsail Thames barge built by Glover at Gravesend, Kent, in England in 1901, and registered in Rochester. Her official number was 113,708. She was built to carry grain- for capacity rather than speed. she was 82.8 feet (25.2 m) long and had a beam of 19.7 feet (6.0 m). Light, she drew 30 inches (76 cm) of water, and laden 6 feet (1.8 m).

SB Xylonite

Xylonite is one of seven Thames barges built between 1925 and 1930 for F W Horlock, Mistley. She was sold by the Horlocks in 1958 and cut down to a motor barge in 1958. Xylonite was re-rigged in the 1970s by Tim Eliff and replated on the 1980s. She has been used for sail training since 1983.

<i>SB Kitty</i> (1895)

Kitty is a wooden Thames sailing barge in the bowsprit class of 65 tons. She was built in Harwich in 1895. She is No. 209 on the National Historic Ships Register.

SB <i>Reminder</i>

Reminder is one of seven Thames barges built between 1925 and 1930 for F W Horlock, Mistley.

SB Phoenician

The Phoenician is a wooden Thames sailing barge constructed in Sittingbourne in 1922. She was derigged after an accident in 1940. She left trade in 1973. In the 1980s, she was re-rigged to her original specification.

SB Ardwina

Ardwina was the last wooden Thames barge to be built in Ipswich. This was in 1909. She was registered in London. She worked commercially until 1956. She was laid up after a collision and restored as a yacht conversion. She is still sailing in 2018, based at St Katherine Docks, and regularly passes under Tower Bridge.

SB Mirosa

Mirosa is a Thames barge which was built in 1892. From 1892 until 1947, she sailed under the name Ready when the name was sold to Trinity House for a lightship support vessel. Under her new name, she traded until 1955. Mirosa has never had an engine.

SB Edme English barge (1898)

Edme is a Thames barge which was built in 1898 for the Horlocks of Mistley. She was registered in Harwich. She is one of two barge sailing today that have no auxiliary engine.

SB <i>George Smeed</i> A Thames sailing barge built in 1882

George Smeed is a Thames barge built in 1882 by Smeed Dean & Co. Ltd. in Murston.

<i>Blue Mermaid</i>

Blue Mermaid is a steel-hulled Thames sailing barge constructed between 2015 and 2019. She was built specifically to operate under sail and does not carry an engine. She is a replica of an older vessel of the same name, built in 1930 but sunk by enemy action during the Second World War.

References

  1. ↑ Murphy, Chris (22 December 2017). "Dartford lock welcomes first Thames sailing barge visit for decades". Gravesend Reporter. Retrieved 19 April 2018.
  2. ↑ Decima 1984.
  3. ↑ Benham, Kershaw & Finch 1986, p. 156.
  4. ↑ Benham, Kershaw & Finch 1986, p. 158.
  5. ↑ Benham, Kershaw & Finch 1986, pp. 159, 160.
  6. ↑ Mayes 2018.
  7. ↑ Benham, Kershaw & Finch 1986.
  8. 1 2 3 4 "Barges for Sale | The Barge Blog". sailingbarges.wordpress.com. Retrieved 21 April 2018.
  9. ↑ Dartford & Crayford Navigation. (Dartford Creek)
  10. ↑ March 1948, p. 270.
  11. ↑ Walsh 1986, p. 26.
  12. 1 2 3 4 5 6 7 March 1948, p. 267.
  13. ↑ March 1948, p. 265.
  14. ↑ Vandekar, Earle D. "Sailor's Woolwork -Woolie- of a Thames Barge with banner reading Harry & Nellie, Circa 1885-1900". www.vandekar.com. Retrieved 31 March 2018.
  15. ↑ March 1948, p. 266.
Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.