Pininfarina Sergio

Last updated

Pininfarina Sergio
Geneva MotorShow 2013 - Pininfarina Sergio right front view.jpg
The Pininfarina Sergio at the 2013 Geneva Motor Show
Overview
Manufacturer Pininfarina
Production2013(6 units)
Assembly Cambiano, Italy
Designer Fabio Filippini [1] with Luca Borgogno at Pininfarina [2]
Body and chassis
Class Sports car (S)
Body style 2-door barchetta
Layout Rear mid-engine, rear-wheel-drive
Platform Ferrari 458
Doors Swan
Powertrain
Engine 4.5 L Ferrari F136 F V8
Transmission 7-speed dual-clutch
Dimensions
Wheelbase 2,650 mm (104.3 in) [3]
Length4,550 mm (179.1 in) [3]
Width1,940 mm (76.4 in) [3]
Height1,140 mm (44.9 in) [3]
Curb weight 1,280 kg (2,822 lb) [3]

The Pininfarina Sergio is a concept car produced by the Italian design house Pininfarina. It was presented at the 2013 Geneva Motor Show as a tribute to the former chairman of the company and automotive designer, Sergio Pininfarina, who died on 3 July 2012. [4] The car is a coach built barchetta which is based on the mechanical underpinnings of the Ferrari 458 Spider. [5] [6] [7]

Contents

Design

Pininfarina Sergio rear Geneva MotorShow 2013 - Pininfarina Sergio left rear view.jpg
Pininfarina Sergio rear

The exterior design consists of floats and aerodynamic headrests which are attached to the roll bar rather than the body of the seats, becoming almost elements of the exterior more than the interior. In front of the door panel, two helmets are housed in a storage locker which are produced by Pininfarina in collaboration with Newmax and are personalised with the colour of the exterior. The open top body is designed with calculations and tests in the wind tunnel of Grugliasco to optimize aerodynamic performance. In particular, the full carbon body work results in weight savings of approximately 10% (150 lbs) over the aluminium body panels of the donor car. Other elements include unique 21" light alloy wheels by monodado with hub caps derived from Ferrari 458 Challenge, bespoke engine cover incorporating round holes inspired by the Ferrari Modulo and the elimination of a windshield which when combined with the car's air foil shaped front and by the use of a virtual windshield deploying at 31 mph (50 km/h) along with winglets incorporated in the front bumper, allows the arrival of a stream of air increasing with the speed of the car on the head of the driver and the passenger thereby increasing the car's aerodynamic character.

Taking cues from the 1965 Dino Berlinetta Speciale prototype which was the first solo project of Sergio Pininfarina from Ferrari as well as the Mythos and the Modulo concept cars, the design of the car is a simple open top car displaying design purity through the use of simple and sensual elements.

The reduction in weight and the incorporation of unique aerodynamic design elements enable the car to accelerate from 062 mph (100 km/h) in 3.4 seconds.

Production

Ferrari Sergio at the 2015 Geneva Motor Show Pininfarina Sergio, GIMS 2015 (Ank Kumar, Infosys Ltd) 07.jpg
Ferrari Sergio at the 2015 Geneva Motor Show
Ferrari Sergio rear view Ferrari Sergio, GIMS 2015 (Ank Kumar, Infosys Ltd) 04.jpg
Ferrari Sergio rear view

Ferrari built six units of the Sergio starting in 2015 and sold it to handpicked customers. The production version consists of heavy modifications over the concept with the most noticeable being the addition of the windshield along with a removable hard top. The headrests are no longer incorporated in the roll bar and the car now shares many components with its donor including the interior, tail lights, indicators and the side view mirrors. Performance remains the same as the donor car. Each unit reportedly cost US$3,000,000. [8]

Related Research Articles

<span class="mw-page-title-main">Cadillac Allanté</span> Luxury roadster produced by Cadillac

The Cadillac Allanté is a two-door, two-seater luxury roadster marketed by Cadillac from 1987 until 1993. It used a Cadillac chassis and running gear with a body built in Italy by coachbuilder Pininfarina. It was expensive to produce with the complete bodies flown to Detroit for final assembly. Over 21,000 were built during its seven-year production run.

<span class="mw-page-title-main">Ferrari 328</span> Motor vehicle

The Ferrari 328 GTB and GTS are mid-engine V8, two-seat sports cars created by Italian automobile manufacturer Ferrari. It was the successor to the Ferrari 308 GTB and GTS. While mechanically still based on the 308, modifications were made to the body, chassis, and engine, most notably an increase in engine displacement to 3.2 L for increased power and torque output. The 328 is still considered by some enthusiasts to be one of the most reliable and functional Ferraris; unlike other models, much of its maintenance can be performed without lowering the engine from the vehicle. In 1989, the 328 was succeeded by the 348.

