Fog collection

Last updated
Atrapanieblas or fog collection in Alto Patache, Atacama Desert, Chile Atrapanieblas en Alto Patache.jpg
Atrapanieblas or fog collection in Alto Patache, Atacama Desert, Chile

Fog collection is the harvesting of water from fog using large pieces of vertical mesh netting to induce the fog-droplets to flow down towards a trough below. The setup is known as a fog fence, fog collector or fog net. Through condensation, atmospheric water vapour from the air condenses on cold surfaces into droplets of liquid water known as dew. The phenomenon is most observable on thin, flat, exposed objects including plant leaves and blades of grass. As the exposed surface cools by radiating its heat to the sky, atmospheric moisture condenses at a rate greater than that of which it can evaporate, resulting in the formation of water droplets. [1] [2]

Contents

Water condenses onto the array of parallel wires and collects at the bottom of the net. This requires no external energy and is facilitated naturally through temperature fluctuation, making it attractive for deployment in less developed areas. The term 'fog fence' comes from its long rectangular shape resembling a fence, but fog collectors are not confined just to this structural style. [3] The efficiency of the fog collector is based on the net material, the size of the holes and filament, and chemical coating. Fog collectors can harvest from 2% up to 10% of the moisture in the air, depending on their efficiency. [4] An ideal location is a high altitude arid area near cold offshore currents, where fog is common, and therefore, the fog collector can produce the highest yield. [3]

Historical origin

The organized collection of dew or condensation through natural or assisted processes is an ancient practice, from the small-scale drinking of pools of condensation collected in plant stems (still practiced today by survivalists), to large-scale natural irrigation without rain falling, such as in the Atacama and Namib deserts. The first man-made fog collectors stretch back as far as the Inca Empire, where buckets were placed under trees to take advantage of condensation. [5]

Several man-made devices such as antique stone piles in Ukraine, medieval dew ponds in southern England and volcanic stone covers on the fields of Lanzarote have all been thought to be possible dew-catching devices.

One of the first recorded projects of fog collection was in 1969 in South Africa as a water source for an air force base. The structure consisted of two fences each 100m2. Between the two, 11 litres of water was produced on average per day over the 14 month study, which is 0.05 litres of water for every square meter. The next large study was performed by the National Catholic University of Chile and the International Development Research Centre in Canada in 1987. One hundred 48m2 fog fences were assembled in northern Italy. The project was able to yield on average 0.5 litre of water for every square meter, or 33L for each of the 300 villagers, each day. [3]

In nature

Fog collectors were first seen in nature as a technique for collecting water by some insects and foliage. Namib Desert beetles live off water that condenses on their wings due to a pattern of alternating hydrophilic (water attracting) and hydrophobic (water repelling) regions. Redwood forests are able to survive on limited rainfall due to the addition of condensation on needles which drip into the trees' root systems. [3]

Parts of a fog collector

The fog collector is made up of three major parts: the frame, the mesh netting, and the trough or basin.

The frame supports the mesh netting and can be made from a wide array of materials from stainless steel poles to bamboo. The frame can vary in shape. Proposed geometries include linear, similar to a fence and cylindrical. Linear frames are rectangles with the vertical endpoints embedded into the ground. They have rope supports connected at the top and staked into the ground to provide stability. [6]

The mesh netting is where the condensation of water droplets appear. It consists of filaments knitted together with small openings, coated with a chemical to increase condensation. Shade Cloth is used for mesh structure because it can be locally sourced in underdeveloped countries. The filaments are coated to be hydrophilic and hydrophobic, which attracts and repels water to increase the condensation. [3] This can retrieve 2% of moisture in the air. Efficiency increases as the size of the filaments and the holes decrease. The most optimal mesh netting is made from stainless steel filaments the size of three to four human hairs and with holes that are twice as big as the filament. The netting is coated in a chemical that decreases water droplet's contact angle hysteresis, which allows for more small droplets to form. This type of netting can capture 10% of the moisture in the air. [4]

Below the mesh netting of a fog fence, there is a small trough for the water to be collected in. The water runs from the trough to some type of storage container or irrigation system for use. If the fog collector is circular the water will be deposited into a basin placed at the bottom of the netting. [6]

Principle

Fog contains typically from 0.05 to 1 grams of water per cubic meter, [7] with droplets from 1 to 40 micrometres in diameter. It settles slowly and is carried by wind. Therefore, an efficient fog fence must be placed facing the prevailing winds, and must be a fine mesh, as wind would flow around a solid wall and take the fog with it.

