Senator George Sellar Bridge

Last updated

Senator George Sellar Bridge
Senator George Stellar Bridge Wenatchee Washington.jpg
Coordinates 47°24′35″N120°17′44″W / 47.40983°N 120.29568°W / 47.40983; -120.29568 (Columbia River Bridge)
CarriesWA-285.svg SR 285
Crosses Columbia River
Locale East Wenatchee, Washington / Wenatchee, Washington
Maintained byState of Washington
Characteristics
Design Through arch bridge
Total length1,208 feet (368 m)
Longest span480 feet (150 m)
Clearance below 85 feet (26 m) [1]
History
OpenedOctober 28, 1950
Replaces Columbia River Bridge (Wenatchee, Washington)
USA Washington location map.svg
Red pog.svg
Location in Washington
Nearest city Wenatchee, Washington
Arealess than one acre
Built1950
Built byWashington State Department of Highways
MPS Bridges of Washington State MPS
NRHP reference No. 95000623 [2]
Added to NRHPMay 24, 1995
Location
Senator George Sellar Bridge

The Senator George Sellar Bridge at Wenatchee, Washington was built in 1950 as the "Columbia River Bridge" to carry U.S. Route 2 across the Columbia River.

Contents

The steel suspended tied-arch bridge has a main span of 480 feet (150 m) with 224-foot (68 m) anchor arms. The suspended portion of roadway comprises 352 feet (107 m) and is 54 feet (16 m) wide, carrying five lanes (originally four) with a median divider strip at a height of 180 feet (55 m) above mean water level. The new bridge was recognized by the American Institute of Steel Construction as the most beautiful bridge of 1950 for spans over 400 feet (120 m) in length. [3] [4] The bridge's engineer was R. W. Finke. The contractor was the General Construction Company of Seattle, using steel fabricated by the American Bridge Company. The bridge rests on two concrete piers in the river, with the central arch between them, and cantilever spans extending to concrete abutments high on the riverbanks. [3]

The bridge was renamed in 2000 after George L. Sellar, a Washington state senator who died that year. [5] [6] Since then, the name "Columbia River Bridge" refers to the older bridge (built in 1908) nearby. Senator George Sellar Bridge carries Washington State Route 285 since the construction of the Richard Odabashian Bridge for Route 2 farther north. An additional lane was added in 2009–2010. [7] The bridge was placed on the National Register of Historic Places on May 24, 1995. [8]

See also

Related Research Articles

<span class="mw-page-title-main">Yaquina Bay Bridge</span> Bridge in Newport, Oregon

The Yaquina Bay Bridge is an arch bridge that spans Yaquina Bay south of Newport, Oregon. It is one of the most recognizable of the U.S. Route 101 bridges designed by Conde McCullough and one of eleven major bridges on the Oregon Coast Highway designed by him. It superseded the last ferry crossing on the highway.

<span class="mw-page-title-main">Navajo Bridge</span> Bridge pair in Arizona, United States

Navajo Bridge is the name of twin steel spandrel arch bridges that cross the Colorado River in the Grand Canyon National Park in northern Coconino County, Arizona, United States. The newer of the two spans carries vehicular traffic on U.S. Route 89A (US 89A) over Marble Canyon between Bitter Springs and Jacob Lake, allowing travel into a remote Arizona Strip region north of the Colorado River including the North Rim of Grand Canyon National Park.

<span class="mw-page-title-main">Key Bridge (Washington, D.C.)</span> Bridge in Washington, D.C., and Virginia, U.S.

The Francis Scott Key Bridge, more commonly known as the Key Bridge, is a six-lane reinforced concrete arch bridge carrying U.S. Route 29 (US 29) across the Potomac River between the Rosslyn neighborhood of Arlington County, Virginia, and the Georgetown neighborhood of Washington, D.C. Completed in 1923, it is Washington's oldest surviving road bridge across the Potomac River.

<span class="mw-page-title-main">Columbia Bridge (Connecticut River)</span> Bridge in New Hampshire and Lemington, Vermont

The Columbia Bridge is a covered bridge, carrying Columbia Bridge Road over the Connecticut River between Columbia, New Hampshire and Lemington, Vermont. Built in 1911–12, it is one of only two New Hampshire bridges built with Howe trusses, and is one of the last covered bridges built in the historic era of covered bridge construction in both states. It was listed on the National Register of Historic Places in 1976.