<span class="mw-page-title-main">Ferrari 360</span> Italian two-seater sports car

The Ferrari 360 is a two-seater, mid-engine, rear wheel drive sports car manufactured by Italian automotive manufacturer Ferrari from 1999 until 2005. It succeeded the Ferrari F355 and was replaced by the Ferrari F430 in 2004.

<span class="mw-page-title-main">Ferrari Enzo</span> Italian flagship sports car

The Ferrari Enzo, officially marketed as Enzo Ferrari, is a mid-engine sports car manufactured by Italian automobile manufacturer Ferrari and named after the company's founder, Enzo Ferrari. It was developed in 2002 using Formula One technology, such as a carbon-fibre body, F1-style automated-shift manual transmission, and carbon fibre-reinforced silicon carbide (C/SiC) ceramic composite disc brakes, as well as technologies not allowed in F1, such as active aerodynamics. The Enzo generates substantial amounts of downforce through its front underbody flaps, small adjustable rear spoiler and rear diffuser, which work in conjunction to produce 3,363 newtons (756 lbf) of downforce at 200 km/h (124 mph) and 7,602 newtons (1,709 lbf) of downforce at 300 km/h (186 mph), before decreasing to 5,738 newtons (1,290 lbf) at top speed.

<span class="mw-page-title-main">Ferrari F430</span> V8 sports car manufactured by Italian automobile manufacturer Ferrari as a successor to the 360

The Ferrari F430 is a sports car produced by the Italian automobile manufacturer Ferrari from 2004 until 2009 as a successor to the Ferrari 360. The car is an update to the 360 with exterior and performance changes. It was unveiled at the 2004 Paris Motor Show. The F430 was succeeded by the 458 which was unveiled on 28 July 2009.

<span class="mw-page-title-main">Ferrari 365 GT4 2+2, 400 and 412</span> Motor vehicle

The Ferrari 365 GT4 2+2, Ferrari 400 and Ferrari 412 are front-engined V12 2+2 grand tourers made by Italian manufacturer Ferrari between 1972 and 1989. The three cars are closely related, using the same body, chassis and engine evolved over time.

<span class="mw-page-title-main">Ferrari 550</span> Grand tourer produced by Ferrari

The Ferrari 550 Maranello is a front-engine V12 2-seat grand tourer built by Ferrari from 1996 to 2002. The 550 Maranello marked Ferrari's return to a front-engine, rear-wheel drive layout for its 2-seater 12-cylinder model, 23 years after the 365 GTB/4 Daytona had been replaced by the mid-engined Berlinetta Boxer.

<span class="mw-page-title-main">Ferrari 599</span> Grand Tourer produced by Ferrari from 2006–2012 as a successor to the 575M

The Ferrari 599 GTB Fiorano is a grand tourer produced by Italian automobile manufacturer Ferrari. It was the brand's front engined, two-seat model that replaced the 575M Maranello in 2006 as a 2007 model, and was replaced for the 2013 model year by the F12berlinetta.

<span class="mw-page-title-main">Pininfarina</span> Italian car design firm and coachbuilder

Pininfarina S.p.A. is an Italian car design firm and coachbuilder, with headquarters in Cambiano, Turin, Italy. The company was founded by Battista "Pinin" Farina in 1930. On 14 December 2015, the Indian multinational giant Mahindra Group acquired 76.06% of Pininfarina S.p.A. for about €168 million.

<span class="mw-page-title-main">Maserati Birdcage 75th</span> Motor vehicle

The Maserati Birdcage 75th is a functional concept car designed and developed by a Pininfarina design team led by Lowie Vermeersch, including Jason Castriota and Giuseppe Randazzo under the direction of Ken Okuyama. It was first introduced at the 2005 Geneva Auto Show. It was named to honor the classic Maserati Birdcage race cars of the 1960s and Pininfarina's 75th anniversary. The Birdcage was the result of a collaboration between Maserati, Pininfarina and Motorola to showcase their technical expertise. The car was completed in just 2 months, following a fast pace design phase using 3D renderings.

<span class="mw-page-title-main">Ferrari Modulo</span> Italian concept sports car

The Ferrari 512S Modulo is a concept sports car designed by Paolo Martin of the Italian carrozzeria Pininfarina, unveiled at the 1970 Geneva Motor Show.

<span class="mw-page-title-main">Ferrari 458</span> Italian mid-engine sports car produced by Ferrari

The Ferrari 458 Italia is an Italian mid-engine sports car produced by Ferrari. The 458 is the successor of the F430, and was first officially unveiled at the 2009 Frankfurt Motor Show. It was succeeded by the 488 GTB in 2015.