The water droplets in the fog deposit on the mesh. A second mesh rubbing against the first causes the droplets to coalesce and run to the bottom of the meshes, where the water may be collected and led away.

Advantages and disadvantages

Advantages

Water can be collected in any environment, including extremely arid environments such as the Atacama Desert, one of the driest places on earth. [4] The harvested water can be safer to drink than ground water. Fog collection is considered low maintenance because it requires no exterior energy and only an occasional brushing of the nets to keep them clean. Parts can sometimes be sourced locally in underdeveloped countries, which allows for the collector to be fixed if broken and to not sit in disrepair. No in-depth training is necessary for repairing the collector. Fog collectors are low cost to implement compared to other water alternatives. [6]

Disadvantages

Fog fences are limited in quantity by the regional climate and topography and cannot produce more water on demand. Their yields are not consistent year round and are affected by local weather and global weather fluctuations (such as El Niño). Their water supply can still be contaminated by windborne dust, birds, and insects. The moisture collected can promote growth of mold and other possibly toxic microorganisms on the mesh. [6]

Modern methods

In the mid-1980s, the Meteorological Service of Canada (MSC) began constructing and deploying large fog collecting devices on Mount Sutton in Quebec. These simple tools consisted of a large piece of canvas (generally 12 m long and 4 m high) stretched between two 6 m wooden poles held up by guy wires, with a long trough underneath. Water would condense out of the fog onto the canvas, coalesce into droplets, and then slide down to drip off of the bottom of the canvas and into the collecting trough below.

Chilean project

The intent of the Canadian project was simply to use fog collection devices to study the constituents of the fog that they collected. However, their success sparked the interest of scientists in Chile's National Forest Corporation (CONAF) and Catholic University of Chile to exploit the camanchaca or garúa clouds which blanket the northern Chile coast in the southern hemisphere winter. With funding from the International Development Research Centre (IDRC), the MSC collaborated with the Chileans to begin testing different designs of collection facilities on El Tofo Mountain in northern Chile. Once perfected, approximately 50 of the systems were erected and used to irrigate seedlings on the hillside in an attempt at reforestation. Once vegetation became established, it should have begun collecting fog for itself, like the many cloud forests in South America, in order to flourish as a self-sustaining system. [8]

The success of the reforestation project is unclear, but approximately five years after the beginning of the project, the nearby village of Chungungo began to push for a pipeline to be sent down the mountain into the town. Though this was not in the scope of CONAF, which pulled out at this point, it was agreed to expand the collection facility to 94 nylon mesh collectors with a reserve tank and piping in order to supply the 300 inhabitants of Chungungo with water. [3]

The IDRC reports that ten years later in 2002, only nine of the devices remained and the system overall was in very poor shape.[ citation needed ] Conversely, the MSC states in its article that the facility was still fully functional in 2003, but provides no details behind this statement.[ citation needed ] In June 2003 the IDRC reported that plans existed to revive the site on El Tofo.[ citation needed ]

Dar Si Hmad

Lafram from the Dar Si Hmad team talking about fog harvesting Mahdi Lafram Oxford.jpg
Lafram from the Dar Si Hmad team talking about fog harvesting

In March 2015 Dar Si Hmad (DSH), a Moroccan NGO, built a large fog-collection and distribution system in the Anti-Atlas Mountains. [9] The region DSH worked in is water-poor, but abundant fog drapes the area 6 months out of the year. [10] DSH's system included technology that monitored the water system via SMS message. These capabilities were crucial in dealing with the effects of fog collection on the social fabric of these rural areas. [11] According to MIT researchers, the fog collection methods implemented by DSH have "improved the fog-collecting efficiency by about five hundred per cent." [12]