<span class="mw-page-title-main">Fairfax Bridge (Washington)</span> Bridge in Melmont, Washington

The Fairfax Bridge is a steel-lattice three-hinged arch bridge spanning the Carbon River on State Route 165 in Pierce County, Washington. Previous to the construction of the bridge in 1921, the only route south to the area around Fairfax was by train. At a total cost of $80,000, the bridge's deck sits 250 feet (76 m) above the river. Being a single-lane bridge, vehicles must yield to oncoming traffic already on the bridge.

<span class="mw-page-title-main">Washington State Route 285</span> Highway in Washington

State Route 285 (SR 285) is a short state highway serving Douglas and Chelan counties, located in the U.S. state of Washington. The highway serves Wenatchee and runs 5 miles (8 km) from an interchange with State Route 28 (SR 28) in East Wenatchee to Downtown Wenatchee, crossing the Columbia River on the Senator George Sellar Bridge. After traversing downtown, the highway ends at an interchange with U.S. Route 2 (US 2) and US 97 north of the Wenatchee River in Sunnyslope.

<span class="mw-page-title-main">Wilson River Bridge</span> United States historic place

Wilson River Bridge, also known as Wilson River Bridge at Tillamook or Wilson River Bridge No. 01499, is a bridge near Tillamook, Oregon, United States. The 1931 bridge was designed by Conde McCullough in the Classical Revival and Art Deco styles. It covers a span of 180 feet (55 m) and brings coastal U.S. Route 101 (US 101) over the Wilson River.

<span class="mw-page-title-main">Kettle Falls Bridges</span> Bridge in Kettle Falls, Washington

The Kettle Falls Bridges is the collective name for a pair of steel cantilever bridges carrying State Route 20/U.S. Route 395 and the Kettle Falls International Railway across the Columbia River at Kettle Falls, Washington. The south bridge carries motor vehicle traffic while the similar northern span is used for rail.

<span class="mw-page-title-main">Stark Covered Bridge</span> United States historic place

The Stark Covered Bridge is a historic wooden covered bridge over the Upper Ammonoosuc River in Stark, New Hampshire. It carries a connecting roadway which joins the Northside Road to New Hampshire Route 110. The bridge was built in either 1857 or 1862, replacing a floating bridge that had been located a short way upstream. It is a two-span Paddleford truss bridge, which is a regional variant of the Long truss. It is 151 feet (46 m) long with a span of 138 feet (42 m), and is 29 feet (8.8 m) wide, carrying an 18-foot (5.5 m) wide roadway and two 6.5-foot (2.0 m) sidewalks. The shore ends of the bridge rest on abutments of granite stone, while the center of the bridge is supported by a reinforced concrete pier, which is flared on the upstream side to deflect debris. The bridge is reinforced with steel beams, giving it a carrying capacity of 15 tons. It is decorated with pendant acorn finials and painted bright white.

<span class="mw-page-title-main">Columbia River Bridge (Wenatchee, Washington)</span> Bridge in Washington / West Wenatchee, Washington

The Columbia River Bridge at Wenatchee, Washington, also known as the Old Wenatchee Bridge, was built by the Washington Bridge Company in 1908, primarily as a means to carry irrigation water pipelines across the Columbia River. It was the first road bridge over the Columbia south of Canada. The bridge is a pin-connected cantilever truss, 1,600 feet (490 m) long, with one 200-foot (61 m) Pratt truss between two 160-foot (49 m) cantilever arms, with 240-foot (73 m) side arms and a 60 feet (18 m) girder span. The bridge was purchased by the Washington highway department for $182,000 for highway use. As originally built, the bridge carried a 20.5-foot (6.2 m) wide timber roadway, with additional ability to carry a street railway. However, the east approach to the bridge was built at a 6% grade, limiting its potential.

<span class="mw-page-title-main">Northport Bridge</span> United States historic place

The Northport Bridge spans the Columbia River near Northport, Washington, close to the border with Canada. The steel cantilever through-truss bridge replaced an 1897 timber bridge, and was opened in 1951. It carries Washington State Route 25. It is one of a series of similar bridges built at about the same time, including the Grand Coulee Bridge and the Kettle Falls Bridges.

<span class="mw-page-title-main">M-28–Sand River Bridge</span> United States historic place

The M-28–Sand River Bridge is a bridge located on M-28 over the Sand River in Onota Township, Michigan. It was listed on the National Register of Historic Places in 1999.

<span class="mw-page-title-main">Nymore Bridge</span> United States historic place

The Nymore Bridge is a reinforced concrete deck arch bridge spanning the Mississippi River in Bemidji, Minnesota. The bridge, built in 1916, has three arch spans. It is significant for its use of a reinforcing system patented by George M. Cheney during a time when engineers were experimenting with reinforcing materials and systems.

