Toop (boat)

Last updated
Two Malay coaster in Java, with toop sail and rigging. Java Amiral E Paris Caboteur Malais.jpg
Two Malay coaster in Java, with toop sail and rigging.

Toop (also known as toup, prauw toop or perahu toop) is a type of boat-ship produced in East Indies. Appeared at the end of the 18th century, and built in local shipyards, this type of boat is one of the results of the incorporation of 'Western' and 'Nusantaran' technologies that began in the shipyards of the 17th and 18th European trading companies. This type of boat is commonly used for long-distance shipping. In the first half of the 19th century, this was the most common type of boat used by sailors and traders in Nusantara. [1] Majority of toop is owned by merchants from the western area of Nusantara. [2] :33

Contents

Description

A western hulled toop, at the right side of the image. Java Amiral E Paris Pirogue de passage de Surabaya et Caboteur nomme Toup.jpg
A western hulled toop, at the right side of the image.

Two to three masted, toop carries 2 similar trapezoid sail on the main mast and the fore mast; the sails are arranged in such a way that a toop can turn the bow towards the wind without lowering and moving the sail under the new wind, something very beneficial if beating to windward in a narrow place. The stern is equipped with European-style fore-and-aft sail, and there may be three or four small headsails attached to the bowsprit. The masts are not bipod or tripod, but only a single masts that was reinforced with shrouds similar to European masts attachments. [3]

Toop in general used for long-distance shipping and shows the much similarities with European design: The stern of many toop is quadrilateral (transom), and the shape of the hull is more similar to European sailing vessels than Nusantaran boats. Most of these boats are made using the same technique with those used to build European ships: Attaching the framework to keel first before the attaching the outer planking. [1] The boat sometimes also carried oars, numbered between 16 and 20. Some of them also towed a sloop behind that could carry the entire crew. [4] [1] The presence of large sloop indicates that the toop is prepared to operate in areas without dock facilities that can facilitate loading and unloading activities. [2] :33

The hull of toop is decked at fore and aft. The square stern has ornamental carvings. At the aft there is a cabin which rises slightly above deck and covered with a roof inclined longitudinally. South Sulawesian toop had this cabin entirely below deck. In light loads, the upperworks at sides were raised with mats. A cargo hatch is present abaft each mast. South Sulawesian prau toop only has 2 masts, the ones from Surabaya has taller masts. [5] :22–23

Toop in the Malacca strait. Detroit de Malacca Amiral E Paris Toup de Malacca.jpg
Toop in the Malacca strait.

However, different illustrations and descriptions showed variations of toop's hull: There are European-type hulls, with rectangular sterns and middle (axial) steering; there are boats with bow similar to European ships, but using side steering (double quarter rudder) and stern decks similar to padewakang. The difference of hull forms suggests that the word 'toop' actually refer to the sail plan, a combination of fore-and-aft 'Western' sails and two elevated rectangular sails that seems to be a variety of tanja sails. [6] [7]

The carrying capacity of toop is about 40–60 koyan (96.8–145 metric tons), the largest being 100 koyan (241,9 metric tons). [8] There are toop which is favored by Bugis, the shape is look like a padewakang, but uses two to three masts whose rigging is European-styled, and carrying a kind of spritsail. These boats are generally larger than padewakang, and only used for trading. [9] Western hulled toop is favored by the Dutch to be armed in case of war. [10] :74–75,79

U.S. office of strategic service noted the dimensions of toop: A length of 49–59 ft (14.94–17.98 m), breadth of 10–13 ft (3.05–3.96 m), and depth of 10–11.5 ft (3.05–3.51 m). [5] :23

See also

Related Research Articles

<span class="mw-page-title-main">Rig (sailing)</span> Description of the specific ways that a sailing craft is rigged

A sailing vessel's rig is its arrangement of masts, sails and rigging. Examples include a schooner rig, cutter rig, junk rig, etc. A rig may be broadly categorized as "fore-and-aft", "square", or a combination of both. Within the fore-and-aft category there is a variety of triangular and quadrilateral sail shapes. Spars or battens may be used to help shape a given kind of sail. Each rig may be described with a sail plan—formally, a drawing of a vessel, viewed from the side.

