Cord-marked pottery or Cordmarked pottery is an early form of a simple earthenware pottery. It allowed food to be stored and cooked over fire. Cord-marked pottery varied slightly around the world, depending upon the clay and raw materials that were available. It generally coincided with cultures moving to an agrarian and more settled lifestyle, like that of the Woodland period, as compared to a strictly hunter-gatherer lifestyle. [1]
Pottery was made by gathering clay from hillsides or streams. Other material—shells, stone, sand, plant fibers, crushed fired clay—added to the clay tempers it to prevent cracking and shrinking when dried and fired. [2] Several methods were used to create the rough shape of the vessel: pinching and shaping, paddling, or coiling, the latter of which means to build up a pot with coils of rolled clay. Layers of coiled clay are then pinched, thinned, and smoothed. Another method, paddling, is accomplished by pounding a lump of clay with a wooden paddle against a large stone. The fabric texture may appear on the side of the pottery if the paddle was covered with fabric. Otherwise, the pot could be created by shaping and pinching a lump of clay. [2]
Cord-marked pottery was then made with a paddle and anvil method that was accomplished by pressing cord-wrapped paddles against the side of the pottery to form and thin the pottery. This was done while holding an anvil stone on the inside of the vessel. The fiber cords prevented the paddles from sticking to the wet clay. This created small, parallel ridges in the pottery. [1] Pottery was then dried for two weeks and fired. [2]
The rough surface that was created made it easy to hold on to the vessels, particularly when wet or greasy. The rough surface also allowed "more effective transfer of heat (energy) from a cooking fire to the contents of the pot compared to a vessel with a smooth exterior." [1]
Mostly three types of impressions are obtained by using (1) single strand cord, (2) double strands twisted cord and (3) knots of thick cord in Maipur. The cords are wrapped around a paddle in case of the first two types, while the paddle is covered with a net made by tying knots in series of thick cord in the case of the third type. [3]
In Japan, the Jōmon period is named after its cord-marked pottery. [4] The term Jomon was coined by Edward S. Morse who discovered corded ware at the Omori site in 1867. [3] In Taiwan, the Fengpitou (鳳鼻頭) culture, characterized by fine red cord-marked pottery, was found in Penghu and the central and southern parts of the western side of the island, and a culture with similar pottery occupied the eastern coastal areas. Archaeologically, the prehistory of Taiwan can be subdivided into at least four major cultural sequences. From earliest to most recent, these are the Changpin culture, Tapenkeng culture (coarse corded ware culture), fine corded ware culture (red cord-marked ware culture), and the proto-historical culture. There were also the eastern cord-marked cultures of eastern, central, and southern Taiwan. Pottery of the Suntangpu culture consists mainly of jars, bowls, and basins. Three main kinds of pottery: reddish sandy pottery, orange sandy pottery, and orange clay pottery, are recognized from these red cord-marked wares. Reddish Sandy pottery characterized by red coatings and dominant pyroxene tempers is considered most characteristic of Suntangpu culture. Micro-Raman spectroscopy, XRD, and SEM-EDX can be used on corded Ware pottery to unravel mineralogical composition and can also be specifically used on red cord-marked pottery to help determine whether the same raw materials were used in the red coatings and ceramic bodies by ancient Potters. [5]
In North America, cord-marked pottery is believed to have originated in the Eastern United States prior to 1000 BC and was found in the upper Midwestern United States about 500 BC. Over the next 500 years, pottery-making cultures spread west, south, and northwest into the Great Plains, west of the Mississippi, and into Texas and Oklahoma. [1]
Cord-marked pottery was made in several shapes. An inverted cone shape, with a pointed bottom and up to 2 1/2 feet tall, was used for storing food. The walls of the pottery were very thick, and were too heavy to haul food a great distance. This would have been a great improvement over storing food directly underground without a container. Over time, the pottery walls became thinner and rounder as pottery-makers became more skilled, such as during the Plains Village period (c. a. AD 1100–1450). Round shaped or globular pottery meant that the vessels could be steadied on several small stones or placed directly on a fire for cooking. There were also different rim shaped: flared rims, straight rims, or collared, meaning thickened, rims. Fingernail impressions or incised lines were sometimes added for decoration. [1]
Native groups of people created their own styles, based upon the raw materials that they used or the decorations that they added to the pottery. Some used crushed volcanic stone to temper the clay pottery. Decorations were made with punctuations, impressions, and incised lines. [1] During the Luray phase of prehistoric West Virginia shells were used to temper Keyser Cord-marked pottery.
Cord-marked pottery was made in the plains between the early centuries AD and through to the 1700s. [1] Wilmington Cord-Marked, made of clay or grog and tempered with grit or sherd, was found at the mouth of the Savannah River and along the coastal plain of South and North Carolina. The earliest Wilmington pottery was dated to 500 BC. [6] Cord-marked pottery made by Plain Villagers about 900 years ago called Borger Cordmarked Pottery (found at Landergin Mesa), is named for the nearby town of Borger, Texas. It was made by people who lived in the Texas Panhandle along the Canadian River, believed to be people of the Antelope Creek culture from AD 1100 to 1450. Similar pottery was made in the Oklahoma panhandle, southwestern Kansas, and southeastern Colorado. [1] Cord-marked pottery, made by the Apache during the Tipi Ring period has been found at Picture Canyon in Colorado. [7] Pottery designated as white rock cord-marked pottery was obtained at the white rock site, seven miles east of Boulder and thirty miles north of Denver, Colorado in 1948. [8]
Pottery is the process and the products of forming vessels and other objects with clay and other raw materials, which are fired at high temperatures to give them a hard and durable form. The place where such wares are made by a potter is also called a pottery. The definition of pottery, used by the ASTM International, is "all fired ceramic wares that contain clay when formed, except technical, structural, and refractory products". End applications include tableware, decorative ware, sanitaryware, and in technology and industry such as electrical insulators and laboratory ware. In art history and archaeology, especially of ancient and prehistoric periods, pottery often means vessels only, and sculpted figurines of the same material are called terracottas.