<span class="mw-page-title-main">LaFerrari</span> Italian sports car manufactured 2013–2018

LaFerrari, project name F150, is a limited production mid-engine, mild hybrid sports car built by Italian automotive manufacturer Ferrari. LaFerrari means "The Ferrari" in Italian, meaning this is supposed to be the definitive Ferrari.

<span class="mw-page-title-main">Ferrari FF</span> Motor vehicle by ferrari

The Ferrari FF is a grand tourer presented by Italian automobile manufacturer Ferrari on March 1, 2011, at the Geneva Motor Show as a successor to the 612 Scaglietti grand tourer. It is Ferrari's first production four-wheel drive model. The body style has been described as a shooting brake, a type of two-door coupé-based sporting estate. The FF has a top speed of 335 km/h (208 mph) and it accelerates from 0 to 100 km/h (62 mph) in 3.7 seconds. Ferrari states that the FF was the world's fastest four-seat automobile upon its release to the public. The FF costs US$300,000, with 800 being produced during the first year.

<span class="mw-page-title-main">Ferrari F12</span> Grand Tourer produced by Ferrari as the successor to the 599 GTB

The Ferrari F12berlinetta is a front engine, rear-wheel-drive grand tourer produced by Italian automobile manufacturer Ferrari. The F12berlinetta debuted at the 2012 Geneva Motor Show, and replaced the 599 grand tourer. The naturally aspirated 6.3 litre Ferrari V12 engine used in the F12berlinetta has won the 2013 International Engine of the Year Award in the Best Performance category and Best Engine above 4.0 litres. The F12berlinetta was named "The Supercar of the Year 2012" by car magazine Top Gear. The F12berlinetta was replaced by the 812 Superfast in early 2017.

The Pininfarina Sintesi is a concept car designed by Pininfarina and unveiled in 2008 at the Geneva Motor Show. The name 'Sintesi' means 'synthesis' in the Italian language.

<span class="mw-page-title-main">Ferrari 488</span> Mid-engine sports car produced by the Italian automobile manufacturer Ferrari

The Ferrari 488 is a mid-engine sports car produced by the Italian automobile manufacturer Ferrari. The car replaced the 458, being the first mid-engine Ferrari to use a turbocharged V8 since the F40. It was succeeded by the Ferrari F8.

<span class="mw-page-title-main">Ferrari 812 Superfast</span> Grand Tourer produced from 2017

The Ferrari 812 Superfast is a front mid-engine, rear-wheel-drive grand tourer produced by Italian sports car manufacturer Ferrari that made its debut at the 2017 Geneva Motor Show. The 812 Superfast is the successor to the F12berlinetta.

<span class="mw-page-title-main">Ferrari 365 P Berlinetta Speciale</span> 1966 concept sports car

The Ferrari 365 P Berlinetta Speciale was a concept sports car designed and produced by Pininfarina and Ferrari in 1966. It featured a mid-engined layout of a donor racing car chassis and three-seat arrangement with a central driving position, as later popularised on McLaren F1. It was the first purpose-built, mid-engined, road-going Ferrari-branded car. Other similar Ferraris at that time were road-usable race cars like the 1965 250 LM 'Speciale'.

<span class="mw-page-title-main">Ferrari Daytona SP3</span> Italian mid-engine Targa style sports car

The Ferrari Daytona SP3 is a limited production mid-engine sports car produced by Italian automobile manufacturer Ferrari, unveiled on 20 November 2021 for the 2023 model year. The Daytona SP3 is the latest in the "Icona" series of high-performance cars being produced by Ferrari after the Ferrari Monza SP series. 599 examples will be built from 2022 and will be sold for $2.25 million each. The Daytona SP3 is powered by a naturally aspirated 6.5-liter V12 that is shared with the 812 Superfast and marks the first return of Ferrari to naturally aspirated, mid mounted engines for limited edition cars without hybrid electric systems, since the Ferrari Enzo introduced in 2002.

References

  1. "Fabio Filippini on the Pininfarina Sergio concept". formtrends.com. 22 March 2013. Retrieved 31 October 2022.
  2. "Luca Borgogno (Automobili Pininfarina): così si entra nel mondo del design auto". it.motor1.com (in Italian). Retrieved 14 October 2020.
  3. 1 2 3 4 5 "Specifications" . Retrieved 28 December 2017.
  4. "Pininfarina". www.pininfarina.com.
  5. "Meet the first production Ferrari Sergio".
  6. "Radical Pininfarina Sergio concept moving toward production". www.gizmag.com.
  7. "Photos & Video Of Pininfarina's Ferrari-Based Sergio Concept".
  8. Lopez, Jonathan (24 August 2017). "Production version". topspeed. Retrieved 28 December 2017.