<span class="mw-page-title-main">Pinisi</span> Type of rigging of Indonesian sailing vessels

Literally, the word pinisi refers to a type of rigging of Indonesian sailing vessels. A pinisi carries seven to eight sails on two masts, arranged like a gaff-ketch with what is called 'standing gaffs' — i.e., unlike most Western ships using such a rig, the two main sails are not opened by raising the spars they are attached to, but the sails are 'pulled out' like curtains along the gaffs which are fixed at around the centre of the masts.

<span class="mw-page-title-main">Tongkang</span> Type of small boat in Southeast Asia

Tongkang or "Tong'kang" refers to several type of boats used to carry goods along rivers and shoreline in Maritime Southeast Asia. One of the earliest record of tongkang has a background of 14th century, being mentioned in Malay Annals which was composed no earlier than 17th century. One passage mentioned it as being used by Majapahit empire during the 1350 attack on Singapura.

<span class="mw-page-title-main">Lambo (boat)</span> Two types of traditional boats from Indonesia

The term lambo or lamba refer to two types of traditional boats from Indonesia.

<i>Pinas</i> (ship)

The pinas, sometimes called "pinis" as well, is a type of schooner of the east coast of the Malay peninsula, built in the Terengganu area. This kind of vessel was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as one of the two types of traditional sailing vessels the late Malay maritime culture has developed: The bedar and the pinas.

<span class="mw-page-title-main">Bedar (ship)</span>

The term bedar is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas. These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels — anak bedar and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.

<span class="mw-page-title-main">Sandeq</span>

A Sandeq is a type of outrigger sailboat or trimaran used by the Mandarese people for fishing and as a means of transportation between islands. The size of Sandeq varies, with hulls ranging from 5 to 15 metres long and 0.5 to 1.5 metres wide. Its carrying capacity ranges from a few hundred kilograms to over 2 tons. The sleek shape of the Sandeq makes it more agile and faster than other sailboats. The name of the vessel comes from a word in the Mandar language that means pointy, referring to the bow's shape.

<span class="mw-page-title-main">Padewakang</span>

Padewakangs were traditional boats used by the Bugis, Mandar, and Makassar people of South Sulawesi. Padewakangs were used for long-distance voyages serving the south Sulawesi kingdoms.

<span class="mw-page-title-main">Pencalang</span> Traditional Indonesian merchant boat

Pencalang is a traditional merchant ship from Nusantara. Historically it was also written as pantchiallang or pantjalang. It was originally built by Malay people from the area of Riau and the Malay Peninsula, but has been copied by Javanese shipwrights. By the end of the 17th century this ship has been built by Javanese and Chinese shipbuilders in and around Rembang. However it was a popular choice for Balinese skippers followed by Sulawesian skippers.

<span class="mw-page-title-main">Chialoup</span> Type of sloop used in the East Indies

A chialoup was a type of sloop used in the East Indies, a combination of western (Dutch) and Nusantaran (Indonesian) technologies and techniques. Many of these "boat-ships" were produced by VOC shipwrights in Rembang and Juwana, where the majority of the workers were local Javanese. Chialoups were used by the Dutch East India Company and private merchant-sailors of western and Nusantaran origin.

<span class="mw-page-title-main">Mayang (boat)</span> Type of fishing boat from Java, Indonesia

Perahu Mayang or simply mayang is a type of fishing boat from Java, Indonesia. This type of boat is used mainly for fishing and trading. Historically, this indigenous vessel is also favored by European skippers and private merchants for trading in East Indies: 50% of them were using mayang and pencalang. It is mostly used in northern coast of Java. The major production site is in Rembang, Central Java.

<span class="mw-page-title-main">Patorani</span> Traditional fishing boat from Makassar, Indonesia

Patorani is a traditional fishing boat from Makassar, Indonesia. It is used by Macassan people for fishing, transport, and trading since at least 17th century A.D. Historically this type of boat was used by Gowa Sultanate as war boat.