International use

Despite the apparent failure of the fog collection project in Chungungo, the method has caught on in some localities around the world. [12] [13] [14] [15] [16] The International Organization for Dew Utilization organization is working on foil-based effective condensers for regions where rain or fog cannot cover water needs throughout the year. Shortly after the initial success of the project, researchers from the participating organizations formed the nonprofit organization FogQuest, which has set up operational facilities in Yemen and central Chile, while still others are under evaluation in Guatemala, Haiti, and Nepal, this time with much more emphasis on the continuing involvement of the communities in the hopes that the projects will last well into the future. Villages in a total of 25 countries worldwide now[ when? ] operate fog collection facilities. There is potential for the systems to be used to establish dense vegetation on previously arid grounds. It appears that the inexpensive collectors will continue to flourish. There have also been several attempts to set up fog catchers in Peru, albeit with varying success. [17] [18] [19] [20]

See also

Related Research Articles

<span class="mw-page-title-main">Condensation</span> Condensation is the change of state of matter from a gas phase into a liquid phase.

Condensation is the change of the state of matter from the gas phase into the liquid phase, and is the reverse of vaporization. The word most often refers to the water cycle. It can also be defined as the change in the state of water vapor to liquid water when in contact with a liquid or solid surface or cloud condensation nuclei within the atmosphere. When the transition happens from the gaseous phase into the solid phase directly, the change is called deposition.

<span class="mw-page-title-main">Humidity</span> Concentration of water vapour in the air

Humidity is the concentration of water vapor present in the air. Water vapor, the gaseous state of water, is generally invisible to the human eye. Humidity indicates the likelihood for precipitation, dew, or fog to be present.

<span class="mw-page-title-main">Dew</span> Water in the form of droplets that appears on thin, exposed objects in the morning or evening

Dew is water in the form of droplets that appears on thin, exposed objects in the morning or evening due to condensation.

<span class="mw-page-title-main">Dew point</span> Temperature at which air becomes saturated with water vapour during a cooling process

The dew point of a given body of air is the temperature to which it must be cooled to become saturated with water vapor. This temperature depends on the pressure and water content of the air. When the air is cooled below the dew point, its moisture capacity is reduced and airborne water vapor will condense to form liquid water known as dew. When this occurs through the air's contact with a colder surface, dew will form on that surface.

<span class="mw-page-title-main">Fog</span> Atmospheric phenomenon

Fog is a visible aerosol consisting of tiny water droplets or ice crystals suspended in the air at or near the Earth's surface. Fog can be considered a type of low-lying cloud usually resembling stratus, and is heavily influenced by nearby bodies of water, topography, and wind conditions. In turn, fog affects many human activities, such as shipping, travel, and warfare.

<span class="mw-page-title-main">Dehumidifier</span> Device which reduces humidity

A dehumidifier is an air conditioning device which reduces and maintains the level of humidity in the air. This is done usually for health or thermal comfort reasons, or to eliminate musty odor and to prevent the growth of mildew by extracting water from the air. It can be used for household, commercial, or industrial applications. Large dehumidifiers are used in commercial buildings such as indoor ice rinks and swimming pools, as well as manufacturing plants or storage warehouses. Typical air conditioning systems combine dehumidification with cooling, by operating cooling coils below the dewpoint and draining away the water that condenses.

<span class="mw-page-title-main">Mushroom cloud</span> Cloud of debris and smoke from a large explosion

A mushroom cloud is a distinctive mushroom-shaped flammagenitus cloud of debris, smoke, and usually condensed water vapor resulting from a large explosion. The effect is most commonly associated with a nuclear explosion, but any sufficiently energetic detonation or deflagration will produce the same effect. They can be caused by powerful conventional weapons, like thermobaric weapons such as the ATBIP and GBU-43/B MOAB. Some volcanic eruptions and impact events can produce natural mushroom clouds.

<span class="mw-page-title-main">Mildew</span> Form of fungus

Mildew is a form of fungus. It is distinguished from its closely related counterpart, mould, largely by its colour: moulds appear in shades of black, blue, red, and green, whereas mildew is white. It appears as a thin, superficial growth consisting of minute hyphae produced especially on living plants or organic matter such as wood, paper or leather. Both mould and mildew produce distinct offensive odours, and both have been identified as the cause of certain human ailments.