In pottery, a potter's wheel is a machine used in the shaping of clay into round ceramic ware. The wheel may also be used during the process of trimming excess clay from leather-hard dried ware that is stiff but malleable, and for applying incised decoration or rings of colour. Use of the potter's wheel became widespread throughout the Old World but was unknown in the Pre-Columbian New World, where pottery was handmade by methods that included coiling and beating.
Asbestos-ceramic is a type of pottery manufactured with asbestos and clay in Finland, Karelia and more widely in Fennoscandia from around 5000 BC. Some remnants of this style of pottery lasted until as late as 200 AD. These ceramics are able to retain heat longer than other pottery.
Ceramics of Indigenous peoples of the Americas is an art form with at least a 7500-year history in the Americas. Pottery is fired ceramics with clay as a component. Ceramics are used for utilitarian cooking vessels, serving and storage vessels, pipes, funerary urns, censers, musical instruments, ceremonial items, masks, toys, sculptures, and a myriad of other art forms.
The Grand Village of the Illinois, also called Old Kaskaskia Village, is a site significant for being the best documented historic Native American village in the Illinois River valley. It was a large agricultural and trading village of Native Americans of the Illinois confederacy, located on the north bank of the Illinois River near the present town of Utica, Illinois. French explorers Louis Joliet and Father Jacques Marquette came across it in 1673. The Kaskaskia, a tribe of the Illiniwek people lived in the village. It grew rapidly after a French mission and fur trading post were established there in 1675, to a population of about 6,000 people in about 460 houses. Around 1691 the Kaskaskia and other Illiniwek moved further south, abandoning the site due to pressure from an Iroquois invasion from the northeast.
Pottery and ceramics have been produced in the Levant since prehistoric times.
The Jōmon pottery is a type of ancient earthenware pottery which was made during the Jōmon period in Japan. The term "Jōmon" (縄文) means "rope-patterned" in Japanese, describing the patterns that are pressed into the clay.
Mississippian culture pottery is the ceramic tradition of the Mississippian culture found as artifacts in archaeological sites in the American Midwest and Southeast. It is often characterized by the adoption and use of riverine shell-tempering agents in the clay paste. Shell tempering is one of the hallmarks of Mississippian cultural practices. Analysis of local differences in materials, techniques, forms, and designs is a primary means for archaeologists to learn about the lifeways, religious practices, trade, and interaction among Mississippian peoples. The value of this pottery on the illegal antiquities market has led to extensive looting of sites.
Dark faced burnished ware or DFBW is the second oldest form of pottery developed in the western world, the oldest being Dotted wavy line pottery from Africa.
The Younge site is an archeological site located in Goodland Township, Lapeer County, Michigan. It is classified as a prehistoric Late Woodland site and was designated as a Michigan State Historic Site on October 29, 1971. It was added to the National Register of Historic Places on October 29, 1976.
The Juntunen site, also known as 20MK1, is a stratified prehistoric Late Woodland fishing village located on the western tip of Bois Blanc Island. It was listed on the National Register of Historic Places in 1978.
The Moccasin Bluff site is an archaeological site located along the Red Bud Trail and the St. Joseph River north of Buchanan, Michigan. It was listed on the National Register of Historic Places in 1977, and has been classified as a multi-component prehistoric site with the major component dating to the Late Woodland/Upper Mississippian period.
Ancient Egyptian pottery includes all objects of fired clay from ancient Egypt. First and foremost, ceramics served as household wares for the storage, preparation, transport, and consumption of food, drink, and raw materials. Such items include beer and wine mugs and water jugs, but also bread moulds, fire pits, lamps, and stands for holding round vessels, which were all commonly used in the Egyptian household. Other types of pottery served ritual purposes. Ceramics are often found as grave goods.
The Griesmer site (La-3) is located on the Kankakee River in Lake County, Indiana, about a mile southeast of Schneider, in Northwestern Indiana. It is classified as a Prehistoric, multi-component site with Middle Woodland, Late Woodland and Upper Mississippian occupations. The deposits were not stratified, but observation of the types of artifacts present, together with radiocarbon dates, helped to define the sequence of occupations at the site.
The Fifield Site (Pr-55) is located on Damon Run Creek in Porter County, north-western Indiana. It is classified as a late prehistoric, single-component Upper Mississippian Fisher village.
The Riviere au Vase site (20MB3) is located in Chesterfield Township, Macomb County, in southeastern Michigan. The site is on the Riviere au Vase near where it empties into Lake St. Clair. It is classified as a prehistoric, Late Woodland site.
The Anker Site (11Ck-21) is located on the Little Calumet River near Chicago, Illinois. It is classified as a late prehistoric site with Upper Mississippian Huber affiliation.
The Hotel Plaza site (Ls-36) is located near Starved Rock, on the Illinois River across from the Zimmerman site (aka Grand Village of the Illinois. It is a multi-component site representing prehistoric, protohistoric and early historic periods, with the main occupation being an early Historic component associated with the French Fort St. Louis.
The Fisher Mound Group is a group of burial mounds with an associated village site located on the DesPlaines River near its convergence with the Kankakee River where they combine to form the Illinois River, in Will County, Illinois, about 60 miles southwest of Chicago. It is a multi-component stratified site representing several Prehistoric Upper Mississippian occupations as well as minor Late Woodland and Early Historic components.
The Carcajou Point site is located in Jefferson County, Wisconsin, on Lake Koshkonong. It is a multi-component site with prehistoric Upper Mississippian Oneota and Historic components.