<span class="mw-page-title-main">Morey Memorial Bridge</span> United States historic place

The Samuel Morey Memorial Bridge is a historic bridge carrying New Hampshire Route 25A across the Connecticut River between Orford, New Hampshire and Fairlee, Vermont. The steel through-arch bridge was built in 1937–38 to replace an older wooden bridge which had been damaged by flooding in 1936. It spans 432 feet (132 m), stands about 35 feet (11 m) above the river, and its arches rise 85 feet (26 m) above the roadway. It rests on poured concrete abutments that have a light Art Deco or Moderne styling. Wing walls recede from the abutments into the banks in three stepped sections. Below the bridge in the river is visible some riprap, stone remnants of the old bridge's abutments and central pier. The bridge is of a "tied arch" design, in which the two arches are joined together by ties to distribute the active load. This is in contrast to the Justice Harlan Fiske Stone Bridge joining Brattleboro, Vermont and Chesterfield, New Hampshire, which was built about the same time, and distributes the active load to its abutments. The bridge components were manufactured by the American Bridge Company; construction was by Hagen-Thibodeau Construction Company at a contracted cost of just over $209,000.

<span class="mw-page-title-main">Ottauquechee River Bridge</span> United States historic place

The Ottauquechee River Bridge is a steel girder bridge carrying United States Route 5 across the Ottauquechee River in Hartland, Vermont. The bridge replaced a c. 1930 Warren deck truss bridge, built in the wake of Vermont's devastating 1927 floods, and listed on the National Register of Historic Places in 1990.

<span class="mw-page-title-main">Quechee Gorge Bridge</span> United States historic place

The Quechee Gorge Bridge is a historic bridge, carrying U.S. Route 4 (US 4) across Quechee Gorge, near the Quechee village of Hartford, Vermont. Built in 1911, it is Vermont's oldest surviving steel arch bridge. It was listed on the National Register of Historic Places in 1990.

<span class="mw-page-title-main">Winooski Street Bridge</span> United States historic place

The Winooski Street Bridge is a historic bridge carrying Winooski Street across the Winooski River between Duxbury and Waterbury, Vermont. Built in 1928, it is a Parker through truss, one of only two of this type on the Winooski River and an increasingly rare bridge type in the state. It was listed on the National Register of Historic Places in 2006 as Bridge 31.

<span class="mw-page-title-main">Coburn Covered Bridge</span> United States historic place

The Coburn Covered Bridge is a historic covered bridge, carrying Coburn Road over the Winooski River in eastern East Montpelier, Vermont. Built in 1851, it is the town's only surviving 19th-century covered bridge. It was listed on the National Register of Historic Places in 1974.

<span class="mw-page-title-main">Hassayampa Bridge</span> United States historic place

The Hassayampa Bridge is a bridge spanning the Hassayampa River in Hassayampa, Arizona, located in Maricopa County. The bridge was completed in 1929 and was listed on the National Register of Historic Places in 1988. The bridge was scheduled for demolition in 1983.

<span class="mw-page-title-main">Jeffersonville Bridge</span> United States historic place

The Jeffersonville Bridge is a steel girder bridge carrying Vermont Route 108 across the Lamoille River, just north of the village of Jeffersonville, Vermont. It was built in 2014, replacing a Parker through truss bridge built in 1931; the latter bridge was listed on the National Register of Historic Places in 1991.

References

  1. "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved September 1, 2011.
  2. "National Register Information System". National Register of Historic Places . National Park Service. July 9, 2010.
  3. 1 2 Krier, Robert H.; Barber, J. Byron; Bruce, Robert; Holstine, Craig (December 12, 1991). "National Register of Historic Places Registration Form: Columbia River Bridge at Wenatchee" (PDF). National Park Service. Retrieved September 1, 2011.
  4. PDF
  5. Seabrook, Don (April 7, 2021). "Looking back: Sen. George Sellar Bridge". The Wenatchee World.
  6. Ammons, David (December 30, 2000). "George Sellar, GOP leader, dies at 71". The Seattle Times.
  7. "George Sellar Bridge to Open for Pedestrians". Manson Village Tribune. September 22, 2009. Retrieved September 1, 2011.
  8. "Nomination Form for Senator George Sellar Bridge". National Park Service. and accompanying pictures

Commons-logo.svg Media related to Senator George Stellar Bridge at Wikimedia Commons