<span class="mw-page-title-main">Cloud physics</span> Study of the physical processes in atmospheric clouds

Cloud physics is the study of the physical processes that lead to the formation, growth and precipitation of atmospheric clouds. These aerosols are found in the troposphere, stratosphere, and mesosphere, which collectively make up the greatest part of the homosphere. Clouds consist of microscopic droplets of liquid water, tiny crystals of ice, or both, along with microscopic particles of dust, smoke, or other matter, known as condensation nuclei. Cloud droplets initially form by the condensation of water vapor onto condensation nuclei when the supersaturation of air exceeds a critical value according to Köhler theory. Cloud condensation nuclei are necessary for cloud droplets formation because of the Kelvin effect, which describes the change in saturation vapor pressure due to a curved surface. At small radii, the amount of supersaturation needed for condensation to occur is so large, that it does not happen naturally. Raoult's law describes how the vapor pressure is dependent on the amount of solute in a solution. At high concentrations, when the cloud droplets are small, the supersaturation required is smaller than without the presence of a nucleus.

<span class="mw-page-title-main">Solar still</span> Water distillation and purification system using solar energy

A solar still distills water with substances dissolved in it by using the heat of the Sun to evaporate water so that it may be cooled and collected, thereby purifying it. They are used in areas where drinking water is unavailable, so that clean water is obtained from dirty water or from plants by exposing them to sunlight.

<span class="mw-page-title-main">Camanchaca</span>

Camanchacas are marine stratocumulus cloud banks that form on the Chilean coast, by the Earth's driest desert, the Atacama Desert, and move inland. In Peru, a similar fog is called garúa, and in Angola cacimbo. On the side of the mountains where these cloud banks form, the camanchaca is a dense fog that does not produce rain. The moisture that makes up the cloud measure between 1 and 40 microns across, too fine to form rain droplets.

An atmospheric water generator (AWG), is a device that extracts water from humid ambient air, producing potable water. Water vapor in the air can be extracted either by condensation - cooling the air below its dew point, exposing the air to desiccants, using membranes that only pass water vapor, collecting fog, or pressurizing the air. AWGs are useful where potable water is difficult to obtain, because water is always present in ambient air.

<i>Stenocara gracilipes</i> Species of beetle

Stenocara gracilipes is a species of beetle that is native to the Namib Desert in southern Africa. This is one of the most arid areas of the world, receiving only 1.4 centimetres (0.55 in) of rain per year. The beetle is able to survive by collecting water on its bumpy back surface from early morning fogs.

<span class="mw-page-title-main">Atmospheric convection</span> Atmospheric phenomenon

Atmospheric convection is the result of a parcel-environment instability, or temperature difference layer in the atmosphere. Different lapse rates within dry and moist air masses lead to instability. Mixing of air during the day which expands the height of the planetary boundary layer leads to increased winds, cumulus cloud development, and decreased surface dew points. Moist convection leads to thunderstorm development, which is often responsible for severe weather throughout the world. Special threats from thunderstorms include hail, downbursts, and tornadoes.

<span class="mw-page-title-main">Garúa</span>

Garúa is a Spanish word meaning drizzle or mist. Although used in other contexts in the Spanish-speaking world, garúa most importantly refers to the moist cold fog that blankets the coasts of Peru, southern Ecuador, and northern Chile, especially during the southern hemisphere winter. In Chile, a similar fog is called camanchaca. Garúa brings mild temperatures and high humidity to a tropical coastal desert. It also provides moisture from fog and mist to a nearly-rainless region and permits the existence of vegetated fog oases, called lomas.

<span class="mw-page-title-main">Fog desert</span> Type of desert

A fog desert is a type of desert where fog drip supplies the majority of moisture needed by animal and plant life.

<span class="mw-page-title-main">Air well (condenser)</span> A building or device used to collect water by condensing the water vapor present in the air

An air well or aerial well is a structure or device that collects water by promoting the condensation of moisture from air. Designs for air wells are many and varied, but the simplest designs are completely passive, require no external energy source and have few, if any, moving parts.

<span class="mw-page-title-main">Condensation cloud</span> Observable at large explosions in humid air

A transient condensation cloud, also called a Wilson cloud, is observable surrounding large explosions in humid air.

<span class="mw-page-title-main">Fog drip</span> Stage of water cycle

Fog drip is water dripping to the ground during fog. It occurs when water droplets from the fog adhere to the needles or leaves of trees or other objects, coalesce into larger drops and then drop to the ground.