<span class="mw-page-title-main">Janggolan</span>

Janggolan refers to two different type of perahu from Indonesia. One is from Madura, and the other from Bali. The Madurese janggolan is a type of indigenously constructed boat, meanwhile Balinese janggolan is an indigenous boat with western-styled hull construction.

<span class="mw-page-title-main">Benawa</span>

Benawa or banawa is a type of ship from Gowa, an old principality in the southwest corner of Sulawesi, Indonesia. The earliest record of this vessel is from Hikayat Banjar, which was written in or not long after 1663. In the present, this vessel is already extinct; being replaced by vessels with a similar hull, namely palari and padewakang.

<span class="mw-page-title-main">Palari (boat)</span> Type of Indonesian sailing vessel from South Sulawesi

Palari is a type of Indonesian sailing vessel from South Sulawesi. It was mainly used by the people of Ara and Lemo Lemo, for transporting goods and people. This vessel is rigged with pinisi rig, which often makes it better known as "Pinisi" instead of its name. In Singapore, palari is known as "Makassartrader".

<span class="mw-page-title-main">Pajala (boat)</span> Netting fishing boat from South Sulawesi, Indonesia

Pajala is a type of traditional perahu from western South Sulawesi, Indonesia. It is used mainly for fishing, but in the present it's a Bugis/Makassar name for small to medium-sized boat hull.

<span class="mw-page-title-main">Bago (boat)</span> Traditional boat built by the Mandar people of Sulawesi, Indonesia

A bago is a traditional boat built by the Mandar people of Sulawesi, Indonesia. The hull is of the pajala-type, lightly built and allowing for shallow displacement. The boat is long, with the mast only making up a quarter of its length. A bago can be readily identified as Mandarese boat by its rudderpost style. Smaller-sized bagos are often used as fishing boats from which fishermen cast their nets. The Mandar people prefer using a bago over an outrigger canoe.

<span class="mw-page-title-main">Pelang</span> Traditional boat from Indonesia and Malaysia

Pelang or pilang is a traditional boat from Indonesia and Malaysia. It may refer to several different types of boats in the Nusantara, but commonly they refer to an outrigger canoe. The function differs from where they were used, from transporting people, fishing, to trading. Pilang has been known from at least the 14th century.

<span class="mw-page-title-main">Lancang (ship)</span>

A lancang is a type of sailing ship from Maritime Southeast Asia. It is used as warship, lighter, and as royal ship, particularly used by the people of Sumatran east coast, but can also be found in the coast of Kalimantan.

References

  1. 1 2 3 Bruijn Kops, G.F. de (1854): 'Iets over de Zeevaart in den Indischen Archipel', Tijdschrift voor Nijverheid en Landbouw in Nederlandsch-Indië, 1, pp. 21-69.
  2. 1 2 Liebner, Horst H. (2016). Beberapa Catatan Akan Sejarah Pembuatan Perahu Dan Pelayaran Nusantara. Jakarta: Indonesian Ministry of Education and Culture.
  3. Tijdschrift voor Nederlandsch Indië. v.16:no.2 1854. p. 36.
  4. Tijdschrift voor Nederlandsch Indië. v.16:no.2 1854. p. 37.
  5. 1 2 United States Office of Strategic Services (1944). Native Craft in Southeast Asia Waters, Part II: Sumatra, Malaya, and Adjacent Islands. Office of Strategic Services, Research and Analysis Branch.PD-icon.svg This article incorporates text from this source, which is in the public domain .
  6. Ministry of Education and Culture of the Republic of Indonesia. "Perahu Toop". Pinisi.org. Retrieved 5 January 2021.
  7. Almanak (1861): Almanak (en Naamregister) van Nederlandsch-Indië voor het Jaar (Batavia: Landsdrukkerij).
  8. Tijdschrift voor Nederlandsch Indië. v.16:no.2 1854. p. 33
  9. Tijdschrift voor Nederlandsch Indië. v.16:no.2 1854. p. 364.
  10. Pâris, François-Edmond (1841). Essai sur la construction navale des peuples extra-européens : ou, Collection des navires et pirogues construits par les habitants de l'Asie, de la Malaisie, du Grand Océan et de l'Amérique volume 1. Paris: A. Bertrand.