<i>Lomas</i> Fog-watered bioregions in the coastal desert of Peru and northern Chile

Lomas, also called fog oases and mist oases, are areas of fog-watered vegetation in the coastal desert of Peru and northern Chile. About 100 lomas near the Pacific Ocean are identified between 5°S and 30°S latitude, a north–south distance of about 2,800 kilometres (1,700 mi). Lomas range in size from a small vegetated area to more than 40,000 hectares and their flora includes many endemic species. Apart from river valleys and the lomas the coastal desert is almost without vegetation. Scholars have described individual lomas as "an island of vegetation in a virtual ocean of desert."

References

  1. "The Fog Collectors: Harvesting Water From Thin Air". State of the Planet. 2011-03-07. Retrieved 2023-01-23.
  2. "1.3 Fog harvesting". www.oas.org. Retrieved 2023-01-23.
  3. 1 2 3 4 5 6 Fessehaye, Mussie; Abdul-Wahab, Sabah A.; Savage, Michael J.; Kohler, Thomas; Gherezghiher, Tseggai; Hurni, Hans (2014). "Fog-water collection for community use". Renewable and Sustainable Energy Reviews. 29: 52–62. doi:10.1016/j.rser.2013.08.063. ISSN   1364-0321.
  4. 1 2 3 Chandler, David L. (2013-08-30). "How to Get Fresh Water out of Thin Air". MIT News.
  5. Cisneros, Luis Jaime (2009-11-12). "Fog-catching in a Peruvian slum". Daily Telegraph. The Telegraph. ISSN   0307-1235 . Retrieved 2017-10-17.
  6. 1 2 3 4 “1.3 Fog Harvesting.” Source Book of Alternative Technologies for Freshwater Augmentation in Latin America and the Caribbean, Unit of Sustainable Development and Environment General Secretariat, Organization of American States, 1997.
  7. "FogQuest: Sustainable Water Solutions FAQ". Archived from the original on 2011-07-26. Retrieved August 26, 2011.
  8. "1.3 Fog harvesting". www.oas.org. Retrieved 2020-05-01.
  9. "A Beacon Project: Harvesting Water from Fog". Dar Si Hmad.
  10. "Into Action - Fog nets". Munich Re Foundation.
  11. Farnum, Rebecca. L. (24 November 2015). "North Africa: small glimmers of light in bid to stop violence against women". The Conversation.
  12. 1 2 Toutohghi, Could Harvesting Fog Help Solve the World's Water Crisis? New Yorker. March 25, 2015
  13. Rioba, Benson Fog collectors net scarce water in Kenya, but face a cloudy future Reuters. March 25, 2016
  14. Nield, David Yemen is fighting its severe water shortage by harvesting its fog Science Alert. March 25, 2016
  15. Ojani, Chakad (2022-06-01). "Water in Atmospheric Suspension: Contact Zones between Ethnography and Speculative Realism". Social Analysis. 66 (2): 62–84. doi: 10.3167/sa.2022.660204 . ISSN   0155-977X. S2CID   252606441.
  16. Ojani, Chakad (February 2021). "The (ontological) politics of fog capture in Lima, Peru". Anthropology Today. 37 (1): 13–16. doi: 10.1111/1467-8322.12629 . ISSN   0268-540X. S2CID   234071344.
  17. Ojani, Chakad (2023-06-01). "Smallness and Small-device Heuristics: Scaling Fog Catchers Down and Up in Lima, Peru". Social Anthropology/Anthropologie Sociale. 31 (2): 39–53. doi: 10.3167/saas.2023.310204 . ISSN   0964-0282. S2CID   259700931.
  18. Ojani, Chakad (2021-09-22). "Ecology of Capture: Creating Land Titles Out of Thin Air in Coastal Peru". Ethnos: 1–20. doi:10.1080/00141844.2021.1965643. ISSN   0014-1844. S2CID   240528338.
  19. Ojani, Chakad (2022). "Speculative relations in Lima: Encounters with the limits of fog capture and ethnography". HAU: Journal of Ethnographic Theory. 12 (2): 468–481. doi:10.1086/720367. S2CID   253268268.
  20. Ojani, Chakad (2023). "The Promise of Fog Capture: Ground-Touching Clouds as a Material (Im)Possibility in Peru". Cultural Anthropology. 38 (2): 225–250. doi:10.14506/ca38.2.03.

Sources

Further reading